Lexmark XC2132 is an all-in-one color laser printer. Using this printer, you can perform any printer-related operation over a wired network or direct USB cable connection. If you wish, you can set up this laser printer over a wireless network using the MarkNet N8352 802.11b/g/n wireless network adapter. This Lexmark printer is supported by almost all versions of Windows and Mac OS. This section will guide you in setting up the Lexmark XC2132 printer for the first time. Inside the printer package, you can find the components such as power cord, setup CD, user guide, four genuine toner cartridges, and black & color imaging unit.
Local installation (USB cable):
Network installation (Ethernet cable):
Using the Lexmark printer’s control panel:
The errors occurring on the Lexmark printers can be cleared easily if the exact cause of the issue is identified, and the exact troubleshooting steps are known. Some of the common Lexmark XC2132 printer problems and the required troubleshooting instructions are discussed below. Contact us if you need remote assistance on the same.
The paperweight range supported by the Lexmark XC2132 printer’s standard paper tray is 60-176 (in gsm) or 16-47 lbs (lb.) The optional paper handling offers a 500-sheet tray and a 500 Duo Tray with a 100-sheet feeder. To avoid paper jams on your Lexmark printer, load only the recommended type of paper. Make sure to load papers within the maximum limit and also look that the papers are not folded.