Lexmark X5650 Setup - All-in-One InkJet Printer

Lexmark X5650 is an inkjet printer that enables you to print, copy, fax, and scan. But, before operating this printer without an issue, you have to complete the initial setup properly. When it comes to the printer’s initial setup, you have to proceed with the two main processes. The very first step is to perform the hardware setup, such as unboxing the newly purchased printer and executing the initial operation. So, to complete the Lexmark X5650 setup without trouble, we have included simple guidelines. Just go ahead with the below instructions.

Table Of Content

Unpack The Lexmark X5650 Printer

  1. Take out the printer supplies such as the power cord, telephone cord, software CD, quick setup sheet, and ink cartridges.
  2. Now, pull out the Lexmark X5650 printer from the package and start discarding the packing materials and protective tapes.
  3. Lift the printer’s control panel to the locking position and pull out the paper output tray.
  4. Open the paper support and slide its adjustment lever to extend the paper width guides.
  5. Load the plain white sheets and slide the adjustment lever to adjust the paper width guides.
  6. Next, connect the power cord to your printer’s rear and to an electrical outlet.
  7. Lexmark X5650 Setup & Ink Replacement
  8. Press down the Power button on the Lexmark printer and configure the basic printer settings such as language, region, time, and date.
  9. If you wish to use the fax function, connect the telephone line cord, and configure the fax settings.
  10. Open the printer’s top cover to access the ink cartridge area.
  1. Next, unpack the black ink cartridge and remove the protective tape.
  2. Unpack the color print cartridge and insert it into the right slot.
  3. Make sure that you have firmly removed the tape from the ink cartridge before loading it into the respective slot.
  4. Next, unpack the black ink cartridge and remove the protective tape.
  5. Gently insert it into the left ink carrier inside the printer.
  6. Now, close the top cover and press the OK button to print an alignment page.
  7. Once the alignment process is completed, start installing the printer driver on your computer using the software CD.
  8. You can also download and install the printer driver from the official Lexmark website.
  9.  Lexmark X5650 Setup
  10. Once you have completed the driver installation and the connection setup, you can start to utilize your printer functionalities directly from your computer.
  11. Within these instructions, you can complete the Lexmark X5650 setup.

Lexmark X5650 Driver For Windows 10 [Download & Install]

Unfortunately, the Lexmark X5650 printer driver for the Windows 10 operating system is unavailable on the official Lexmark website. Though, it is possible to download and install your Lexmark X5650 printer driver on your Windows 10 computer using the USB connection method. By doing so, you don’t have to download and install any additional driver on your computer. So, just perform the given instructions below.

Driver Installation Using The USB Connection Method

  1. First, you have to connect the Lexmark X5650 printer to your Windows 10 computer using a proper USB cable.
  2. Make a right-click on the Windows icon on your computer’s main screen and navigate to Control Panel.
  3. Select the Hardware and Sound option, followed by Devices and Printers.
  4. Setting Up Lexmark X5650 Printer
  5. Click the Add a Printer button and pick your printer model name.
  6. In case your printer is not found, select The printer that I want isn’t listed.
  7. Here, choose the Add a local printer or network printer with manual settings option and select Next.
  8. Click the Windows Update button and wait until the system displays the list of printers.
  9. Choose Lexmark from the manufacturer's list and select your desired printer driver from the displayed list.
  10. Type your printer model number in the required field and click Next.
  11. Go for the Set as the default printer tab and verify your printer functionalities by clicking the Print a test page button.
  12. If your printer prints without an issue, the driver is installed successfully on your Windows 10 computer.
  13. Finally, click Finish to complete the driver setup.

Lexmark X5650 Driver For Windows 8 [Download & Install]

Carry Out The Below Steps To Download And Install The Lexmark X5650 Printer Driver On Your Windows 8 Computer.

  1. Connect your computer to the local wireless network first and then check whether you have a standard Internet connection.
  2. Make sure that you have uninstalled the previously installed Lexmark printer driver on your Windows 8 computer.
  3. Close all the running programs and open the default browser.
  4. Navigate to the Lexmark official website and type your printer model number into the search panel.
  5. Click the Go button and select the Drivers & Downloads option in the Product Support section.
  6. Choose your desired language and select Windows from the Operating System drop-down menu.
  7. Lexmark X5650 Printer Driver For Your Prefered Windows
  8. Click on the Please Select Version field and pick the Windows 8 option.
  9. Under Recommended Driver, click the driver download link.
  10. Next, click the I agree-download button to start downloading the printer driver on your Windows 8 computer.
  11. After downloading the driver file, click Done and go to the Downloads folder.
  12. Navigate to the driver file and start the installation process.
  13. Next, start connecting your printer and computer using the USB cable.
  14. Once you have completed the driver installation process, verify the print function.
  15. To make the driver download process even easier, we have included the Driver Download button for your Windows 8 computer. Just click the below button.

Lexmark's Driver Windows 7 [DOWNLOAD & Install]

You can go with the below instructions to download and install the Lexmark X5650 printer driver on your Windows 7 computer.

  1. You should not connect the Lexmark printer to the computer before starting the driver installation process.
  2. On your Windows 7 computer, open the default browser and go to the official Lexmark website.
  3. Input your printer model in the search panel and hit the Enter key.
  4. Otherwise, choose your printer from the displayed list.
  5. Under Product support, click the Drivers & Downloads tab and choose your desired language.
  6. Click On Agree To Lexmark Printer Driver
  1. Select the Windows option from the Operating System pull-down menu.
  2. Under Recommended Driver, click on the link to go to the driver download page.
  3. Next, scroll down the page and click the I agree-download button to start downloading the driver on your Windows 7 computer.
  4. After completing the download, launch the driver file to begin the installation process.
  5. Perform the on-screen prompts to complete the driver installation on your computer.
  6. After completing the driver installation, click the Test Print button to print from your computer.
  7. Makes sure that you have loaded the paper into the paper input tray.
  8. If your Lexmark printer prints the test page properly, the driver installation is executed successfully.
  9. In case you want to download the Lexmark X5650 printer driver on your Windows 7 computer with a single click, make use of the Driver Download button given below.

Your Printer's Wireless Setup

  1. First, make sure to turn on your Lexmark X5650 printer and the Wi-Fi router.
  2. Check whether you have completed the basic printer settings before performing the wireless setup.
  3. Connect your computer to the Wi-Fi router and check whether you have a standard Internet connection.
  4. Now, insert the software setup CD into the CD/DVD drive on the computer and start the driver installation.
  5. In the License Agreement window, click the Accept button and proceed with the on-screen instructions.
  6. Lexmark X5650 Driver
  7. Once prompted, choose the Wireless connection option as your connection type.
  8. Next, follow the instructions provided on the setup wizard screen to complete the connection setup.
  9. Once your printer is connected to the wireless network, print a test page and verify the connection.
  10. ====================================

How To Change Ink Cartridge On Lexmark X5650

When the installed ink cartridge on your printer is empty or low, you have to replace them. To do so, perform the below steps.

  1. First, ensure that your Lexmark X5650 printer is turned on.
  2. Now, open the top cover of your printer and lift the cartridge levers.
  3. Take out the empty/low ink cartridges without damaging the internal parts.
  4. Uncover the new ink cartridge and remove the protective tape.
  5. If you are replacing the color ink cartridge, make sure to insert it into the right ink carrier.
  6. If you are replacing the black ink, insert it into the left ink carrier.
  7. Check whether the cartridges are installed correctly into their slots.
  8. Lexmark X5650 Ink Catridge Replacement
  9. Next, close the ink lid and the top cover.

Lexmark X5650 Scan To Computer

Using the printer’s control panel:

  1. Turn on your Lexmark X5650 printer and connect it to your computer.
  2. Load the original with the scan side facing up in the ADF.
  3. Otherwise, place the document with the scan side facing down on the scanner glass.
  4. Now, go to the printer’s control panel and press the Scan button.
  5. Lexmark Printer Scanner Setup
  1. Make sure that you have connected the Lexmark X5650 printer to the computer appropriately.
  2. Press OK on the printer’s control panel and wait until the printer lists the downloaded scan applications.
  3. Use the arrow keys to choose the desired scan application and press the OK button.
  4. Select the quality you need and the size of the original document using the arrow buttons.
  5. Press the OK and the Start buttons.
  6. Now, the printer will start the scanning process, and a copy of the scanned document will be sent to the connected computer.

Lexmark Scan To PDF

Performing the Scan to PDF process will save the scanned document as a PDF file on your computer. If you are looking out to scan a document as a PDF file on your Lexmark X5650 printer, follow the below instructions carefully.

  1. Make sure to download the Lexmark ScanBack Utility software on your computer.
  2. Ensure that your printer is turned on.
  3. Check whether your printer and computer are on the same network.
  4. On your computer, open the Lexmark ScanBack Utility file and then click Next.
  5. Make a click on the Setup button, and then add the IP address of your printer. You can view the IP address on your printer’s home screen.
  6. Next, click the Close and Next buttons.
  7. Pick the size of the original document, and click Next.
  8. Select the file format as PDF with the resolution you want, and click the Next button.
  9. Enter a unique scan profile name, and then click Next.
  10. Use the Browse button to search for the correct location on your computer to save the scanned document.
  11. Next, input a file name, and click the Save button.
  12. Load the original with the scan side facing up in the automatic document feeder.
    Lexmark X5650 Scan To PDF
  1. Otherwise, load the document with the scan side facing down on the scanner glass.
  2. Press the Scan button and hit OK.
  3. Proceed with the on-screen prompts and complete the scanning process.

Lexmark X5650 Troubleshooting

Some of the common errors like paper jams, offline printer, and connection errors can be resolved using simple troubleshooting methods given on our page. If necessary, you can also refer to the user guide that comes along with the printer. In most cases, the printer errors are due to incomplete installation and improper maintenance. 

How To Fix Your Printer's Paper Jam Issue

If your printer encounter’s paper jam issue, it will not be able to proceed with any print jobs. To fix the paper jam issue on your printer, just follow the below instructions.

  1. First, ensure to turn off the Lexmark X5650 printer.
  2. Now, open the top cover and check if there is any jammed paper inside the printer.
  3. If yes, remove it using both hands.
  4. In case the issue still continues, check the rear tray on your printer.
  1. Open the rear tray and look for the jammed paper.
  2. If you detect any jammed paper inside the tray area, carefully remove it.
  3. After removing all the jammed paper from the printer, check if the issue is resolved.
  4. To avoid paper jam errors in the future, fan the sheets before loading them into the paper input tray.

Lexmark X5650 Offline

Usually, the offline error will occur when the printer settings are not correct on your computer. In this case, your printer will not be able to communicate with your computer and will stop the printing process. So, to get your Lexmark X5650 printer back in online mode, follow the below steps.

Check The Printer Status

  1. Go to the Windows menu on your computer’s main screen and open the Control Panel window.
  2. Now, select the Hardware and Sounds option.
  3. Navigate to the Devices and Printers option from the list.
  4. Right-click on your printer’s icon and select See what’s printing.
  5. Deselect the Use Printer Offline option under the Printer tab.
  6. Otherwise, uncheck Pause Printing if it is selected.
  7. Next, check whether the printer is back in online mode.
  8. If the issue continues, perform the below instructions to set your printer as default.
    Lexmark X5650 Wireless Setup

Set Your Printer As The Default One

  1. Go to the Windows icon at the bottom-left corner of your computer.
  2. Launch the Control Panel window and navigate to Devices and Printers.
  1. Now, the available printer list will appear on the screen.
  2. Right-click on your Lexmark X5650 printer’s icon and select the Set as a default printer option.

For Windows 10 Default Printer Setup

  1. Select the Windows icon on your computer and open the Settings window.
  2. Choose the Devices menu and click on the Printers & Scanners option.
  3. Make sure to deselect Let Windows manage my default printer.
  4. Now, choose your printer from the list.
  5. If your printer appears multiple times, select the printer in the online status.
  6. Choose the Manage option and click Set as default.
  7. Check whether the issue is solved.
    How To Set My Printer As Default

The Bottom Line

Thus, on this page, we have covered the hardware and software setup of the printer. Also, we have included the troubleshooting solutions for offline printer and paper jam issues. Hopefully, now, you have learned how to perform the Lexmark X5650 setup by executing the above instructions. For further clarifications, use the Click to call button to contact our technical experts.

Note: Guidance For Lexmark Maintenance Kit Setup

printer setup support