Navigate to the router’s web-based setup page on your computer, enable WPS and enter the WPS PIN.
Continue with the display panel instructions.
This will connect the Lexmark Pro715 printer to Wi-Fi.
Lexmark Pro715 PrintHead Replacement
Open the Lexmark Pro715 printer cover.
Release the latch and then take out the printhead from the printer.
Unpack the new printhead.
Insert the new printhead and then close the latch.
If the printhead is placed correctly, you will hear a lock sound.
Close the printer cover properly.
Lexmark Pro715 Toner Replacement
The Lexmark Pro715 setup does not contain toner. Instead, this printer has ink cartridges.Below are the steps to replace the ink cartridges.
Make sure the printer is turned on.
Raise the top cover, release the latch, and take all the used ink cartridges from the printer.
Unpack the new ink cartridges.
Remove the protective cap and then install all the ink cartridges one after the other in the cartridge slots correctly.
Close the printer’s top cover.
Lexmark Pro715 Scan Setup
It is mandatory to download and install the scanner driver on your computer to perform the scan function on the Lexmark Pro715 setup. Make sure to install the latest version of the driver compatible with your computer’s OS.
Lexmark Pro715 Scanner Software Download
Access the official Lexmark site from your computer’s default web browser.
Type Lexmark Pro715 in the search bar.
Go to your printer’s support page and navigate to the Downloads tab followed by the Drivers section.
Click the Network Scan driver for multifunction devices link followed by the I agree - download button.
The scanner software will be downloaded and saved in the computer’s Downloads folder.
Lexmark Pro715 Scan To Computer
If you are about to scan a multiple-page document, it is better to use the Automatic Document Feeder (ADF) to place the original document.
To scan single pages and other small items such as postcards or photos, place the document on the scanner glass.
While placing the document in ADF, the printed side must face up. In the case of the scanner glass, the printed side should face down.
After loading the original document, go to the printer’s home screen, select the Scan option, and press OK.
Select the Computer option followed by the USB-Connected Computer option and then press the OK button.
Use the navigation buttons to mention the color, quality, original image size, and other scan options as per your requirement.
Once you press the Start button on the control panel, the Lexmark Pro715 setup scans the document according to the mentioned scan settings.
The printer then sends the scanned document to the connected computer.
Lexmark Pro715 Duplex Printing Guide
Supported media type for duplex printing are A4, letter-size, plain, premium plain, ColorLok certified plain, heavy plain, and letterhead paper types
Load the supported paper into the Lexmark Pro715 printer’s paper tray.
Open the document, go to the File tab, and choose the Print option.
Select the Properties, Preferences, Options, or Setup option. Note: This option varies depending on your software.
Navigate to Print on Both Sides (Duplex) -> Print on both sides and select either the Long Edge or Short Edge option.
Paper/Finishing tab: Specify a paper type.
Click OK -> OK or Print.
The Lexmark Pro715 printer will print the document now.
Lexmark Pro715 Firmware Update
You can download and update the firmware of the Lexmark Pro715 printer.
Visit the official Lexmark website and search for the printer.
On the printer’s support page, click the Drivers & Downloads link in the left pane, click the Firmware tab, and click the firmware to download it.
After downloading the firmware file, double-click it to begin the installation process.
Carry out the on-screen prompts.
This will update the Lexmark Pro715 printer’s firmware to the most recent version.
Lexmark Pro715 Setup Troubleshooting Guide
Some of the commonly occurring problems on the Lexmark Pro715 printer are cannot print black, cannot connect to Wi-Fi, cannot print, and printhead not supported. The troubleshooting instructions to resolve these problems are given below. If you need technical assistance from our support members in resolving the Lexmark Pro715 printer problems, click the Call button available on this page.
Fixed: Lexmark Pro715 won't Print Black
This problem arises when the ink in the black ink cartridge is low. In this case, you have to replace the black ink cartridge with a new one.
Replace the black ink cartridge:
Lift the printer cover, press the release tab, and remove the used black ink cartridge.
Get a genuine black ink cartridge for the replacement.
Unpack the black ink cartridge and remove the cap.
Place the black ink cartridge in the slot correctly and close the Lexmark Pro715 setup cover.
Clean the printhead:
Select the Setup option on the home screen of the printer.
Select Maintenance -> Clean Printhead or Deep Clean Printhead and press the OK butto
Solve: Lexmark Pro715 won't Connect to Wifi
Turn off both your wireless router and modem.
Disconnect the power cord from them.
After 30 seconds, reconnect the power cord and turn on both the router and the modem.
Provide the correct wireless network information to establish a connection between the printer and the router.
Check if the problem has been resolved. If not, reset the router.
Lexmark Pro715 not Printing Guide
If you cannot print on the Lexmark Pro715 setup through USB, carry out the troubleshooting steps mentioned below.
The printer cannot print if it is connected to your computer using a damaged USB cable.
So, try to replace it with a new one.
Make sure the connection between the printer and the computer is firm.
Try to use another USB port for the connection.
The USB port must be enabled on the computer.
If you are using a Windows computer, open the Device Manager window and click the Universal Serial Bus Controllers option.
Check if both USB Host Controller and USB Root Hub are listed.
This indicates that the USB port is enabled.
If the ‘cannot printing’ problem persists, uninstall the Lexmark printer software and install it again on the computer.
Lexmark Pro715 Factory Reset Guide
On the home screen of the Lexmark Pro715 printer, select Setup -> Restore Factory Defaults and press the OK button.
Select the Restore All Printer Settings option and press the OK button.
Select the Yes option using the left or right arrow button and press OK on the control panel.
Now, the Lexmark Pro715 printer restarts automatically.
After the restart, all the settings would be reset back to default.
The control panel will prompt to set the initial settings.
Specify them correctly using the control panel buttons.
Once done, you will see the Initial Setup Complete message on the printer’s display panel.
Fix: Lexmark Pro715 PrintHead not Supported
Lift-open the Lexmark Pro715 printer’s top cover.
Open the latch and remove the printhead.
Use a clean and lint-free cloth to wipe the printhead contacts as well as the carrier inside it.
Install the same printhead and close the latch.
Check if the printhead is inserted correctly.
Close the printer’s top cover properly.
Check if the printhead not supported problem has been resolved.