Samsung Xpress M2020 Setup Support

The Samsung Xpress M2020 Setup is uniquely designed for home and office use. It is a monochromatic laser printer that prints at the fastest speed. Set the hardware & software of the Samsung printer to enjoy its functions. Find quick procedure in the following topics to configure the hardware and software of the Samsung Xpress M2020 printer.

samsung xpress m2020 setup

How to Setup Samsung Xpress M2020 Printer

  1. Before you start to unbox the Samsung Xpress M2020 printer, ensure that the printer box is sealed properly.
  2. Unseal the box and open it.
  3. Take the Samsung Xpress M2020 printer from the box and place it on a dust-free, flat surface.
  4. Take the toner cartridge and shake it to even the toner inside it.
  5. Unpack the cartridge and insert it into the slot.
  1. Load the paper tray with a bunch of compatible sheets.
  2. Establish the power connection.
  3. Do not use a surge protector set up the power connection as it may cause power fluctuations.
  4. Download & launch the recent version of the Samsung Xpress M2020 Setup software on your computer.
  5. Link the devices and complete the first time Samsung Xpress M2020 printer setup.

Samsung Xpress M2020 Driver and Manual Download

The driver is the essential factor to set up the Samsung Xpress M2020 printer. Avail the software and manual of the Samsung printer by using this site. Locate the Driver Download & Manual Download buttons on this page and click on them to download them. The manual has solutions to solve any problems that arise with the Samsung Xpress M2020 printer. It also includes guidelines to set up the printer.

Samsung Xpress M2020 Driver Windows and Mac

Download the latest version of the Samsung M2020 printer driver from this site for free. You can also avail the software by using the installation CD given in the printer box. The software can also be obtained from the manufacturer’s site.The extension of the driver file for Windows is .exe and .dmg for Mac operating system.

Samsung M2020 Printer Driver Install

The installation procedure is performed after downloading the software of the Samsung Xpress M2020 Setup printer. The process varies depending on the OS versions of your computer or laptop. Once the installation is executed, you can start enjoying the functions of the Samsung M2020 printer after downloading it.

How to Setup Samsung M2020 Wireless

Hope the hardware and software setup of the Samsung M2020 printer is executed successfully. Now you can start connecting the Samsung M2020 printer with your computer. The wireless connection is one of the best methods to connect the printer with your computer. Before starting the wireless setup, check if your router is active.

How to Connect Samsung M2020 Printer to Wifi

  • Power up your router & verify if it provides an active internet connection.
  • Find the Menu button on the operation panel of the Samsung M2020 printer and select it.
  • Choose Network --> Wireless --> WPS Setting --> PBC.
  • Wait for a few minutes.
  • Press the WPS button on your router.
  • The Samsung Xpress M2020 Setup printer gets connected to the router.
how to connect samsung m2020 printer to wifi

Samsung M2020 Airprint Setup

  • Link your Samsung M2020 printer and Apple device to the corresponding network of an access point or router.
  • Open a web browser on your Apple device.
  • Provide the IP address of the printer on the search field and tap Search.Now the SyncThru page appears on the screen.
  • Select the Login link.
  • Type the User ID and passkey.
  • Tap Settings --> Network Settings.
  • Select the AirPrint option in the list and tick the checkbox near AirPrint. Tap Apply.
  • Go to IPP Settings and select Settings.
  • Check if the checkbox next to IPP Protocol is turned ON.
  • Choose the AirPrint option.
  • Enable the checkbox near mDNS Protocols and complete the setup.

Samsung Xpress M2020 Toner Reset

  • Firstly, buy a reset fuse for the Samsung Xpress M2020 Setup printer.
  • You can purchase the fuse from the manufacturer.
  • Make sure that the reset fuse matches the model of the printer’s toner cartridge.
  • Remove the toner cartridge from the Samsung Xpress M2020 printer.
  • You can find a screw head & nail that holds a fuse.
  • Remove the fuse and replace it with the new one.
  • Just push the fuse until you hear a click sound and complete the toner reset process.

How to Hard Reset Samsung M2020 Printer

  • Power on the Samsung Xpress M2020 Setup printer if it is turned off previously.
  • Wait until the Samsung printer powers on.
  • Disconnect the power cable from the Samsung Xpress M2020 printer.
  • Wait for a few minutes.
  • Connect the cable back to the Samsung Xpress printer and power supply.
  • Do not make the power connection utilizing a surge protector as it can cause power fluctuations.

How to Update Firmware Samsung M2020

  • Go to the manufacturer’s site and download the firmware update software.
  • After downloading the software, save it in the desired folder on your computer or laptop.
  • Tap the Windows icon on the display of your computer.
  • Open Control Panel and select Hardware And Sound.
  • Right-click on the name of your printer and click Properties.
  • Go to the Web Services tab and select your printer name.
  • Find the IP address of the printer and note it down.
  • Open a browser on your computer.
  • Type the IP address on the search field.
  • Now the SyncThru screen opens.
  • Provide the ID name and password. Tap Login.
  • Select Maintenance and choose Firmware Upgrade.
  • In the Firmware Upgrade screen, select the Upgrade Wizard button present at the top right corner of the screen.
  • Browse the Firmware file that you have downloaded in the destination folder.
  • Carry on with the instructions on the screen and update the software of the Samsung Xpress M2020 Setup printer.

Samsung Xpress M2020 Troubleshooting

Troubleshoot any issues with the Samsung Xpress M2020 printer using the solutions provided in the below given topics.

Samsung Xpress M2020 Not Printing

  1. Check if the toner cartridge of the Samsung Xpress M2020 printer is installed properly.
  2. Remove the cartridges from the printer to check for ink clog or damage on them.
  3. If the toner cartridges are not in good condition, replace them with a new set.
  4. If there are ink clogs on the cartridge, clean it using a lint-free cloth dipped in glass cleaner or distilled water.
  5. Examine the connection between your Samsung Xpress M2020 Setup printer and computer.
  6. Do not connect the power cable to the surge protector as it may cause power fluctuations.
  7. Delete the Samsung Xpress M2020 printer software on your computer.
  8. Download and install the recent version of the Samsung Xpress M2020 printer software on your computer.

Samsung M2020 Driver Unavailable

  1. Use the Driver Download button provided on this page to get the software of the Samsung M2020 printer.
  2. You can obtain recently released Samsung printer software for free.
  3. The printer software is also available in the manufacturer’s site.
  4. The Sansung M2020 printer software can also be obtained from the installation CD provided in the printer package.
  5. If you find it difficult to download the driver of the Samsung Xpress M2020 Setup printer, call our technical experts and get more solutions.
printer setup support