Samsung m2885fw Setup Information

Samsung m2885fw setup printer is an affordable device that delivers high-quality output. This printer is suitable for micro office and home use. After getting the printer from the manufacturer, you have to configure it. Carry out the step by step and quick guidelines on this page to set the hardware and software of your Samsung M2885FW printer.

Samsung M2885fw Driver Install

1. Install the driver of the Samsung m2885fw Setup printer after downloading it.
2. Double-click or right-click on the downloaded driver file on your computer or laptop.
3. Carry out the guidelines on the display.
4. Configure the connection method between the printer and computer based on the specifications of the devices.
5. Continue with the guidelines on the screen and complete installing the Samsung M2885FW printer driver on your computer or laptop.

Samsung m2885fw Driver Download for Windows

1. Carry out the forthcoming steps to download the Samsung m2885fw Setup driver on your Windows system.
2. You can get the Samsung M2885FW printer driver from the software CD enclosed with the printer package or the Driver Download button provided on this page.
3. Locate and click on the Driver Download button to start the download process.
4. After downloading the driver, locate it in the destination folder on your computer or laptop.

Samsung m2885fw Driver Download for Mac

1. Download the Samsung M2885FW printer driver on your Mac device either using the Driver Download button on this page or the software CD provided in the printer package.
2. For downloading the driver from the software CD, ensure your Mac device has a disc drive.
3. Most of the recently released Mac devices do not have a disc drive.
4. So, copy and paste the content of the CD into the destination folder on your computer or laptop utilizing a flash drive.

How to Connect Samsung M2885fw to Wifi

1. Turn on your router and check if it provides an active internet connection.
2. Also, power up your Samsung M2885FW printer if it is turned off previously.
3. On the control panel of the Samsung printer, press the Menu button.
4. Utilize the directional arrow and pick the Network option.
5. Select the Wireless option.
6. Carry out the process by selecting the OK button.
7. Tap WLAN Settings --> OK.
8. Configure the Setup option either as Wizard or Custom.
9. Select the Wizard option for automatic setup and Custom for manual settings.
10. Once the Samsung m2885fw Setup printer gets linked to the wireless network of the router, the wireless LED on the printer starts to blink and becomes stable.

Samsung m2885fw Airprint Setup

1. Turn on the Samsung M2885FW printer by force pressing its power button.
2. Connect your Samsung M2885FW printer & computer to the respective network of your router or access point.
3. Open an internet browser on your computer or laptop.
4. Type the IP address of your printer in the address bar.
5. Now a SyncThru page displays on the screen.
6. Select the Login option and type the User ID and password.
7. Note: The default User ID is Admin and password is sec00000.
8. Click Settings --> Network Settings.
9. Pick the AirPrint option in the list that appears on the left side of the window.
10. Enable the AirPrint feature by ticking its checkbox.
11. Click Apple and save the configurations.
12. Select the Settings option near Raw TCP/IP, LPR, IPP.
13. Check if the IPP Protocol is enabled by viewing its checkbox.
14. Tap Apply and complete the setup.

How to Replace Toner on Samsung Xpress M2885fw

1. Open the access cover present at the front of the printer.
2. Hold the handle of the cartridge and remove from the printer.
3. Take a new toner cartridge and unpack it.
4. Shake the cartridge to distribute the toner uniformly.
5. Remove the protective cover on the cartridge.
6. Install the cartridge into the Samsung m2885fw Setup printer.
7. Close the access cover at the front and complete the toner replacement process.

Samsung xpress m2885fw Image Unit Reset

1. Turn off the Samsung Xpress M2885FW printer if it is powered on previously.
2. Disconnect the power cord from the Samsung printer and electrical outlet. Wait for a few seconds.
3. Open the access cover and remove the toner cartridge from the Samsung Xpress M2885FW printer.
4. Remove the imaging unit from the printer.
5. Take a new imaging unit and unpack it.
6. Remove the protective cover on the unit.
7. Install the new imaging unit and refix the toner cartridge.
8. Close the access cover at the front of the printer.
9. Link the power cable, power on the printer, and complete the imaging unit replacement process.

1. Check if the latest version of the Print and Scan doctor application is installed on your computer or laptop.
2. Locate the Windows taskbar and select the Easy Printer Manager icon.
3. Pick the Printer Manager option.
4. Click the name of your printer. Go to the Quick Links section and select the Scan option.
5. Tap the Scan icon to modify scan configurations.
6. The scan settings include paper size, file format, location in which the document to be saved, resolution, and more.
7. After modifying the settings, click the Save button.
8. Tap Yes and start to scan your document.

1. Firstly, configure the fax settings to fax your document or image.
2. On the function panel of the Samsung m2885fw Setup printer, tap the Menu button.
3. Select System Setup --> OK.
4. Pick the Machine Setup option.
5. When Machine ID appears, tap the OK button.
6. Utilize the numbered keypad and provide the ID.
7. Tap the right directional button to view the fax number of your printer.
8. Configure the other settings like Date & Time and Clock Mode.
9. Thus the Samsung M2885FW printer fax setup is made successfully.

1. Turn on the Samsung m2885fw Setup printer if it is powered off previously.
2. Wait until the printer switches on and becomes idle.
3. Disconnect the power cord from the Samsung printer and power supply.
4. Wait for a few minutes.
5. Link the cable to the respective port of the printer and power supply.
6. Do not make the power connection utilizing a surge protector as it can cause power fluctuations.
7. Once you connect the cable, the printer powers on automatically.
8. If the printer does not power on, turn it on by force pressing its power button.