Lexmark MS510dn is a monochrome laser printer that comes with an LCD panel and a pre-installed toner cartridge. The Basic Lexmark MS510dn setup process is quite simple, using the steps mentioned below.
Unpack the printer and take out the printer supplies from the package.
Remove the packing materials from the printer.
Pull out the toner cartridge assembly entirely from the printer.
Shake the toner cartridge to distribute the ink evenly.
Next, pull out the paper input tray from the printer and load plain paper.
Fan the paper before loading them into the tray.
Adjust them with guideways and refix the paper input tray into the printer.
Connect the Lexmark printer to the wall outlet using the supplied power cord and power up the printer.
Configure the basic printer settings and install the printer software on your computer using the supplied setup CD.
After installing the printer driver, verify the print function.
Lexmark MS510dn Driver Download Windows 10
Carry out these steps to download the Lexmark printer driver on your Windows 10 desktop:
On your PC, open the default browser and go to the official Lexmark site.
Enter your printer model in the search panel and choose your printer from the search result.
Next, click the Go button to open the Software & Downloads page.
Click the Downloads tab and choose Windows from the Operating System drop-down menu.
Next, select the Windows 10 version from the Please Select Version pull-down menu.
Under Recommended Driver, click the Lexmark MS510 Series Driver and Software option.
On the next page, click the I agree – download button to start downloading the printer driver.
Lexmark MS510dn Manual Download
The Lexmark MS510dn setup manual is supplied along with the printer during the first-time purchase. If it was lost accidentally, it could be downloaded by clicking the Manual Download button available on this screen. Otherwise, download it from the official Lexmark site using the below-mentioned steps.
On the official Lexmark site, enter your printer model in the search panel and click the Go button.
Next, click the Manuals tab and choose your desired manual under the User's Guides section.
The manuals are available for download as PDF files.
Make sure that you have installed the PDF reader on your PC to access the downloading manuals.
In the PDF reader window, click the Download icon available at the top of the screen to start downloading the manual.
Lexmark MS510dn Driver Installation
Carry out these steps to install the Lexmark MS510dn printer driver:
Turn on your printer and the computer first.
Verify whether you have completed the basic printer settings.
Insert the setup CD that comes with the printer into the CD/DVD drive of the computer.
Go to the CD drive and give a double-click on the setup file to run the driver installation.
If you have downloaded the printer driver, go to the Downloads folder and give a double-click on the installer file to run the driver setup.
On the setup wizard screen, agree to the EULA and click the Install button.
Choose wireless, wired, or local USB connection as your connection type.
Next, finish the driver installation process by following the on-screen prompts.
After the installation, verify the print function by printing a test page remotely from the computer to the Lexmark printer.
Lexmark MS510dn Wireless Setup
Before setting up the Lexmark printer to the wireless network, identify the network credentials of the Wi-Fi router.
Turn on the Lexmark MS510dn setup, Wi-Fi router, and computer.
Connect your computer to the wireless network.
Next, connect the printer to the wireless network using the Wi-Fi Protected Setup method.
Once you have connected the Lexmark printer to the wireless network, install the printer driver on your computer.
Use the setup CD-ROM or downloaded printer driver to run the driver installation.
On the "Select the Connection Type" screen, choose the Wireless connection option.
Finish the driver installation process by following the on-screen prompts.
Lexmark MS510dn Toner Reset
Turn on your Lexmark printer and press the Menu button until the printer displays the Reset Toner Lvl option.
Next, hit the OK button and select the Reset option from the printer's control panel.
When the printer starts resetting the toner, it will display the Resetting Toner message.
Once you reset the toner, restart your printer.
Lexmark MS510dn Drum Reset
Make sure that the Lexmark MS510dn setup is powered on.
Press the Cancel button and hold it while opening the printer's front cover.
Release the Cancel button when the printer displays the Resetting PC Counter message.
Next, close the printer's front cover and verify whether the reset was successful by printing a Printer Menu Settings page.
Lexmark MS510dn Imaging Unit Cleaning
Follow these steps to clean the imaging unit of the Lexmark MS510dn printer:
First, power off the printer and rest the printer to cool down.
Open the front cover of the printer and lower the door.
Pull out the toner cartridge assembly from the printer and place the print cartridge assembly on a flat and clean surface.
Use a clean and lint-free cloth to wipe the printhead lens area.
Clean the printer without damaging the internal parts.
Install the toner cartridge assembly into the printer and close the front cover.
Print a sample document to verify the print quality.
If the print quality is poor, replace the imaging unit or toner cartridge.
Lexmark MS510dn Tray Setup
After unpacking the Lexmark MS510dn setup, remove the protective tapes and pull out the paper input tray.
Press down the blue lever to release the paper guides.
Make sure the tray has no protective tapes and covers left.
Fan the plain paper before loading them into the paper input tray.
After loading the paper, adjust the paper guides firmly. Avoid crumpling the paper while adjusting the guides because it may lead to paper jam error.
Next, fix the paper input tray into the printer.
Lexmark MS510dn Firmware Update
Before updating the firmware, disconnect the option cards from the printer.
Connect the Lexmark printer to the computer using a standard USB cable.
Otherwise, connect the printer and computer over a wireless network.
Next, connect the computer to the same wireless network and open the default browser.
Go to the official Lexmark site and enter your printer model in the search field.
Choose your printer model and go to the software & downloads page.
Click the Downloads tab and select the latest firmware under the Recommended Firmware section.
On the next page, click the I agree – download button to start downloading the printer's firmware.
Save the downloaded firmware in the system folder and extract it from the zip folder.
Next, open the new tab on the browser and enter the printer's IP address in the URL field.
Press the Enter key to open the embedded web server.
Click the Settings button from the left-side panel and select the Update Firmware option on the right side of the window.
Click the Choose File option and open the downloaded firmware from the system folder.
After opening the firmware file, click the Submit button and wait until the firmware update is complete.
Once it is complete, restart your printer.
Lexmark MS510dn Setup Troubleshooting
If your Lexmark MS510dn printer malfunctions, you need to troubleshoot the printer problems. Some of the common printer errors are due to incomplete installation and improper maintenance of the printer. The paper jam error, the printer is offline, ink error, wireless connection issues, and scan errors can be fixed using the specified troubleshooting steps. If you have difficulties in troubleshooting the printer problems, contact our technical support team.
Solved: Lexmark MS510dn Paper Jam Error
Paper Jam is a common printer error that occurs specifically in certain areas inside the printer. You need to inspect the jammed area first, find the jammed paper bits, and remove it firmly without damaging the internal parts of the printer. Next, restart your printer and check if the error is resolved by printing a test page.
Check these locations for jammed paper:
Printer's front door
Printer's rear door
Printer's tray 1 (duplex)
Behind the tray
Lexmark MS510dn Factory Reset Guidance
Turn on your Lexmark MS510dn setup and go to the printer's control panel.
Press the Home button and select Settings the option twice from the control panel.
Press the OK button and select General Settings.
Hit OK and select Factory Defaults.
Press the OK button and select the Restore Now option.
Wait until the process is complete.
Once your printer restarts, configure the necessary printer settings using the control panel.
Lexmark MS510dn Printer Offline Solution
Are you getting the "Printer is Offline" message on your PC when even when the computer is connected to the Lexmark MS510dn printer? If so, follow the below-mentioned troubleshooting steps to bring it back to online.
Check whether your Lexmark MS510dn printer is in sleep mode or plugged out from the electrical outlet.
If it is turned off, then connect the proper cable and power up the printer.
If it is in sleep mode, press the Home button to wake it.
Go to the Windows Control Panel and click the Devices and Printers tab.
Under Devices, give a right-click on the printer icon and select the Use Printer Offline option.
Remove all the print jobs from the print queue.
Restart your Lexmark MS510dn setup and the computer.
Next, assign a new print job and check if the offline printer issue is resolved.
If the problem persists, remove and reinstall the printer driver installed on your PC.