Lexmark X264dn Setup Guidance

Lexmark X264DN is a multifunctional printer suitable for small workgroups. The printer has print, copy, and scan functions. You can also configure the wireless connection and print wirelessly from your computer. It contains a 50-sheet auto document feeder for easy scanning and copying. The printer also saves time by duplex printing. Lexmark X264DN is a monochrome laser printer with rapid printing and scanning features. The print speed of this printer is up to 28 pages per minute.

If you want to do Lexmark X264dn setup for the first time, follow the steps that are given below.

Step 1: Unpacking the printer

  1. Take out the printer from the carton and check the components included in the package.
  2. The printer package consists of the following.
  3. Phone cable or adapter
  4. Operator panel overlay
  5. Photoconductor kit
  6. Software and documentation CD
  7. Safety sheet
  8. Setup guide
  9. Tray
  10. Power cord
  11. Warranty statement
  12. Dispose of the protective films and tapes from the printer.
  13. Now, connect the tray in the ADF feeder.
  14. Lower the printer cover and pull out the tag. Then, remove the drum unit.
  15. Remove the outer sheet cover on the cartridge.
  16. Fix the drum unit and cartridge into the printer.
  17. Finally, close the door.
Lexmark X264dn Setup

Step 2: Loading Paper

  1. Pull out the paper input tray located at the bottom of the printer.
  2. Slide the paper guides according to the size of the paper that you are going to load.
  3. Fan a stack of paper, load the paper, and move the paper guides to the edges of the paper stack. 
  4. Ensure that you load paper only below the maximum paper mark.
  5. Now, insert the paper input tray back into the printer.

Step 3: Connecting the power cord

  1. Connect the power cord to the rear side of the printer.
  2. Plug the other end of the power cord to an electrical outlet.
  3. Turn on the printer by tapping the Power button and set the required initial settings on the Lexmark X264dn setup.

Step 4: Installing the printer software

  1. Insert the installation disc into the CD drive of your computer.
  2. If you don’t have a CD drive, download the software from the official Lexmark website.
  3. Choose the connection type when prompted.
  4. After installing the software, you can print from your computer easily.
  5. For Direct USB connection, connect the printer and computer using a USB cable. Connect the USB cable only when prompted while installing the printer software.

Lexmark X264dn Driver Free Download

Driver for Lexmark X264dn Printer

If your computer doesn’t have a CD drive, you can download the driver by following the instructions given below.

  1. Go to the official Lexmark website to download the driver for your computer.
  2. Select the Support tab and navigate to the Customer Support section.
  3. Choose the Universal Print Driver under the Drivers & Utilities link.
  4. Click the Download option and wait until the download process is complete.
  5. Run the installer file and continue with the on-screen instructions to install the printer software.
  6. You can also click on the Driver Download button on this page to download the driver for the printer.

Lexmark X264dn Driver Win 10

Windows 10 Driver for Lexmark X264dn Printer

Proceed with the steps that are given below to download and install the driver on your Windows 10 computer.

  1. Open the official Lexmark website from a web browser on your Windows 10 computer.
  2. Navigate to the Support page by choosing your region.
  3. Type the printer model number and click Go.
  4. Select the Support & Downloads link and click the Downloads tab.
  5. Choose your operating system as Windows from the drop-down list.
  6. Now, select the OS version from the displayed list.
  7. Select the required driver and download it to your computer.
  8. Double-click on the installer file to install the printer software.
  9. Continue with the on-screen instructions to complete the driver installation.

Lexmark X264dn Driver Mac

Mac Driver for Lexmark X264dn Printer

Proceed with the steps that are given below to download and install the Lexmark printer driver on your Mac device.

  1. Open a browser and go to the official Lexmark site.
  2. Click the Supports tab and choose your printer model from the displayed list.
  3. Otherwise, enter the printer model number in the Search section and hit the Enter key.
  4. Go to the Support and Downloads section and select the Downloads tab.
  5. Choose your operating system as Mac and select your version.
  6. Extract the downloaded file and double-click on the installer file. Then, click Continue.
  7. Choose your language and accept the License Agreement.
  8. Click on the Install button to begin the Lexmark driver installation.
  9. When prompted, enter the Mac password. Then, click Install Software.
  10. Choose the Connection type according to your preference and wait until the installation is complete.
  11. Open the System Preferences window on your Mac and go to Printers & Scanners. Then, add the printer to your Mac device.

Lexmark X264dn Driver Installation

Carry out the steps given below to install the Lexmark driver on your computer.

  1. Insert the installation disc into the CD drive of your computer.
  2. If your computer doesn’t have a CD drive, download the driver from the official Lexmark website.
  3. Run the installer file by double-clicking it. 
  4. When prompted for User Access Control, select Yes.
  5. Now, the installation wizard will appear. Click on the Start button.
  6. Select Accept to agree with the terms and conditions of the License Agreement.
  7. Click on the Install driver button and click Next.
  8. Choose the connection type when prompted.
  9. Complete the rest of the installation process by following the instructions displayed on the screen.
  10. For a direct connection, connect your printer and computer using a USB cable.
  11. To connect over a network, select the Wireless connection option.

Lexmark X264dn Manual Download

User Manual for Lexmark X264dn Printer

Have you lost Lexmark X264dn setup’s user manual? If so, consider the steps that are given below to download the manual.

  1. Go to the official Lexmark site from your web browser.
  2. Choose your region and language and go to the Customer Support tab.
  3. Navigate to the Device Support section and type your printer model number in the Search section. Then, click on the Go button.
  1. Once you are on the Lexmark printer's support page, click the Manuals & Guides link on the left panel.
  2. Select the User's Guide PDF option to open the manual.
  3. Now, click on the Download icon on the PDF page to download the User manual.

Lexmark X264dn Wireless Setup

If you want to set up a wireless connection on the Lexmark printer, proceed with the steps that are given below.

  1. Make sure to configure your Wi-Fi router prior to the connection. Also, keep it turned on.
  2. Now, connect your computer to the wireless network.
  3. Connect the Lexmark printer to a power source and turn it on.
  4. Insert the installation disc and install the printer software on your computer. 
  5. You can choose the connection method as the Wireless Network Attach option.
  1. Remove the label over the USB port of the printer.
  2. Now, connect one end of the USB cable to the printer's rear side and fix the other end to your computer.
  3. Complete the rest of the installation by following the on-screen instructions.
  4. You can remove the USB cable once the installation is complete.
  5. Note: In case your printer does not support the wireless connectivity, then it might have the optional port for Lexmark Wireless Print Server. Install the print server on your printer to connect over a wireless network.

How To Change Cartridge Lexmark X264dn?

If you run out of ink, proceed with the steps given below to change the toner cartridge.

  1. Press the button located at the left side to lower the cartridge door.
  2. Squeeze the release button under the photoconductor unit.
  3. Now, pull out the used toner cartridge by holding the handle.
  4. Unpack the new cartridge and gently shake it to spread the ink on all sides.
  5. Remove the packing materials from the cartridge and insert the cartridge into the Lexmark X264dn setup.
  6. Press the toner cartridge down until it clicks into its position and close the cartridge access door.
  7. Check the print quality after installing the new toner cartridge.
How To Change Cartridge Lexmark X264dn?

Lexmark X264dn Scan Function Assistant

You can scan either from your computer or directly from the control panel of the printer. The Lexmark printer supports scanning over the network and scanning directly when connected by a USB cable. You can follow the scan methods given below to scan a document or photo.

Lexmark X264dn Scanner Driver Download

  1. If you want to scan from your computer, you have to install the scanner driver. Carry out the steps that are given below to download and install the scanner driver on your computer.
  2. Launch a browser and enter the official Lexmark website’s URL in the address bar.
  3. Choose your language and region. Then, navigate to the Support page.
  4. Choose your printer model and go to the printer’s page.
  5. Click Support & Downloads and go to the Downloads tab.
  6. Choose your operating system and version from the drop-down list.
  7. Select the Scanner driver and click the Download button.
  8. Double-click on the installer file to install the scanner driver.
  9. Continue with the instructions displayed on the screen to install the scanner driver.

Lexmark X264dn Scan To Pc

  1. If you want to scan a document to your PC, you don’t have to connect the printer directly to your computer. You also connect the printer over the network. Proceed with the steps that are given below to perform the scan to PC operation.
  2. Load the document you want to scan on the scanner glass of the Lexmark X264dn setup.
  3. If you wish to scan multiple pages, you can insert them into the ADF feeder.
  4. Type the IP address of the Lexmark printer in the address bar of your browser.
  5. Select Scan Profile and click Create.
  6. Now, select the required scanning preferences and click Next.
  7. Choose a preferred location on your computer to save the scanned document.
  8. Type a profile name and click Submit. Now, press the Scan button.
  9. Once the scan is completed, open the location you have previously set on your computer to find the copy of the scanned documents.

Lexmark X264dn Scan To Email Setup

  1. If you want to scan to a document to your email from the Lexmark printer, proceed with the steps given below.
  2. Type the Lemark printer’s IP address in the address bar of your browser.
  3. If you don’t know the IP address, print the network configuration sheet on the printer to locate it.
  4. Go to Settings and select the TCP/IP section.
  5. Click E-mail/FTP settings and SMTP setup.
  6. Once you have set the required settings, click on the Submit button.
  7. Now, you can scan to email from the printer.

Lexmark X264dn Scan To Pdf

  1. You can use the control panel of the printer to perform the scan to PDF operation. The steps for this are given below.
  2. Place the document on the scanner glass with the print side facing down.
  3. If you are loading the document in the ADF feeder, insert it facing up
  4. Adjust the paper guides if you are loading the document in the ADF feeder.
  5. Tap the Scan button on the control panel of the Lexmark X264dn setup.
  6. Wait until the scan process is completed.
  7. When the scan software appears on the screen, choose the required preferences.
  8. Select the File type as PDF and save the document to a preferred location on your computer.

How To Reset Lexmark X264dn Printer?

  1. You can reset the Lexmark printer if you are facing any issues that could not be resolved. Proceed with the steps that are given below to reset the printer.
  2. Press the Menu button on the control panel of the printer.
  3. Now, go to the Utilities menu and press the Select button.
  4. Tap the Menu button until the Factory defaults section appears on the screen.
  5. Now, tap Select and choose the Restore option.
  6. The Lexmark printer’s settings will now be changed to the factory defaults.
  7. To reset the non-volatile RAM, turn off the printer.
  8. Now, press the Go, Menu, and Select buttons together. Turn on the printer by holding these three buttons.
  9. When the Restoring Factory Defaults section appears, release the buttons and perform the reset. 

How To Reset PC Kit Lexmark X264dn?

  1. If you have replaced the photoconductor unit on your printer, you have to reset the PC kit. Follow the guidelines given below to reset the PC kit on the Lexmark X264dn setup.
  2. Turn on the Lexmark printer, press the Stop button and hold it until the Resetting PC Counter message appears.
  3. When prompted to close the front door, close it, and complete the reset process.
How To Reset Pc Kit Lexmark X264dn

Lexmark X264dn Setup Troubleshooting Guidance

Run the routine maintenance checks on the Lexmark printer to avoid errors on the printer. If you find the printer not working properly, check the LCD screen for any errors. You can follow the on-screen instructions to resolve the errors. Some of the frequently occurring errors and their troubleshooting techniques are mentioned below. You can reach us by clicking on the Call button on this page. Our technical team will help you in sorting out your printer issues.

Fixed: Lexmark X264dn Error 31.05

The error 31.05 may occur if the cartridge you have installed is faulty. Consider the steps given below to fix the issue.

  1. Open the cartridge door and remove the toner cartridge.
  2. Clean the contacts of the cartridge using a lint-free cloth. Also, clean the printhead.
  3. Open the ink door and wait until the printhead moves to the center portion and clean it.
  4. Try replacing the toner cartridge and check if the issue is resolved. 
  5. If you have connected the Lexmark printer to a Windows computer, go to the Start menu.
  6. Open Control Panel and select Printer and Faxes.
  7. Now, right-click on the Lexmark X264dn setup and select Properties.
  8. Make sure that Reset the cartridges is selected and restart the printer.
  9. The error 31.05 will be fixed once you follow the above-mentioned steps.

Fixed: Lexmark X264dn Error 30.61

Most of the users face this issue when they newly install a toner cartridge. You can follow the guidelines given below to fix the issue.

  1. If you receive the error 30.61, check whether the cartridge has run out of ink.
  2. Make sure to use only genuine ink cartridges to avoid invalid toner cartridge error.
  3. Open the top cover of the printer and check if the Close door or Insert cartridge message is displayed on the printer’s screen.
  4. The open sensor and switch may not work properly if you don’t receive any message.
  5. Now, insert the toner cartridge into the printer and turn off the printer.
  6. With the printer turned off, remove the old toner cartridge from the printer and replace it with a refilled toner cartridge.
  7. Now, turn on the printer and it will read the newly installed cartridge.
  8. The error 30.61 would have been fixed now.

Lexmark X264dn Error 900 Solution

The error 900 is a firmware error that occurs on the Lexmark X264dn setup when there is a bad connection on the network card or adapter. Consider the steps that are given below to fix the issue.

  1. Unplug the power cord from the printer and reconnect it after a few minutes.
  2. Turn on the printer and press the Menu button. Then, select Reports.
  3. Now, go to the Menu Settings Page and print the report.
  4. Locate the information next to the Base under Device information.
  5. If you find the code level below P128, update the firmware of the printer.
  6. Open a browser and go to the official Lexmark website.
  7. Navigate to the Support & Downloads section and choose your printer model number.
  8. Select the Downloads tab and check for the latest firmware.
  9. Click Download and save the .fls file on your computer.
  10. Complete the firmware update process by opening the .fls file to fix the issue.
Fix Lexmark X264dn Error 900

Lexmark X264dn Load Paper Error

Sometimes you may receive the load paper error on the printer screen, even if you have enough paper in it. The error appears when the printer is unable to pick up the paper you have loaded. If you are facing such issues, proceed with the steps that are given below to resolve the issue.

  1. Turn off the Lexmark printer and remove the power cord.
  2. Pull out the paper tray and check whether there are any objects stuck inside the tray.
  3. Make sure that you have loaded paper only below the maximum paper mark.
  4. Now, press the ACM under the tray and pull it down. Then, release it.
  5. You can now fix the paper tray back to the printer to fix the issue.

Lexmark X264dn System Timeout Error 

The system timeout error appears on the LCD screen when the Lexmark printer doesn’t respond. If you receive the error, carry out the steps that are given below to fix the issue.

  1. Let the printer be turned on for at least 10 minutes and check if the issue is resolved.
  2. Now, if the error appears again, turn off the printer and remove the power cord from it.
  3. Remove the toner cartridge and check if it has enough ink. If not, replace the toner cartridge.
  4. Now, turn on the printer after 5 or 10 minutes by connecting the power cord.
  5. If the issue persists, reset the Lexmark X264dn setup to the factory defaults to fix the issue.