Lexmark E360dn Setup

Carry out the steps that are given below to do Lexmark E360dn setup for the first time.

Unbox the Lexmark printer from the carton box. You will have the following accessories:

  1. Cartridge program information
  2. Software and documentation CD
  3. Operational panel
  4. Power cord
  5. Limited warranty/guarantee statement
  6. Setup and installation guide
  7. The optional installation will have you to install are,
  8. Printer memory card
  9. Flash memory 
  10. Once you take out the printer from the carton box, open the side panel on the right side to open the system board.
  11. Take out the memory card from the sealed packaging.
  12. Hold the memory card by the edges and gently insert the board into the panel.
  13. Take out the flash memory from the sealed package and insert it into the memory card section of the printer.
  14. You can connect the printer to the computer using the USB cable or the Ethernet cable.
  15. Note: if you are going to establish the USB connection, then do not plug the USB cable to the printer now. Connect it only when you install the printer driver on your computer.
Lexmark E360dn Setup
  1. If you are going to establish a wired network connection, then connect the Ethernet cable between the printer and your computer.
  2. Connect the power cord to the printer and connect it to the power source.
  3. Install the 250 or the 550 sheet drawer and unpack the drawer from the sealed packaging.
  4. Remove the paper tray from the printer support unit.
  5. Locate and press the button on the left side of the Lexmark printer to open the front door.Press the release button at the base of the toner kit and lift the toner cartridge with the handle.
  6. Gently insert the toner cartridge along with the rollers inside the printer, matching the imprinted arrows.
  7. The initial Lexmark E360dn setup is now complete, and you can proceed with the driver download and installation.

Lexmark E360dn Driver Download

Driver for Lexmark E360dn Printer
  1. Though the Lexmark E360dn printer comes with an installation CD, you have the option of downloading the printer driver from the official Lexmark support page.
  2. Open the default browser, enter the official Lexmark support URL in the address bar and press the Enter button.
  3. On the right side of the Lexmark page, enter the printer model in the search bar and press the Enter button.
  4. The Lexmark E360dn printer page will open. Here, navigate and click the Product Support tab.
  5. Click the Downloads tab, select the operating system from the drop-down list, and select the driver needed for download.
  6. The driver will be downloaded to the computer. 

Lexmark E360dn User Manual Download

User Manual for Lexmark E360dn Printer
  1. Open the default browser, enter the official Lexmark support URL in the address bar and press the Enter button.
  2. On the right side of the Lexmark page, enter the printer model in the search bar and press the Enter button.
  3. The Lexmark E360dn setup page will open. Click the Product Support tab.
  4. Click the Manuals & Guides tab and click a manual to download.
  5. When the manual opens in a new tab, click the download button on the top right corner of the screen.

Lexmark E360dn Driver Install

  1. You can directly proceed with the installation of the driver from the installation CD provided with the printer.
  2. You can also download the driver from the official Lexmark support page.
  3. Once you have the installer file on your computer, open the file to begin the installation.
  1. Follow the on-screen instructions and click I Agree to the Terms & Conditions.
  2. The driver will be installed on the computer and is ready to use.

How to Change Toner in Lexmark E360dn?

  1. Press the button on the left side of the printer to open the front door.
  2. Hold the handle and gently pull out the toner cartridge present in the printer.
  3. Unpack the new toner cartridge from the sealed packaging, hold the handle, and pull it out of the package.
  4. Gently insert the toner cartridge along with the rollers inside the printer, matching the imprinted arrows.
  5. Finally, close the front door of the Lexmark E360dn setup and perform a test print.

How to Replace PC Kit in Lexmark E360dn?

  1. To replace the PC kit on your Lexmark E360DN printer, follow the steps given below.
  2. Turn on the printer.
  3. Press the button on the left side of the printer to open the front door.
  4. Press and hold the Cancel (X) button on the printer control panel.
  5. Doing this will either show all the lights blinking rapidly on the printer, or the LCD screen will read the message ‘Resetting PC Counter.’
  6. Release the Cancel (X) button and close the front door of the Lexmark printer.

Lexmark E360dn Network Setup

  1. The Lexmark E360dn setup can be connected using a USB or a wired network connection. It does not support wireless network connectivity. If you wish to connect your Lexmark E360dn printer over a wireless network, then you have to install the Lexmark N4050e 802.11g Wireless Print Server. Also, this print server can be used only for wireless printing.
  2. However, to set up a wired network connection on your Lexmark E360dn printer, carry out the following steps.
  3. Turn on your network router.
  4. Connect an Ethernet cable from the router to the Ethernet port of the printer and turn on the printer.
  5. Make sure your computer is connected to the same network using an Ethernet cable.
  6. Insert the installation CD or download the printer driver and run the installer.
  7. Follow the on-screen instruction displayed on the installer window. In the Drivers and Utilities window, select the Network Attach radio button and click the Finish button.
  8. Again, proceed with the instructions displayed on the installation wizard. This will set up your Lexmark printer on the network.

Lexmark E360dn Setup Troubleshooting Guidance

When your Lexmark printer faces issues with its functionalities, you can easily troubleshoot them with some recommended steps. Mostly issues occur in print quality, paper jam, network connectivity, etc. Also, when errors occur, the printer’s display will prompt you so that you can easily identify the cause for the error and resolve it. The user manual provided with the printer manual contains some troubleshooting instructions. If you face difficulties in solving the printer issues, then you can get assistance from our technical experts by clicking the call button available on this page.

How to Clean a Lexmark E360dn Printer?

To clean the Lexmark E360DN Printer,

  1. Turn off the printer.
  2. Take out a lint-free cloth and dampen it lightly with water.
  3. Gently wipe the outside of the printer, in every tray.
  4. Do not wipe the rear end of the printer, since it will be connected to the power source.
  5. Wipe only the outside of the printer. Cleaning the interiors will damage the printer.
  6. Keep the printer aside to dry for some time.
  7. Make sure all the areas of the printer are dry before starting a new print job.

How to Factory Reset Lexmark E360dn Printer?

To factory reset the Lexmark E360DN printer follow the steps given below.

  1. Press the square icon button on the printer’s control panel.
  2. Use the navigation buttons to go to the Settings option.
  3. Navigate to General Settings and select Factory Defaults.
  4. Press the Tick button and select the option Restore Now.
  5. The Submitting Changes message will be seen in the control panel.
  6. The Lexmark E360dn setup is now reset to its factory settings.

Fixed: Lexmark E360dn Paper Jam Error

To avoid paper jams, make sure you take necessary precautions before installing the paper in the paper tray.

  1. Make sure the papers are laid flat in the paper tray.
  2. Make sure that there are no folded edges in the paper.
  3. Do not interrupt or turn off the printer during its print job.
  4. Make sure not to load too many papers and exceed the weight limit of the paper tray.
  5. See if the paper guides in the paper tray are correctly aligned to the edges of the paper.
  6. Make sure to flex and straighten the paper before installing it.

Now, let us look into clearing the paper jam.

  1. The paper jams usually occur in 5 portions of the Lexmark E360dn setup.
  2. Exit bin
  3. Front door
  4. Multipurpose feeder 
  5. Paper tray 
  6. Rear door
  7. The 250- sheet or the 500-sheet tray
  8. Locate the paper jams from each of the 5 portions of the printer.
  9. Be careful in removing the fragments of paper present in either of the 5 portions of the printer.