Lexmark Pinnacle Pro901 Setup

Lexmark Pinnacle Pro 901 printer is an All-in-One thermal inkjet printer. You can perform the print, copy, or fax operation over wireless, direct USB, and Ethernet network connection, and also using PictBridge Certified USB port.

The printer accessories include 4 genuine ink cartridges (black, cyan, magenta, and yellow), quick setup sheet, quick references CD, fax guide, network guide, installation CD, and RJ-11 phone cable. To set up this Lexmark printer for the first time, follow the instructions given below.

  1. Unpack the Lexmark printer package.
  2. Remove all the packing materials present and outside of your Lexmark printer.
  3. Then, open the top cover of your Lexmark printer.
  4. Unpack the ink cartridges.
  5. Place the cartridges into the respective slots.
  6. After that, fill the paper tray with enough plain paper.
  7. Now, connect the Lexmark printer to the electrical outlet and turn it ON.
  8. Set the basic print preferences.
  9. Then, connect your Lexmark printer to wired, wireless, or direct USB cable connection.
  10. Begin the printer driver installation on your Windows or Mac computer using a setup CD or downloaded driver file.
Lexmark Pinnacle Pro901 Setup
  1. Finish the software installation process by following the instructions displayed on the screen.
  2. Finally, try a test print.

Lexmark Pinnacle Pro901 Driver Download

Driver for Epson ET-3750 Printer
  1. Locate and click the Driver Download button provided below.
  2. Based on your current OS type, the available print driver files will download.
  3. You can also download the driver from the manufacturer’s site.
  4. On the official Lexmark support page, find the driver for your printer and download it.

Lexmark Pinnacle Pro901 Manual Download

User Manual
  1. Click the Manual Download button provided above.
  2. A soft copy of the Lexmark Pinnacle Pro901 printer’s user guide file will download in the PDF format.

Lexmark Pinnacle Pro901 Driver Installation

You can perform the Lexmark Pinnacle Pro901 printer driver installation on your Windows or Mac computer using the setup CD or downloaded driver file.

  1. If you have the setup CD, insert it into your computer’s CD tray and load the CD.
  2. If you have downloaded the Lexmark Pinnacle Pro901 printer driver, just double-click the file to open it.
  3. Accept the terms and conditions of the Lexmark printer.
  1. If prompted, enter your computer’s security key.
  2. Make sure to select the correct connection type when prompted.
  3. Follow the instructions displayed on the screen and complete the Lexmark Pinnacle Pro901 printer driver installation on your computer.
  4. Finally, try a test print on your Lexmark printer.

Lexmark Pinnacle Pro901 Wifi Setup

Using WPS (Push)

  1. Turn on your wireless router and the Lexmark Pinnacle Pro901 printer.
  2. Tap the Setup icon.
  3. Select Network Setup > Wireless Networking > Wi-Fi Protected Setup > Push.
  4. Now, locate and press the WPS button on your wireless router’s control panel.
  5. Once your Lexmark printer is connected to the wireless network, the Wi-Fi light will start blinking green.
  6. Now, perform the software installation on your Windows or Mac computer to complete the Wi-Fi setup.

Lexmark Pinnacle Pro901 Printhead Replacement

  1. Get a new printhead from a trusted online retail store.
  2. Now, open the top cover of your Lexmark printer.
  3. Take the ink cartridges out of the printhead.
  4. Then, slowly, take the printhead out of your printer.
  5. Unpack the new printhead and place it into the Lexmark printer.
  6. Insert the ink cartridges correctly into the respective slots on the printhead.
  7. Close the top cover of your Lexmark printer.
  8. Now, you have successfully replaced your printer’s printhead.

Lexmark Pinnacle Pro901 Troubleshooting

We have given some of the common Lexmark Pinnacle Pro901 printer issues and the respective troubleshooting instructions. Refer to these solutions to quickly fix the issues. For assistance in fixing any printer issues, contact our technical experts, we are available 24/7.

Lexmark Pinnacle Pro901 Offline

If Lexmark Pinnacle Pro901 printer status shows offline, try the quick troubleshooting steps mentioned below.

  1. First, make sure that your Lexmark Pinnacle Pro901 printer is turned ON. If not, turn it ON, and then check if the error Printer Offline is resolved.
  2. Go to the Printers folder on your Windows computer. Locate and right-click on your Lexmark printer.
  3. Select the Properties option followed by Use Printer Offline.
  4. Now, check if the error printer offline is resolved.
  5. If not, check if the Lexmark printer and your computer are connected to the same network connection.
  6. Check if you have installed the correct Lexmark printer driver on your Windows or Mac computer.
  7. Update the driver to the latest version.
  8. Restart your computer and the Lexmark printer.
  9. Now, check if the error Lexmark Pinnacle Pro901 has been resolved.

Lexmark Pinnacle Pro901 Paper Jam

  1. To clear the paper jam error on your Lexmark Pinnacle Pro901 printer, follow the instructions given below.
  2. First, identify the location where the paper jam has occurred.
  3. Open the printer’s top cover. Look inside the cartridge area and clear the jammed paper if found.
  4. After that, try to remove the jammed paper bits from the trays.
  5. Now, run a test print to check if the issue has been resolved.
     

Lexmark Pinnacle Pro901 Printhead Cleaning

  1. You may receive poor print quality prints when the printhead nozzles of your printer are surrounded by dirty particles. You must clean the printhead nozzles of your printer to fix these issues.
  2. You can perform printhead cleaning from the printer’s control panel or using the printer software.

Using the printer’s control panel

  1. Tap the ink icon.
  2. Select More Options > Clean Printhead or Deep Clean Printhead.
  3. Now, the printhead cleaning process begins on your Lexmark printer.

Using print software

On your Windows computer:

  1. Open the Printer folder. Select the Printer Home option followed by your Lexmark printer.
  2. Now, click Maintenance > Clean Cartridges. Finish the printhead cleaning process by following the instructions displayed on the screen.

On your Mac computer:

  1. Click the Finder icon. Select printer program folder > Printer Utility > Maintenance > Clean Print Nozzles.

Lexmark Pinnacle Pro901 Printing Blank Pages

You may receive blank outputs form the printer due to several factors. These factors and the fixes are given below:

  1. First, check the printhead’s condition. Open the cover of your printer.
  2. Check your printer’s printhead location.
  3. If it is at the center, there is a problem in the printhead, contact your dealer or manufacturer to fix it.
  4. If the printhead is at left, set your Lexmark printer to the Replace Printhead mode.
  5. To do it, tap the Ink Levels icon on your printer’s touch screen.
  6. Select the More Options option followed by Replace Printhead.
  7. Now, open the cover of your Lexmark printer.
  8. Near the cartridges, you can find the WICKING PAD.
  9. If it is black, then it means the ink has successfully passed into the printhead.
  10. If the pad is black, there is an ink flow problem.
  11. To fix it, reseat the printhead of your Lexmark printer.
  12. If the Lexmark Pinnacle Pro901 printer printing blank pages issue persists, then proceed to check the ink cartridges.
  13. Replace the ink cartridges if they are out of ink and then try a test print.

Lexmark Pinnacle Pro901 Not Printing Black

  1. If your Lexmark Pinnacle Pro901 printer is not printing in black, then try some of the instructions to fix it.
  2. First of all, make sure that the black ink cartridge contains enough ink to perform the print operation.
  3. If it is very low on ink, replace the black cartridge and then try to perform the black print operation.
  4. If the printer still doesn’t print in black, check if there is an update available for your Lexmark printer.
  5. If so, update the latest printer firmware on your computer.
  6. Then, perform the black print operation.
  7. If this issue persists, clean your Lexmark printer’s printhead.
  8. Make sure the print settings are correct.