Lexmark MS415dn Setup

Lexmark MS415DN is a monochrome laser printer that supports duplex (2-sided) printing. This printer prints up to a maximum speed of 40 ppm. Here are the quick instructions to perform the Lexmark MS415dn setup.

  1. Make sure the following accessories are included in the box.
  2. Software and documentation CD
  3. Statement of limited warranty
  4. Stability sheet and safety sheet
  5. Setup guide
  6. Power cord
  7. Toner cartridge
  8. Imaging unit
  9. Take all the protective materials and tapes from the outside and the inside of the printer.
  10. Lower the printer’s front cover, place the imaging unit followed by the toner cartridge, and close the front cover.
  11. Use the power cord to establish a connection between the printer and the electrical outlet.
  12. Power up the printer by holding the Power button.
  13. Draw out the paper tray from the printer.
  14. Move both the length and width guides in the outward direction.
Lexmark Ms415dn Setup
  1. Fan a stack of plain paper and place them in the paper tray.
  2. Align the length and width guides according to the paper dimension and then push the tray back into the printer.
  3. Use the software and documentation CD to install the Lexmark printer software on your computer.
  4. Make sure to connect the Lexmark MS415dn setup to the computer using the supported connection type.

Lexmark Ms415dn Drivers Windows 10

Driver for Lexmark MS415dn Printer
  1. Access the official Lexmark web page from a web browser on your Windows 10 computer.
  2. Search for the Lexmark MS415DN printer, navigate to the Downloads section, and choose the OS of your computer from the Please Select Your Operating System drop-down menu.
  3. Click the printer file link and double-click the file after downloading it.
  4. Start the installation wizard and proceed with the remaining steps that appear on the screen to finish the installation process of the Lexmark MS415DN printer on the Windows 10 computer.
  5. Instead of downloading the printer driver from the manufacturer website, you can use a software and documentation CD to install the Lexmark printer driver.

Lexmark Ms415dn Driver Mac

Driver for Lexmark MS415dn Printer
  1. Click the Driver Download button given on this web page to download the Lexmark MS415DN printer on your Mac computer.
  2. Alternatively, visit the official Lexmark web page and go to the Downloads page of the Lexmark MS415DN printer.
  3. Select the macOS X from the Please Select Your Operating System drop-down list and click the printer driver installer file.
  4. Open the Downloads folder on the Mac computer, double-click the Lexmark printer file, and continue with the on-screen prompts.
  5. This will install the Lexmark MS415DN printer driver on the Mac computer.

Lexmark Ms415dn Manual Download

User Manual for Lexmark MS415dn Printer
  1. To download a soft copy of the Lexmark MS415dn setup manual, click the Manual Download link provided on our web page.
  2. If needed, click the Print icon to get a hard copy of the printer manual.
  1. Instead of downloading it from our website, you can also get the soft copy of the printer manual from the official Lexmark website.

Lexmark Ms415dn Wireless Setup

To know how to perform the wireless setup on the Lexmark MS415DN printer using the control panel, refer to the easy steps mentioned below.

  1. Before beginning with, install a wireless network adapter like MarkNet N8352 on your printer. After that, proceed with the steps given here.
  2. On the Lexmark MS415dn setup’s control panel, press the Home button and select Settings > Network/Ports > Active NIC > Auto.
  3. After pressing the OK button, Active NIC will be set to auto.
  4. Return to the home screen of the Lexmark MS415DN printer.
  5. Select the options that are given here and press the OK button on the control panel.
  6. Settings
  1. Network/Ports
  2. Network
  3. Network Setup
  4. Wireless
  5. Wireless Connection Setup
  6. Choose the SSID or network name of your wireless router and provide the network key.
  7. This will establish a connection between the Lexmark MS415DN printer and the wireless router.

Lexmark Ms415dn Imaging Unit Reset

  1. Turn off the Lexmark MS415DN printer, open the front door, and remove the imaging unit.
  2. After a few seconds, place the imaging unit correctly.
  3. Close the Lexmark printer’s front door properly.

Lexmark Ms415dn Firmware Update

  1. Go to the official Lexmark website, find the Lexmark MS415DN printer, and click the Downloads tab.
  2. Navigate to the Recommended Firmware section and click the latest firmware link.
  3. When the next web page displays on the screen, accept the terms and conditions of Lexmark by clicking the I Agree - Download option.
  4. You cannot download the firmware update file if you do not accept the EULA.
  5. To read and review the EULA of Lexmark, click the End User Agreement link.
  6. The saved firmware file will be saved in the default folder on your computer.
  7. Double-click the firmware file and proceed with the guidelines that appear on the screen.
  8. This will update the Lexmark MS415dn setup to the most recent version.

Lexmark Ms415dn Toner Cartridge Replacement

Locate the button that is present in the right-hand side of the Lexmark MS415DN printer and press it to open the front cover.

  1. Remove the old toner cartridge from the slot.
  2. Unpack a new toner cartridge, remove the packing materials, and shake the toner cartridge well.
  3. Insert the new toner cartridge in the cartridge slot and then close the printer’s front cover properly.

Lexmark Ms415dn Firmware Downgrade

  1. Download the previous version of the Lexmark MS415dn setup from the manufacturer website.
  2. Make sure to agree with the EULA of Lexmark software.
  3. Open the folder where the Lexmark firmware file is saved and double-click the firmware file.
  4. Perform the on-screen guidelines to finish the installation process of the Lexmark MS415DN printer firmware.
  5. This will downgrade the Lexmark firmware automatically.
  6. Note: The manufacturer recommends the user not to downgrade the Lexmark MS415DN printer firmware.

Lexmark Ms415dn Maintenance Kit Reset

  1. While turning on the Lexmark MS415DN printer, hold the 2 and 6 buttons together.
  2. This will boot the printer into Configuration Mode.
  3. Choose the Reset Maintenance Counter option to reset the Lexmark MS415DN printer maintenance kit.
Lexmark Ms415dn Maintenance Kit Reset

Lexmark MS415dn Setup Troubleshooting

Some of the Lexmark MS415DN printer problems frequently occurring are printer status offline, paper jam, USB error, and firmware error. The troubleshooting steps to resolve these problems are provided on our web page. To get assistance in resolving the Lexmark MS415DN printer problems, contact our technical support member by clicking the Call button mentioned below.

Lexmark Ms415dn Offline Solution

  1. Go to your Windows computer, select the Control Panel option from the Start menu and click the Printers and Faxes option.

Default printer:

  1. If you have installed multiple printers on your computer, you are strongly recommended to set the Lexmark MS415DN printer as the default one.
  2. Find the Lexmark MS415DN printer, right-click its icon, and choose the Set as Default Printer option from the context menu.

Status offline:

  1. Once you right-click the Lexmark MS415DN printer, select the Use Printer Online option.

Pause printing:

  1. If you have enabled pause printing, go to the printer context menu and deselect the checkbox next to the Pause Printing option.

Fixed: Lexmark Ms415dn Paper Jam Eror

Paper jammed in the front door:

  1. Lower the Lexmark MS415dn setup’s front door by pressing the button that is located on the right-hand side.
  2. Take out the toner cartridge followed by the imaging unit from the Lexmark MS415DN printer.
  3. Pull out the jammed paper and then place the imaging unit followed by the toner cartridge correctly.
  4. After closing the front door, press the OK button on the printer’s control panel.

Paper jammed in the rear door:

  1. Lower the printer’s rear door.
  2. Clear the jammed paper, close the rear door, and press the OK button.

Solve: Lexmark MS415dn USB Error

  1. Check if the USB cable is not damaged. In case it is damaged, replace the damaged USB cable with a new one.
  2. Try to use a different USB port.
  3. Establish a direct connection between the Lexmark MS415dn setup and your computer without using a USB hub.
  4. Check for the updated USB host controller drivers.
  5. Identifying a USB host controller:
  6. Windows Vista
  7. Open the Control Panel window, select the System and Maintenance option followed by the System option, and click the Device Manager option.
  8. Search for Universal Serial Bus Controllers and then click the plus or add icon next to it.

Lexmark Ms415dn Firmware Error 900.00

  1. Turn off the Lexmark printer and leave it for a few seconds.
  2. Power up the Lexmark printer by pressing the Power button.
  3. Check if any pending print jobs are present in Print Queue. If so, try to clear all the print jobs.
  4. Update the firmware of the Lexmark MS415DN printer to the latest version.
  5. Disconnect all the interface cables like Ethernet, USB, and so on.
  6. Make sure to connect the Lexmark printer’s power cord directly to a wall outlet.

Lexmark Ms415dn Firmware 900.57

  1. Power cycle the Lexmark printer.
  2. Make sure to delete all the print jobs from Print Queue.
  3. Disconnect the data cable and reconnect it after a while.
  4. If the error continues, change the font settings on the Lexmark MS415dn setup.
  5. Also, you can contact our technical experts in resolving the firmware 900.57 problem.