Guide: Lexmark XM7155 Setup

The printer hardware has to be set up before you start the printer operation. Use the following steps for Lexmark XM7155 setup.

Unbox the Printer

  1. Take the printer out of the carton box and place it on a flat surface.
  2. Check for the printer accessories such as power cord, toner cartridge, installation CD, and user manuals in the box and keep them aside.
  3. Now, take off all the packaging tapes and covers from the printer.

Install Toner Cartridge

  1. Open the printer’s front door and lower the multi-purpose feeder.
  2. Take out the toner cartridge and the imaging unit.
  3. Remove the protective materials from them and insert the imaging unit into the printer such that the arrow mark aligns with the rails inside the printer.
  4. After that, shake the toner cartridge and insert the toner cartridge in the printer.
  5. When the cartridge is set, close the multi-purpose feeder door and lower the front door to close it.

Feed Paper in the 550-Sheet Tray

  1. Pull the tray out of the printer and move the green colored paper guides to the edges of the tray.
  2. Arrange the paper neatly such that the print side faces down and place it in the tray.
  3. See that the paper level is below the maximum paper fill indicator and then adjust the paper guides to the paper edges.
  4. Also, make sure not to tighten the paper guides such as the paper cripples or bends.
  5. Carefully place the tray into the Lexmark XM7155 setup. 
Lexmark XM7155 Setup

Power Connection

  1. Get the power cord and attach it to the supply port on the printer and plug the other end to an electrical wall socket.
  2. When the printer turns on, configure the basic settings on the printer display panel.
  3. Following that, proceed to set up the printer driver.

Lexmark Xm7155 Driver Windows 10

Windows 10 Driver for Lexmark XM7155 Printer

Download:

  1. The printer driver is available online for you to download it.
  2. Connect your computer to the internet and open a web browser on it.
  3. Enter the official Lexmark website in the address bar and press Enter.
  4. Now, the Lexmark webpage opens up.
  5. Search for the printer model and access its support page.
  6. In the support page, go to the Downloads section and choose the Operating System from the drop-down menu.
  7. Click the download link to download the printer driver. 

Installation:

  1. Open the driver installer file on the system and start the installation.
  2. Carry out the instructions displayed in the installation window.
  3. Choose a suitable option for the connection method.
  4. Complete the Lexmark XM7155 setup to finish the driver installation successfully.

Lexmark Xm7155 Driver Mac

Mac Driver for Lexmark XM7155 Printer

Download:

  1. Make sure the Mac computer is connected to the internet and then launch a browser.
  2. Visit the official Lexmark support site and find the printer model.
  3. Click the model name to open its support page. After that, select the Downloads tab.
  4. After selecting the Operating System from the drop-down list, click the download link to download the driver on Mac.

Installation:

  1. When the download completes, open the installer file to run the installation.
  2. Keep the printer turned on during the entire process.
  3. Follow the instructions to complete the driver installation and the connection setup.

Lexmark XM7155 Scan Setup

Lexmark XM7155 Scan

Read the below steps to set up the scan operation on your Lexmark XM7155 setup.

  1. Turn on the printer and connect it to your computer via a USB cable, wired, or wireless network.
  2. Make sure you install the printer driver on the system.
  3. Place the original document on the scanner glass or in the ADF, considering all the guidelines.
  4. Next, select the appropriate scan option in the home screen of the printer’s display panel.
  5. Set the necessary scan settings and start scanning.

Lexmark Xm7155 Scan To Computer

If you want to scan to a computer, then consider the following steps.

  1. See that the computer and the Lexmark printer are on the same network.
  2. Keep the document on the scanner glass or in ADF using the correct guidelines.
  3. Add the printer model on the computer settings window and set the printer settings.
  4. On the printer’s display panel, select the Scan to Computer menu and choose the computer name to which you are sending the scanned document.

Lexmark Xm7155 Scan To Email

  1. For email setup, tap the Settings icon on the printer’s home screen and choose E-mail Setup.
  2. Access the Email Setup Wizard menu, enter the email address, and make the required email settings.
  3. Once the changes are done, restart the Lexmark XM7155 setup for the changes to apply.
  4. Place the document on the scanner glass and then tap the Scan to Email menu on the home screen.

Lexmark Xm7155 Maintenance Kit Reset

  1. Initially, replace the roller kit on the printer, switch off the printer, and hold the 2 and 6 buttons on the control panel.
  2. Holding the buttons, turn on the printer and release the buttons when the configuration menu appears on the screen.
  3. Go on to reset maintenance count.
  4. After that, exit the configuration menu.

Lexmark Xm7155 Scan To Network Setup

  1. For the Scan to Network function, you have to set up the network details on the printer console.
  2. Connect the computer and the printer via a wired or Wi-Fi network.
  3. Open the browser window, enter the printer’s IP address to access the Lexmark XM7155 setup page.
  4. Go to the Settings menu, select Apps, and then choose the Apps Management option.
  5. Next, click the Scan to Network option, configure the network settings on which you want the scanned document, and save the settings.
  6. Place the document on the scanner glass and close the cover.
  7. On the printer’s display panel, tap the Scan to Network menu and go on to perform the scan.

Lexmark Xm7155 Imaging Unit Replacement

  1. Keep both the front door and the multi-purpose feeder door open on the Lexmark XM7155 setup.
  2. Take out the toner cartridge and the imaging unit from the printer.
  3. Unpack the new imaging unit, remove the protective tapes, and then insert it into the printer to align the arrow mark with the printer rails.
  4. Following that, place the toner cartridge back into the printer, close the feeder door, and then the front door.

Lexmark Xm7155 Fuser Replacement

  1. Turn off the printer and disconnect the power plug from the printer.
  2. Open the fuser kit access door, loosen the two screws and take out the fuser kit by holding the handle.
  3. Unpack the new fuser kit and insert it into the printer and tighten the screws.
  4. Close the fuser kit access door.

Lexmark XM7155 Setup Troubleshooting Guidance

When your Lexmark printer faces any technical problem, an error message appears on the display panel. Here, we have the troubleshooting steps for few printer issues. You can also refer to the printer’s user manuals to resolve the printer problem. In case you are unable to fix the issue, contact our support team for assistance in solving the issue.

Lexmark XM7155 Offline Error Solution

If the printer goes offline while you are operating it, the operations could get interrupted. Try the below solutions to solve the problem.

  1. Make sure the network and power cables are connected properly. If not, secure the cable ends.
  2. Check if any print job is paused or stalled on the system. If found, remove it and restart the printer.
  3. On your computer, check if your Lexmark XM7155 setup has been set as the default printer. If not, set it as the default printer.
  4. Similarly, go to the Printers & scanners window on your compute, right-click your printer icon, and click the See what’s printing option.
  5. In the new window, click the Printer menu and deselect the Use Printer Offline option.

Fix: Lexmark Xm7155 Paper Jam Error

Sometimes the paper you feed gets jammed in the printer. Follow the below steps to remove the paper jam from the tray.

  1. Remove the paper tray from the Lexmark XM7155 setup.
  2. Locate and take off the jammed paper.
  3. Carefully pull the clogged paper without tearing and then replace the tray.
  4. While loading paper in the tray, make sure to place the paper without folding it.