HP DeskJet Printer Setup 4133e

New! HP DeskJet 4133e Setup

To make use of your printer features without any trouble, first, you have to complete its initial setup. The first-time printer setup always starts with the hardware process. Once it is completed successfully, you can continue with the software installation. By performing these two processes, you will be able to start operating your printer. So, if you have purchased the HP DeskJet 4133e printer and looking out to execute its setup process, no worries. Here, we have discussed the New! HP DeskJet 4133e setup procedure in detail.

Table of Contents

Hardware Setup

You can begin your HP printer’s hardware setup by unpacking the printer package. This is the most required process that you have to perform before you start to operate your printer. With a proper setup procedure, you can utilize all your printer functionalities without an issue. To perform your printer’s hardware setup, just follow the instructions given below.

Start Unboxing The Printer Package

  • First, open the printer package and remove all the contents from the box.
  • Ensure that all the items are delivered without damage.
  • Gently pull your printer out of the package.
  • HP DeskJet Printer
  • Discard all the packing materials and remove the HP DeskJet 4133e printer from the plastic bag.
  • You can now discard the protective tapes inside and outside the printer.

Let’s Turn On The Printer

  • Plug the power cord into the printer's rear and the other end into the wall outlet.
  • Printer Setup Of Your HP DeskJet
  • Next, you have to hit the Power button to turn on your HP 4133e printer.

Proceed With The Ink Cartridge Installation

  • First, open the ink cartridge access door and wait until the carriage moves to the center position.
  • Now, uncover one of the ink cartridges from the package and remove the protective tapes.
  • Gently insert the new ink cartridge into the respective slot until it snaps in its place.
  • Insert The New Ink Cartridge
  • Perform the same instructions (given above) to install the remaining ink cartridges into the slots on your printer.
  • Finally, close the ink cartridge access door.

Begin Loading The Paper

  • First, lift the input paper tray at the back of the printer.
  • Now, slide the paper width guides to the outermost position.
  • Ensure to load the plain white sheets into the tray and adjust the paper width guides. Refrain from doing it too tightly.
  • DeskJet 4133e

Software Setup

  • Start by opening the default web browser on your computer. And then, navigate to your printer’s official support page by entering the correct URL in the search field.
  • Here, pick the Support tab and select the Software and drivers option.
  • Go to the Printer category.
  • Now, input your printer model name - HP DeskJet 4133e under the Enter your product name field and click on the Submit button.
  • Your computer’s operating system will be shown automatically at the top of the next page.
  • In case you want to modify the operating system, click on the Choose a different OS option. Then, pick your respective operating system with its version from the drop-down lists.
  • Click the Change button.
  • Scroll down the window and click the Install button below the Installation Software and Driver section.
  • Click To Install
  • Now, perform the on-screen prompts to download the HP Smart app.
  • After completing the download, install the HP Smart app on your computer.

Well, In The End...

So, here, we have covered the hardware and software setup stages of the New! HP DeskJet 4133e printer. Hopefully, you have learned how to perform your printer setup by executing the above instructions. For further clarifications, go ahead and use the call option on this page to contact our technical experts. To perform wireless setup, click here.

printer setup support