Lexmark T654dn Setup

Lexmark T654dn  is a monochrome laser printer that comes with an LCD panel, 250-sheet paper input tray, and supports duplex printing. The print quality and speed are higher than other basic Lexmark printers.

Quick steps for Lexmark T654dn setup are given below:

  1. Unpack the Lexmark T654dn printer first.
  2. Take out the printer supplies from the package and keep them away for future use.
  3. Remove the protective tapes from the printer.
  4. Open the front door of the Lexmark printer and pull out the print cartridge.
  5. Remove the packing materials from the cartridge and shake it well to distribute the toner inside the unit evenly.
  6. Install the print cartridge into the printer and close the front door.
  7. Attach the paper bail at the top of the printer.
  8. Pull the paper input tray out and load some plain paper along the paper guide-width.
  9. Push the paper tray back into the printer.
  10. Now, connect the power cord’s one endto an electrical outlet. Plug the other end into the printer's power port and power up the printer.
  11. Install the printer software on your computer with the help of the setup CD that camewith the printer.
  12. After installing the printer driver, verify the printer functionby printing a test page.
Lexmark T654dn Setup

Lexmark T654dn Driver Download

You can download the Lexmark T654dn printer driver by merely clicking the Driver Download  button available on this page. If you wish to download it from the official Lexmark site, follow the below-mentioned steps.

  1. On the Lexmark official site, enter your printer's model number in the search panel and select your printer name from the search result.
  2. Click the Go button and go to the Downloads 
  3. Select the OS running on your computer from the Operating System drop-down menu.
  4. Click the recommended driver link from the displayed list.
  5. On the next screen, click the I agree-download  button to download the Lexmark printer driver.
  6. After downloading the printer driver, proceed with the installation.
Driver for Lexmark T654dn Printer

Lexmark T654dn Manual Download

You can download the Lexmark T654dn setup's manual by clicking the Manual Download  button available on this site. Otherwise, get the manual from the manufacturer’s site by following the steps given below.

  1. On your computer, open the default browser and navigate to the official Lexmark site.
  2. Enter your printer's model number in the search panel and select your printer name from the search result.
  3. On the next screen, click the Manuals tab and select your desired manual from the displayed list.
  4. The Lexmark printer's user manual will open in a new tab in the browser.
  5. The Lexmark printer's manual will be available for download as a PDF 
  6. Click the Download  icon available at the top of the screen to start downloading the printer's manual.
User Manual for Lexmark T654dn Setup

Install Lexmark T654dn Driver

Carry out these steps to install the Lexmark T654dn printer's driver on your Windows computer:

  1. Before installing the printer driver, check whether you have completed the basic printer settings.
  2. Remove any previously installed Lexmark printer drivers on your computer to avoid the installation fails during the driver setup.
  3. Do not connect the printer to the computer before installing the printer driver.
  4. Make sure that the printer is powered on.
  5. Insert the software CD into the CD/DVD drive of your Windows computer.
  6. Open the setup file from the File Explorer and run the driver installation.
  7. Alternatively, you can download the printer driver from the official Lexmark site and run the downloaded installer fileto complete the installation.
  8. Agree to the EULA and select your connection type.
  9. Finish the driver installation process with the help of the on-screen prompts.

Lexmark T654dn WiFi Setup

  1. Before setting up your Lexmark T654dn setup to the wireless network, identify the SSID, Network mode, security key, and Security method of your Wi-Fi router.
  2. Turn on the Lexmark printer, Windows computer, and Wi-Fi router.
  3. Connect your Windows computer wirelessly to the Wi-Fi router with the help of the wireless network credentials.
  4. Insert the Lexmark printer's software CD into the CD drive and open the setup file to run the driver installation.
  5. Otherwise, open the downloaded printer driver from theDownloads
  6. Click the Install button and click Agree  after reading the End User License Agreement .
  7. Click the Suggested  button and select Wireless Network Attach .
  8. Get a standard USB cable to connect the printer and the Windows computer temporarily.
  9. When the printer is detected successfully, disconnect the USB
  10. Finish the driver installation with the help of the on-screen prompts and then print wirelessly from the computer to the printer to verify the connectionsetup.

Lexmark T654dn Toner Replacement

Carry out these steps to replace the Lexmark T654dn setup's toner cartridge:

  1. First, open the printer's front door and take out the used print cartridge from the Lexmark T654dn printer without damaging the internal parts.
  2. Unpack the new toner cartridge and shake it gently to distribute the ink inside the cartridge evenly.
  3. Install the print cartridge into the printer and close the printer's front door.
  4. Now, the toner cartridge is replaced successfully in the Lexmark T654dn printer.
  5. Make sure to recycle the used toner cartridge.

Update Lexmark T654dn Firmware

The firmware update is not available for the Lexmark T654 printer yet. If you wish to get the firmware update, go to the official Lexmark site and navigate to the Support and Downloads  page for your product. Click the Sign up now for firmware alerts  link. When the latest firmware is launched, you will be notified.

Lexmark T654dn Print from Flash Drive

If you want to print a document from a flash drive, follow these steps.

  1. Turn on your Lexmark T654dn setup first.
  2. Ensure that you have completed the basic printer settings.
  3. Load a few plain paper into the paper input tray.
  4. Set your printing preferences.
  5. Insert the flash drive into the printer's front USB
  6. Press the Down arrow key until the tick mark appears next to your document saved in the flash drive.
  7. Press the Select button and enter the number of copies you wish to print with the keypad's help.
  8. Next, press the Select button to start printing the selected document.

Lexmark T654dn Duplex Printing Guide

  1. On your Windows computer, open the Control Panel app and click on Devices and Printers .
  2. Under Devices , give a right-click on the Lexmark printer's icon and select Properties .
  3. In the Properties  window, click the Device tab and select the Duplex  option in the Available Options
  4. Click theAdd  button and check if it has been moved to the Installed 
  5. Click Apply and then OK .
  1. Next, give a right-click on the Lexmark printer's icon and select the Printing Preferences
  2. Click the Setup  tab and navigate to theDuplex
  3. Enable theDuplex  radio button and click OK .
  4. Open the document or envelope you wish to print from your Windows computer and press the CtrlP  shortcut keys to open the Print  dialog box.
  5. Enable the 2-sided printing option and then click the Print  or OK
  6. Ensure that you have installed the duplex unit in the Lexmark T654dn printer and loaded some plain paper into the paper input tray.

Lexmark T654dn Setup Troubleshooting Guidance

Is your Lexmark T654dn printer malfunctioning and causing trouble? Then you have to use the correct troubleshooting method to fix the issue and use your printer as before. Most printer issues occur due to incomplete installation and improper maintenance of the printer, and so, have a regular check on your printer.You can refer to the quick steps given on our site for fixing some of the common printer issues. If you have difficulties in troubleshooting the printer problems, contact our technical support team by clicking the Call  button available on this screen for remote assistance.

Guide: Lexmark T654dn Paper Jam

You see the 'Paper Jam' error on the Lexmark T654dn printer's LCD panel when paper bits get jammed into certain locations inside the printer.

To remove the Paper Jam  error in the Lexmark T654dn printer, visually check for the jammed paper in the below-mentioned areas.

  1. Envelope feeder, Multipurpose feeder, Optional output bins, Paper trays, Staple cartridge and Optional external duplex unit
  2. If you detect paper bits or jammed paper inside the printer, remove themcarefully.
  3. To avoid the Paper Jam  error in the future, fan the paper well and align them in a neat stack before loading them into the input tray.

Fixed: Lexmark T654dn won't Print Black

  1. If your Lexmark T654dn setup is not printing black ink, check the toner level first.
  2. Next, go to the printer's control panel and verify the Toner Darkness
  3. Navigate to the Quality menu and select the Toner Darkness  Set the default toner darkness setting (8).
  4. If necessary, select higher toner darkness in the printer driver.
  5. Try printing a test page from the connected computer and check if the problem has been resolved.
  6. If the problem persists, pull out the print cartridge from the printer and shake it well to distribute the toner evenly inside the cartridge.
  7. Refix the print cartridge and close the printer's front door.This will fix the printing problems on your Lexmark printer.

Solved: Lexmark T654dn won't connect to Wifi

Carry out these steps to troubleshoot the wireless network issues on your Lexmark T654dn printer:

  1. First, restart your printer and the Wi-Fi router.
  2. Print aNetwork Settings  page from the Lexmark T654dn setup and check the Wi-Fi connection status.
  3. Check whether you have appropriately connected the Ethernet cable between the printer's Ethernet port and the Wi-Fi router.
  4. On your computer, check the network ports and printer drivers.
  5. Disable the firewall installed on your computer and run the network communication diagnosis.
  6. If the problem persists, reset the network configuration settings to thedefault factory settings and reconfigure them using the correct wireless network credentials.

Guide: Lexmark T654dn Factory Reset

Performing a factory reset on the Lexmark T654dn  printer will reset the configured settings to factory defaults.A factory reset is recommended only when all the other troubleshooting methods fail. If you still wish to reset your Lexmark T654dn printer, follow the below-mentioned steps.

  1. Turn on your Lexmark printer and navigate to the printer's control panel.
  2. Select the Settings option followed by General Settings .
  3. Use the arrow keys to select the Factory Defaults option and press Select .
  4. Select the Restore Now option and wait until the printer the 'Restoring Factory Defaults' message is displayed on the screen.
Lexmark T654dn Setup Reset

Lexmark T654dn not Printing Solution

If your Lexmark T654dn printer is not responding tothe print commands, it might be due low toner level or a connection error. It can be resolved with the help of the below-mentioned troubleshooting steps.

  1. Make sure that you have installed the compatible printer software on your computer.
  2. Print a network setup page and verify the printer's connection if you have connected the Lexmark T654dn printer wirelessly to the computer.
  3. Make sure to use only the standard Ethernet or USB cable for the connection between the printer and the computer.
  4. On your Windows computer, go to the Control Panel window and select Devices & Printers .
  5. Under Devices , give a right-click on the Lexmark printer's icon and select theSet as Default Printer 
  6. Once again, give a right-click on the printer's icon and select the Status
  7. If your Lexmark T654dn setup's status is offline, give a right-click on the Lexmark printer's icon and select Use Printer Online
  8. Close the Control Panel  app and click the Start
  9. Type' services.msc' in the search panel and press the Enter key to open the Services
  10. Otherwise, open the Control Panel app and click on Administrative Tools .
  11. Select Services  and click the Print Spooler
  12. Give a right-click on the Print Spooler  service and select the Stop the service 
  13. After a few minutes, click on Start the service .
  14. Try printing a test document and check if the problem has been resolved.