Instant Samsung Proxpress M4530NX Setup

The Samsung Proxpress M4530NX setup printer performs its functions so effectively. Once you purchase the Samsung Proxpress M4530NX printer, set it up. Carry out the guidelines on this page to configure the hardware and software of your printer. This page also has the troubleshooting methods to fix the printer problems. Even our technical support team helps in solving the Samsung Proxpress M4530NX printer issues.

samsung proxpress m4530nx setup

How to Install Samsung Proxpress M4530NX

  1. Once you purchase the Samsung printer from the manufacturer, check if it is sealed properly.
  2. Unbox the printer box and ensure the printer components are provided in it.
  3. Take the printer from its box and keep it on a flat surface.
  4. Remove all the blue-colored tapes from the printer.
  5. Set the toner cartridge and imaging unit.
  6. Open the front access door of the Samsung Proxpress M4530NX setup printer.
  7. Remove the imaging unit and peel off the protective tapes on it.
  8. Take the toner cartridge from the imaging unit.
  9. Shake the cartridge and fix it back into the imaging unit.
  10. Refix the imaging unit.
  11. Pull the paper tray load enough papers.
how to install samsung proxpress m4530nx
  1. Unpack the power cable enclosed with the printer package.
  2. Link the cable to the corresponding port of the Samsung printer and power supply.
  3. Install the printer software on your computer and complete the printer setup.

Samsung Proxpress M4530NX Driver Download

Get the driver of the Samsung Proxpress M4530NX printer from the installation CD provided in the printer box or the Driver Download on this page. You can get the recent version of the full-featured printer driver that is compatible with the operating system version of your computer or laptop.

Samsung Proxpress M4530NX Driver Mac

  1. You can obtain the driver either from the software CD provided in the printer box or the Driver Download button on this site.
  2. We provide the current version of the Samsung Proxpress M4530NX setup printer driver that suits the operating system version of your Mac system.
  3. To download the printer software from the CD, ensure your Mac system has a disc drive.
  4. Some of the recently manufactured Mac devices do not have a disc drive.
  5. So, copy the content of the installation CD in a flash drive.
  6. Insert the flash drive into your Mac system and paste the content into the destination folder.
  7. Now the Samsung Proxpress M4530NX printer software is successfully downloaded on your Mac system.

Samsung Proxpress M4530NX Driver Windows

  1. Get the Samsung Proxpress M4530NX printer driver from the software CD or the Driver Download button on this site.
  2. The button includes the recent version of the full-featured printer driver that suits the operating system version of your computer or laptop.
  3. Click on the Driver Download button and initialize the download process.
  4. Wait until the download completes.
  5. After downloading the driver, locate it in the desired folder on your computer or laptop.

Samsung Proxpress M4530NX Driver Install

  1. After downloading the Samsung Proxpress M4530NX setup printer driver, click the Mac_Installer folder.
  2. Now the folder opens. Run the Printer Driver Package Installer.
  3. Select Continue and initialize the installation program.
  4. Click the Install button.
  5. Pick Add Printer to include your printer in the list of devices that are connected to your computer.
  6. Finally, tap Close to complete the installation process.
  7. To know if the driver is installed successfully, carry out the forthcoming procedure.
  8. Go to System Preferences on your computer.
  9. Select Printers & Scanners. If the printer name displays on the screen, the driver is installed successfully.

How to Connect Samsung Proxpress M4530NX to Wireless

  1. Power up your router and check if it provides an active internet connection.
  2. Unpack the USB cable provided in the printer package.
  3. Link the cord to the respective port of your printer and computer.
  4. Run the Easy Wireless Setup application.
  5. Continue with the guidelines on the computer screen.
  6. Pick the Wireless Setup method and select the Using a USB cable option.
  7. Click Next and continue with the setup.
  8. Now the installation wizard search for your printer and retrieves the wireless details.
  9. A set of wireless networks appears on the screen.
  10. Provide the network name when the system prompts.
  11. Thus, the Samsung Proxpress printer and computer are connected.

Samsung Proxpress M4530NX Wireless Direct Printing

  1. On the Samsung Proxpress M4530NX setup printer’s control panel, tap the Menu icon.
  2. Select Network --> Wi-Fi --> Wi-Fi Direct.
  3. Turn on the Wi-Fi option on your computer.
  4. Select the name of the printer on your computer and complete the connection between the devices.
  5. Now you can print the document you wish to print on the Samsung Proxpress M4530NX printer.

Samsung Proxpress M4530nx AirPrint Setup

  1. Ensure that your Samsung ProXpress M4530nx setup is powered on.
  2. Also, check whether the printer and the iOS device are connected over a common network.
  3. Keep the printer’s IP address ready and open a browser to enter it in the address bar.
  4. When the SyncThru window opens, click Login.
  5. Provide the network User ID and Password, and under Settings, click Network Settings.
  6. If you find AirPrint in the list on the left side of the window, click the checkbox to enable it.
  7. Click on Apply to store the above changes made.
  8. Click the Setting tab next to Raw TCP/IP, LPR, IRP.
  9. Enable the checkbox near the IPP Protocol and click Apply to save.
  10. Click on AirPrint again in the list.
  11. Click Setting next to Bonjour and enable the mDNS Protocol if not enabled. Click Apply to Save.

Samsung Proxpress M4530nx Cloud Print Setup

These steps are applicable for printers connected to PC or Mac.

  1. Enter the IP address of the printer on your Chrome browser.
  2. Look for the login screen on the top right hand and click on it.
  3. Key in your login credentials (User ID and Password)
  4. The default user id is Admin and the password is sec00000.
  5. If you wish to change your credentials at the time when it is prompted, you can do it.
  6. By clicking on Yes will let you change the id and password and if not required, click No (which is preferred).
  7. Click Settings -> Network Settings -> Google Cloud Print - >OK.
  8. Now, click the URL link that appears on the Printers Description which redirects you to the Google Cloud’s confirmation page.
  9. If you have not logged into the Google account, sign in and then complete the registration by clicking on Finish Printer registration when prompted.
  10. After the registration is complete, it may take a few minutes for your printer to sync with your Google account so that you can print.

Samsung Proxpress M4530nx Toner Reset

  1. Turn off your Samsung ProXpress M4530nx printer before you begin with the toner reset process.
  2. Toner reset includes resetting the chip holder in the imaging Drum unit.
  3. Pull the toner cartridge access door which is above the paper input tray on your Samsung printer.
  4. Remove the toner cartridge and then the drum imaging unit from its slot.
  5. Locate the chip holder which should be visible under the plastic box of the drum unit.
  6. The manufacturer-made chip holder does not contain a fuser inside to reset.
  7. So, pick a copper wire which is small in length and thin as well and insert it straight across the chip holder.
  8. Replace the drum imaging unit and the toner cartridge inside its place and turn on your Samsung proXpress M4530nx setup printer.
  9. The printer initiates with flashing lights and in the meantime, unplug the power cord from the printer while it is turned on.
  10. Again, remove the toner cartridge and drum imaging unit from its place, take the chip out and then remove the copper wire.
  11. Now, reinsert the toner and the drum unit into its place, connect the power cord and then turn on the printer. Your toner should be reset by now.

How to print on Samsung Proxpress M4530nx

Let us see how to print a document using Samsung Pro Xpress M4530nx connected to a Mac system.

  1. Open the application or document whichever you have text to print.
  2. Access the File menu and click Page Setup.
  3. Select settings such as paper size, orientation, scaling, and more, and then choose your printer from the list. Now click OK, open the File menu again and then click on Print.
  4. Confirm the number of copies and the page numbers to print.
  5. Finally, by clicking on Print again produces the output.

Samsung Proxpress M4530nx factory Reset

This solution can be tried by users who have a Windows computer connected to the Samsung ProXpress M4530nx setup printer.

  1. From the Windows search box, type Control Panel and when the list displays the same. Select the Control Panel.
  2. Click on Administrative Tools and then Print Management.
  3. Click Print Servers that display the name of your print server.
  4. Right-click in the white space visible below the print server name and then choose Add or Remove Servers.
  5. Click on Remove All and then OK that resets the printing system completely.

Samsung Proxpress M4530nx Troubleshooting

Troubleshooting with your Samsung ProXpress M4530NX setup is quite easy with our solutions. Not Printing and the printer offline are the most occurring issues with this printer. We have given solutions for these issues as a checklist, which helps you to identify the cause and rectify immediately.

Samsung Proxpress M4530nx not Printing

  1. Verify if both the printer and computer are connected to the same network.
  2. When the printer prompts for the security password, ensure that you have entered the right one.
  3. Check whether the printer, router and the computer are placed near to each other so that they receive proper signal strength.
  4. Determine whether the printer’s IP address set is static.
  5. If the printer seems to be offline, do the following steps with the printer turned on.
  6. First, disable the SNMP feature on the Printer Properties tab.
  7. Go to your system's control panel, click Devices and Printers.
  8. Locate the printer that shows Offline, right-click on it and then click Printer Properties.
  9. Click the Ports tab, ensure that your printer port checkbox is enabled and then click on Configure port.
  10. If the SNMP Status Enabled checkbox is enabled on the Standard TCP/IP Port Monitor window, uncheck it and then click OK.
  11. Close the Printer Properties window and print a network configuration page to confirm that the printer is online.
  12. If nothing is helping you out, then reset the entire printing system and check if you can print.

Samsung Proxpress M4530nx Printer Offline

The solution mentioned below can be followed if the printer does not respond when printing from the computer.

  1. Click Devices and Printers on the Control Panel of your computer.
  2. Right-click on the Samsung ProXpress M4530NX setup printer model and choose Printer Properties.
  3. Click the Ports tab and choose your printer from the list of printers available.
  4. Now, remove the checkmark near the Enable bidirectional support checkbox.
  5. Click on OK to save the chosen option, then click OK to apply the saved changes, and then close the window.
  6. Print a network test page and check if the printer is responding.