Samsung M2825DW Setup Support

The Samsung M2825DW setup printer is compact and fits any place in your home or office. The paper capacity of the printer is sufficient to load enough papers. After purchasing the Samsung M2825DW printer, set it up. Find the guidelines in the following topics to configure the hardware and software of your Samsung printer. The troubleshooting methods are also provided on this website to solve the printer issues if any. Even our technical experts assist in fixing the problems of your Samsung M2825DW printer.

samsung m2825dw setup

How to Install Samsung M2825DW Printer

  1. After purchasing the printer from the manufacturer, check if it is sealed properly.
  2. Unseal the printer box and ensure the printer components are enclosed with it.
  3. Take the Samsung printer from the box and place it on a flat surface.
  4. Peel off the protective tapes on the cartridge.
  5. Also, remove the packing materials from the printer.
  6. Link the power cable to the respective port of the printer and electrical outlet.
  7. Power up your printer and complete the first time printer setup.
samsung m2825dw printer how to install

Samsung M2825DW Driver Download

Obtain the printer driver on your computer or laptop from the Driver Download button provided on this site for free. We provide the recent version of the full-featured printer driver that is compatible with the operating system version of your computer or laptop.

Samsung M2825DW Driver Mac

  1. Obtain the driver of the Samsung M2825DW setup printer from the installation CD provided in the printer package or the Driver Download button on this site.
  2. We provide the recently released full-featured printer driver that is compatible with the OS version of your computer or laptop.
  3. For downloading the Samsung M2825DW printer driver, check if your Mac device has a disc drive.
  4. The recently released Mac computer or laptop does not contain a disc drive.
  5. So, copy & paste the content of the CD into the destination folder on your computer or laptop using a flash drive.

Samsung M2825DW Driver windows

  1. Get the Samsung M2825DW printer driver on your Windows computer or laptop from the installation CD or the Driver Download button on this site for free.
  2. You can obtain the printer driver from the button for free.
  3. The button includes the recent version of the full-featured printer driver that suits the OS version of your Windows computer or laptop.
  4. Click on the Driver Download button and initialize the download process.
  5. After downloading the driver, save it in the destination folder on your computer or laptop.
  6. The file format of the Samsung printer driver is .exe.

How to Connect Samsung M2825DW to Wifi

  1. Ensure your router is powered on and provides an active internet connection.
  2. On the function panel of the Samsung M2825DW setup printer, select the Settings option.
  3. Select Network Settings --> Wireless Setup Wizard.
  4. Your printer searches for the network name of the router.
  5. Choose the network name of your router and provide its password.
  6. Click the Start menu at the bottom left corner of the computer display.
  7. Type Control Panel in the search bar & pick its option.
  8. Select Devices --> Add a Printer.
  9. Choose the name of your printer and click Next.
  10. Thus your printer and computer are linked utilizing the Wi-Fi method.

Samsung M2825DW Wireless Direct Printing

  1. Turn on your Samsung M2825DW printer, computer, router.
  2. Connect your computer to the network of your router.
  3. Download and install the printer driver on your computer or laptop.
  4. Install the driver after downloading it.
  5. Set the connection method as wireless.
  6. Follow the instructions on the computer screen.
  7. Pick the Using a Direct Wireless Connection method.
  8. Press the WPS button on your printer when the computer prompts.
  9. Go through the guidelines on the display and complete the wireless setup on the Samsung M2825DW printer.
  10. For more instructions to set up the Wireless Direct method, contact our technical support team.

Samsung M2825DW AirPrint Setup

  1. Ensure that your Samsung m2825dw is powered on.
  2. Also, check whether the printer and the iOS device are connected over a common network.
  3. Keep the printer’s IP address ready and open a browser to enter it in the address bar.
  4. When the SyncThru window opens, click Login.
  5. Provide the network User ID and Password, and under Settings, click Network Settings.
  6. If you find AirPrint in the list on the left side of the window, click the checkbox to enable it.
  7. Click on Apply to store the above changes made.
  8. Click the Setting tab next to Raw TCP/IP, LPR, IRP.
  9. Enable the checkbox near the IPP Protocol and click Apply to save.
  10. Click on AirPrint again in the list.
  11. Click Setting next to Bonjour and enable the mDNS Protocol if not enabled. Click Apply to Save.

Samsung M2825DW Cloud Print Setup

  1. Open an internet browser on your computer or laptop.
  2. Type the IP address of your Samsung M2825DW setup printer in the address box and hit Search.
  3. A SyncThru window opens.
  4. Click the login option located at the top right corner of the screen.
  5. Provide the user ID and password.
  6. Note: The default user ID and password are Admin & sec00000.
  7. Follow the guidelines on your computer screen.
  8. Click Settings --> Network Settings.
  9. On the fame located at the left, click Google Cloud Print --> OK.
  10. Now the Google Cloud Print page opens.
  11. Click the URL of Claim URL.
  12. Sign in with your Google account.
  13. Select the Finish Printer Registration button.
  14. Click the Manage Your Printers link and start to perform the printer functions.

Samsung M2825DW Toner Reset

  1. You may need to reset the toner cartridge when the Samsung SL M2825dw setup printer does not read the new cartridge and says it is full but does not print anything sometimes. Follow these simple steps to reset the toner within a few minutes.
  2. Remove the old cartridge and insert the new one into the respective slot.
  3. The printer prints an alignment page but it does not show the toner level accurately.
  4. Now, take the installed toner cartridge out and reinsert the old toner cartridge in the same slot.
  5. Again, remove the old one which you have installed recently and insert one more cartridge into the slot so that it vanishes the memory of the old toner cartridge.
  6. Now, finally, replace the new toner cartridge and check the level of toner, which should show the toner is full.
  7. The moment it shows full, remove the new toner, cover the upper right corner with tape and place it back into the slot.
  8. Again, remove the covered cartridge from its slot and then push the cartridge in without any tape.
  9. Do the same process twice or thrice and your toner ink level becomes full.
  10. Read the complete procedure again and again for at least 3 to 4 times if the toner level is not reset

Samsung M2825DW Imaging Unit Reset

  1. First, turn off your Samsung SL M2825dw before you remove the imaging drum unit.
  2. Remove the toner cartridge and then the drum unit from the Samsung M2825DW setup printer and place it in a dark place.
  3. Push the screw on the drum unit with a screwdriver and get the chip holder out of it.
  4. Dismantle only the thermal fuse and do not disturb any other component.
  5. If your printer does not contain a thermal fuse, insert a small thin copper wire that fits into the size of the chip holder, which acts a thermal fuser.
  6. Re-fix the chip holder into the plastic box.
  7. Replace the drum unit and the toner cartridge into the printer.
  8. Close the printer door and power it on and the printer lights start flashing indefinitely.
  9. With the printer powered on, remove the connection of it from the printer and power source.
  10. Remove the drum unit again and take the chip holder out of the plastic box.
  11. Remove the inserted copper wire and push the chip holder back into its slot.
  12. Reinsert the drum unit and the toner cartridge into the printer again and turn it on back.
  13. Now, the toner drum unit count is reset.

Samsung M2825DW Factory Reset

  1. Follow these quick steps to reset the factory settings of your Samsung SL M2825dw printer.
  2. Access the Menu or Set option on the printer’s control panel.
  3. Using the Up or Down navigation key, choose your printer and press Menu or Set.
  4. With the same Up or Down arrow key, press Reset Printer and then press Menu or Set again.
  5. Press numeric 1 to choose Yes and the reset schedules on your Samsung M2825DW setup printer.

Samsung M2825DW Firmware Update

  1. You can update the firmware from the printer’s control panel if your device has that facility to provide an auto-update.
  2. If not, download the firmware file from the manufacturer’s website using your printer model.
  3. After you download the file, run it and complete the update with the set of instructions that display on your computer screen.
  4. Do not disconnect from the power source during the update as by doing so, can make the printer void.

Samsung M2825DW Printer Troubleshooting

  1. Managing your printer is a tough task. From the queries received from our website visitors so far, we have come up with common problems with Samsung M2825DW along with the solutions. If you need help while performing the instructions on your own, reach our technicians immediately.
  2. Samsung M2825DW not printing
  3. When your printer is troubling you and it stopped printing, try to run the Samsung Printer Diagnostics tool as a first option.
  4. This auto diagnostic tool helps in fixing the printing issue by itself.
  5. After you launch the tool, choose to Diagnose your printer on it.
  6. If the problem is with the printer driver, then the printer driver list screen appears.
  7. This screen shows you the list of printer drivers installed on your PC, the port settings of the driver, the status of network connection, and the default settings of the printer.
  8. In case the issue is due to not installing the right printer, then choose Samsung SL 2825dw from the list and click The Samsung M2825DW setup printer that I want isn’t listed. Add a printer.
  9. Choose the printer to connect and then How to connect your printer.
  10. When the tool begins its job to diagnose, it displays the list of issues detected on your printer and also prompts with a message, Do you want to fix the problem. Click Yes and the problems will be resolved by the tool.
  11. Now, based on the window that pops-up, follow the prompts and complete the printer diagnosis.

Samsung M2825DW Printer Offline

  1. The offline printer issue occurs when there is no communication between the printer and the computer connected to the same network.
  2. Click Devices and Printers on your computer's control panel.
  3. Do a right-click on your printer and choose Printer Properties.
  4. Click on the Ports tab.
  5. Choose your printer from the list available and remove the tick mark before the Enable bidirectional support check box.
  6. Click Apply so that the chosen option is saved and then click on OK to apply the changes made.
  7. Close the current window that you are and print a page using the Samsung M2825DW setup printer.