Lexmark X658De Setup

Step-1: Unpack the Printer

  1. Take out the Lexmark X658De setup from the carton and place it on a stable & flat surface.
  2. Look for the printer accessories such as power cord, user manuals, and installation CD and keep them aside safely.
  3. Open the multipurpose feeder of the printer, raise the front cover, and remove the print cartridgeby holding its handles.
  4. Remove all the packaging tapes and protective materials from the cartridge and gently shake the cartridge.
  5. Now, reinstall the print cartridge in the printer and close the multipurpose feeder door.

Step-2: Feed Paper in the Tray-2

  1. Draw out the tray-2 from the printer and refer to the size indicator of the tray.Then move the green paper guides according to the paper size to be loaded.
  2. Next, arrange the paper in a stack such that the print side is down (one-sided printing) or print side is up (double-sided printing).
  3. Place the paper in the tray and shift the paper guides to the sides of the paper, also make sure you do not squeeze the paper.
  4. See that the paper level is below the maximum paper limit and then pushthe tray inside the printer.
  5. Lift the paper output support to prevent the paper from slipping.
  6. Oncethe printer is turned on, configure the paper settings on the display panel.

Step-3: Connect the Network Cable

  1. If you are planning to use the wireless method to connect the printer to the router network, skip this step.
  2. Else, connect anEthernet cable from the router's LAN port to the printer.

Step-4: Power Connection

  1. Take the power cord provided along with the printer and connect it to the printer's supply portand an electrical wall socket.
  2. Wait until the indicator glows solid green, which denotes the Lexmark X658De setup is turned on.
  3. Set the initial settings on the printer’scontrol panel.

Step-5: Software Installation

  1. When the printer hardware setup is complete, go on to install the printer software on your computer.
  2. The printer software enables you to manage and control the printer operations from the computer easily.
Lexmark X658De Setup

Lexmark X658De Driver Download

The Lexmark driver is provided on the installation CD, but you can also download it online using the following steps.

  1. Open the browser window on the computer and visit the official Lexmark website.
  2. Search for the printer model 'Lexmark X658DE' and click it to open the support page.
  3. Now, select the Go to drivers & downloadslink at the right end of the page.
  4. In the Downloadspanel, choose the Operating System from the drop-down menu and click the download link.
  5. When the driver download is complete, open the driver installer file to start the installation.
Driver for Lexmark X658De Printer

Lexmark X658De Manual Download

The Lexmark X658De setup user manual booklet is given to you during the purchase. In case you lose it, you can download the user manual in PDF format using the following steps.

  1. Go to the official Lexmark site from aweb browser on your computer.
  2. Navigate to the Product Supportsection and click the User Guide
  3. Once the page opens, click the Manualstab
  4. Then click the download link under Manuals & Guides to download the user manual to the computer.
User Manual for Lexmark X658De Setup

Lexmark X658De Toner Cartridge Replacement

When the toner cartridge level is low, an alert message appears on the display panel, and the print seems to be faded. In such a case, replace the used toner cartridge with a new one.

  1. Get a genuine print cartridge for your printer model from the Lexmark store.
  2. Open the multipurpose feeder door, lift the front cover,and take out the old print cartridge.
  3. Now, unpack the new cartridge and remove the packaging materials from it.
  4. Slightly shake the cartridge, place it inside the Lexmark X658De setup, and close the feeder door.
  5. Again,start printing and check if the print quality is good.

Lexmark X658De Maintenance Kit Reset

If you have replaced the maintenance kit in the Lexmark printer, reset the maintenance counter using the below steps.

  1. Disconnect the power cord of the printer and turn it off.
  2. Now, press and hold the 2 & 6 keys together on the control panel keypad.
  3. Connect the power cord to turn on the printer.
  4. Whenthe progress indicator appears on the display panel, the configuration menu shows up.
  5. Choose the Reset maintenance Countoption and close the configuration menu.
  6. Wait until the Lexmark X658De setup restarts and the home screen appears on the display panel.

Lexmark X658De Wifi Setup

Use the below steps to set up the printer on a wireless network.

  1. Note: If your printer does not have the in-built Wi-Fi capability, then you must install the Lexmark N4050e Wireless Print Server on your printer. Purchase it and follow the instructions given in its user manual to install it.
  2. Turn on the wireless router network and connect your computer to it.
  3. Make a note ofthe Wi-Fi network name and password for later use.
  4. Keep the printer turned on during the entire process.
  5. Either insert the installation CD or download the printer driver andthen open the installer
  6. When the printer setup window appears on the screen, click Install.
  7. Following that, read the license agreement and select Agreeto continue.
  8. Click Suggestedand then select the Wireless Network Attach
  9. Next, use a USB cable to connect the printer and your computer.
  10. Once the computer detects the printer, the printer will beconfigured by the software and the message to disconnect the USB cable will appear.
  11. Continue following the guided instructions to complete the wireless setup successfully.

Lexmark X658De Firmware Update

If you are using the old Lexmark X658De setup firmware, the printer operation can get slower or interrupted, making things difficult. You can find the updated firmware on the Lexmark website.

  1. Open aweb browser on your computer and go to the Lexmark website.
  2. Find the printer model using the search bar and access its support page.
  3. Onthe support page, click Go to drivers & downloads below Features on the right side.
  4. Under Drivers & Software, below Recommended Firmware, you can find the download link for the latest firmware.
  5. Check the updated date at the right end of the link and click the link to download it tothe computer.
  6. The printer and the computer with the latest firmware file should be connected.
  7. Now, go to the printer and you couldsee the error message "Invalid error code" on the printer's screen. 
  8. Load enough paperin the printer and then press the Menu button.
  9. Navigate down to the Reportsoption and press the Select button.
  10. Again,navigate down and select Menu Settings Page.
  11. When the printer begins to print, the message "Printing Menu Settings Page" appears on the display panel.
  12. Select a firmware update method and continue with the instructions to complete the update.

Lexmark X658De Scan Function

The Lexmark X658De setup is capable of performing the scan function using the scanner glass and ADF, which uses the single-pass duplex scanning function. Also, when connected to a computer, the computer must have the recommended scanner driver installed on it. Without the scanner driver, it is not possible to scan a document and save it on your computer.

Lexmark X658De Scan Driver

The printer needs the scan driver to perform the scan operation. Read the following steps to download the scan driver on the computer.

  1. Open the printer model's support page in the browser window and go to the Drivers & Downloads page.
  2. Next, search for the keyword "scanner driver" and view the results.
  3. Click the topmostresult and proceed to download the scanner driver.
  4. Install the driver on the system to scan your documents effortlessly.

Lexmark X658De Scan To Email

  1. Check if the Lexmark X658De setup is connected to the internet.
  2. On the printer’shome screen, select the Settings icon and choose Email Setup.
  3. Once the Email setup wizardscreen appears, fill in the necessary server details and save it.
  4. Place the document on the scanner glass of the printer and close the scanner cover.
  5. Select the FTPmenu on the printer's home screen and then type the FTP address or the email address.
  6. Tap Send itto send the scanned document to the email.

Lexmark X658De Scan To Computer

  1. Check whether the printer and the computer are connected.
  2. Place the document on the scanner glass or load the document in the ADF of the printer.
  3. Open abrowser on the computer, input the printer's IP, and press Enter.
  4. When the printer page opens up, click the Scan Profile menu and then select Create.
  5. Make the required scan settings by choosingthe destination computer and the storage location for the output file.
  6. Following that, enter a scan name.Then click Submit and review the scan profile you have
  7. Once the scanning is done, go to the destination location on the computer, and find the scanned document.

Lexmark X658De Scan To Folder

  1. If you want to save the scanned document on a particular folder on acomputer, follow the below-mentioned steps.
  2. Place the document on the scanner glass or load it inthe ADF.
  3. Connect a USBflash drive to the USB port of the printer and then tap Scan to USB drive.
  4. Set the scan settings and select Scan It.
  5. Oncethe document is saved on the USB drive, disconnect the drive and connect it to the computer.
  6. Move the scanned document from the USB drive to the desired folder on the computer.

Lexmark X658De Setup Troubleshooting Guidance

Lexmark X658De Paper Jam Error

  1. When there is a paper jam in the tray, tap Status/Supplieson the display panel.
  2. Take out the tray from the printer, take off the damaged paper fromthe tray, and remove the jammed paper from inside the printer.
  3. After that, place the tray back in the printer and select Continue.
  4. If the paper jam error message reappears on the screen, take out the other trays.
  5. Remove the paper fragments from inside and insert the traysinto the printer.
Lexmark XC6152 Troubleshooting

Guide: Lexmark X658De Offline

  1. If you have connected the Lexmark X658De setup to aWindows system, open the Printer and Devices menu from the Settings Right-click the printer model name and click Use printer online. Check if the printer is still in the offline mode.
  2. Verify if the printer and the computer are connected to the same router network and check the network cable connection.
  3. See if the printer's power cord is connectedproperly. If not, then tighten the ends and turn on the printer.

Steps: Lexmark X658De Reset

Resetting clears the printer memory completely and resets the printer settings to the default factory settings. If you are unable to troubleshoot the printer error, then proceed with the reset.

  1. On the printer's home screen, tap the Settingsicon and choose General Settings.
  2. Next, select Eco-Modeand then tap the Off option to perform the factory reset.
  3. Once the factory reset is initiated, the Lexmark X658De setup will
printer setup support