Lexmark T650n Setup

Lexmark T650N is a monochrome laser printer that yields high-quality print with the print speed of 45 ppm and is a perfect choice for office and home use. Set up the printer using the below-mentioned steps, and then get on with printing.

Lexmark T650n Setup

Step-1: Unpack the printer

  1. Unbox the printer and place it on a stable surface.
  2. In the box, check for the printer accessories such as the power cord, user manual, toner cartridge, and installation CD and keep them safe.
  3. Remove all the packaging tapes and protective covers from the printer.
  4. Now, press the release tab on the left side and lower the multipurpose feeder door.
  5. Again, press the release tab and lift the front door.
  6. Remove all the protective materials from the inside of the printer.
  7. Take out the print cartridge, separate the protective covers, and gently shake it.
  8. Now, reinstall the cartridge inside the printer carefully.
  9. Close the front panel and then the multipurpose feeder door.

Step-2: Load paper in the standard tray

  1. Draw out the tray from the printer and move the green paper guides to the edges of the tray.
  2. Neatly arrange the paper stack such that the print face is down for single-sided printing and up for double-sided printing.
  3. Place the paper in the tray, shift the paper guides to the edges of the paper stack, and make sure it is not so tight.
  4. Now, slowly insert the tray back into the printer.
  5. Turn on the printer and set the paper settings using the printer’s control panel.
  6. Take the paper support wire and attach it above the stand exit bin to hold the output paper.

Step-3: Power connection

  1. Use the power cord provided with the printer to connect it to the printer's supply port.
  2. Plug the other end to an electrical wall outlet and press the power button on the control panel.
  3. When the printer’s display panel turns on, configure the basic settings, and save it.

Step-4: Software installation

  1. After completing the printer hardware setup, go on to install the printer software on the computer.
  2. The software helps to manage and control printer operations from the computer.

Lexmark T650n Driver Free Download

Driver for Printer

The printer driver is provided to you on the installation CD, but you can also get it online. The steps will help you to download the printer driver.

  1. Connect your computer to the internet and open a web browser.
  2. Go to the official Lexmark website, search for your printer model, and select it.
  3. When the printer’s support page shows up, click Go to drivers and downloads below Features, at the right end.
  4. On the next page, click the Downloads tab and then choose the Operating System from the drop-down menu.
  5. From the list of drivers, click the driver link you have to download and save it on your computer.

Lexmark T650n Manual Download

User Manual

Like the printer drivers, the user manuals are also available online for download. Follow the below-mentioned steps to download the manuals.

  1. Visit the official Lexmark support site using a browser window.
  2. Scroll down the support page of the printer, locate the Product Support section, and click the User Guide link.
  3. Under the Manuals panel, you can find the different user manuals of the printer below Manuals & Guides.
  4. The manuals are available both in the PDF and HTML formats. Click the download link to get it on your computer.

Lexmark T650n Driver Installation

  1. Get the printer driver on the computer either by downloading from the manufacturer's website or from the installation CD.
  2. If you download the driver, then open the installer file to start the installation.
  3. Otherwise, insert the CD in the computer, open the CD/DVD directory and run the software installer file.
  1. When the printer setup wizard window opens up, read the license agreement and accept it.
  2. Choose the connection method and follow the procedure as instructed on the setup wizard to complete the driver installation.

Lexmark T650n Troubleshooting

Whenever the printer encounters a problem, an error message would appear on the display panel. Read the message and try to resolve it using the guidelines provided in the user manual. If the printer is connected to a network, you can access the Embedded Web Server of the printer. The below steps would help you to access the EWS.

  1. Connect your computer to the same router network as the printer.
  2. Open a web browser, input the printer's IP address in the address bar, and press the Enter key.
  3. Once the printer’s webpage appears, you can view the printer status, network settings, virtual control panel, and other printer settings.

You can contact our technical support team for assistance to fix the printer issues.

Lexmark T650n Troubleshooting

Lexmark T650n Offline

If the Lexmark printer goes offline even after turning on, check if the ports are online. Use the below steps on your Windows computer to solve the issue.

  1. Make sure the computer and the printer are on the same network.
  2. Open the Devices and Printers window on the desktop using the search box.
  3. Under network printers, find your printer’s name, right-click it, and select Properties.
  4. Go to the Ports panel, click Configure Port, and then untick the checkbox of SNMP Status Enable.
  5. Save the settings and close the window.
  6. After that, restart the computer and verify if the printer is online.

Lexmark T650n Paper Jam 241.10

The printer error codes from 241 to 245 indicate that there is a paper jam in the printer. Read the following steps to clear the paper jam.

  1. Draw the paper tray out of the printer and see if any paper is damaged or crippled. If found, then remove the paper.
  2. Check the inside of the printer and remove the jammed paper.
  3. Now, insert the tray into the printer and press the 'Tick' icon on the display panel.

Lexmark T650n Factory Reset

Resetting the printer reverts all the printer settings to the default factory settings and erases all the printer memory. Perform the factory reset only if necessary and make use of the below steps.

  1. On the printer’s display panel, select the Settings menu and choose General settings.
  2. From the list of options, select Factory Defaults and confirm the reset action.

Lexmark T650n Service Printhead Error       

If the Printhead faces any issue, the printer denotes it through a range of error codes from 930 to 935. Each number indicates a printhead problem. 

  1. Disconnect the printer’s power cord and wait for some time.
  2. Again, connect the power cord, turn on the printer, and check if the error has been withdrawn.
  3. If the error persists, then troubleshoot the error for the particular error code.

Lexmark T650n 935.24 Service Printhead Error

The Printhead has a mirror motor and an exhaust fan. If the motor couldn’t reach the operating speed or the exhaust cannot run, or if it is stuck, the printhead error 935.24 is displayed on the printer. Fix the problem using the below steps.

  1. Turn off the printer and open the top cover.
  2. Look inside the printer along the left side and you can find a wheel-like metal structure.
  3. If the fan is stuck, spin it a few times using a long scale or pen.
  4. If the wheel spins freely, then it is fine. If not, then contact the service team to check service your printer hardware.

Lexmark T650n 931.01 Service Printhead Error

If the Printhead does not receive the proper laser Hsync signal, then the printhead error 931.01 occurs on the printer.

  1. Sometimes, the Hsync signal misses hitting the Printhead, which could be due to incorrect voltage of the power supply.
  2. Check if the power cable is connected properly to the electrical socket.
  3. Verify if the power supply is stable.
  4. Replace the damaged or tampered power cord with a new one.

Copyright © 2021 - 2022 printer-setup.us | All Rights Reserved.

printer setup support
➤