Lexmark C792DE Setup | First-Time Setup

If you are looking for a color printer that can perform the print operation over a wired or a direct USB connection, then the Lexmark C792de printer would be the right choice. This printer uses the Color Laser technology to perform the print operation. You can also connect the Lexmark C792de printer over a wireless network by using a wireless network adapter like Internal MarkNet N8250 802.11b/g/n wireless. Inside this product package, you can find the Lexmark C792de printer and components such as print cartridges, software & documentation CD, power cord, setup guides, and statement of limited warranty. Note: The print cartridges are pre-installed inside the printer.

The section below will help you to Lexmark C792DE setup for the first time.

  1. Take out the Lexmark C792de printer and its components from the box.
  2. Now, remove all the packing tapes present inside and outside the printer.
  3. Make sure to remove the protective tape surrounding the print cartridges.
  4. After removing all the packing materials, insert the paper bail properly.
  5. Now, take the paper tray out of the Lexmark printer.
  6. Adjust the paper guides of the tray.
  7. Fill the tray with a stack of plain paper.
  8. Align the paper guides.
  9. Place the paper tray back into the printer.
  10. Now, connect the power cord to your Lexmark printer and turn it ON.
  11. Perform the prompts displayed on your printer screen.
Lexmark C792DE Setup
  1. After setting your printer’s basic preferences, install the printer driver on your Windows or Mac computer using the software CD or downloaded driver file.
  2. After completing the driver installation, try a test print.

Lexmark C792DE Driver for Windows 10

Windows Driver for Lexmark C792DE Printer

The Lexmark C792de printer driver file available for Windows 10 are listed below:

  1. IP Setup Utility
  2. Lexmark Status Monitor Center
  3. Universal PCL5e Emulation Print Driver 
  4. Universal Print Driver Installation Package
  5. Lexmark Travel Print plug-in for the Lexmark Universal Driver
  6. Universal PostScript 5 Emulation Print Driver

You can download the driver file(s) mentioned above from your Lexmark C792DE setup’s support page. To do so, follow the instructions given below.

Download:

  1. Go to your Lexmark printer’s support page.
  2. Select your OS type and version from the corresponding drop-down menu.
  3. Now, the driver files available for the selected OS type will be listed on the screen.
  4. Choose the driver file you wish to install and download it.

Install:

  1. Double-click on the downloaded Lexmark printer driver file.
  2. Accept the EULA of the Lexmark printer.
  3. Select the connection type and other options when prompted during the driver installation.
  4. After completing the driver installation, you can try a test print.

Lexmark C792DE Driver for Mac

Mac Driver for Lexmark C792DE Printer

Follow the below-mentioned steps to download and install the Lexmark T642 printer's driver on your Mac:

Download:

To download the Lexmark C792DE printer driver file for your Mac computer from this web page, click the Driver Download for Mac button.

Install:

  1. After downloading the Lexmark printer driver file, open it on your Mac.
  2. When prompted, enter your Mac’s admin password in the given field.
  3. Click the Install Helper button.
  4. Follow the instructions displayed on the installation screen.
  5. Make sure to select the connection type correctly when prompted during the driver installation.
  6. After completing the driver installation process, try to perform a test print.

Lexmark C792DE Setup Manual Download

To download a soft copy of your Lexmark C792de printer’s user guide, click the Manual Download button provided below. The printer user guide will be downloaded in the PDF format. 

User Manual for LEXMARK C792DE

Lexmark C792DE Transfer Module Replacement

  1. First, purchase a new transfer module from a trusted online store.
  2. Now, turn off your Lexmark printer.
  3. Disconnect your printer’s power cord from the electrical outlet.
  4. Now, open door B of your printer.
  5. Take the water toner bottle followed by the imaging kit out of the printer.
  6. Now, open door A of the printer.
  7. Gently, take the transfer module out of the Lexmark C792DE setup.
  8. Take the new transfer module out of its box.
  9. Remove all the packing tapes from the new transfer module.
  10. Insert the new module into its slot.
  11. Close door A of your printer.
  12. Now, place the imaging kit followed by the waste toner bottle back into the printer.
  13. Close door B and reconnect the power cable to the electrical outlet.
  14. Turn on your Lexmark printer and try a test print.

Lexmark C792DE Toner Replacement

  1. To replace the used toner cartridge on your Lexmark C792de printer, open the front door of your Lexmark printer.
  2. Locate and take the empty or defective toner cartridge out of the printer.
  3. Now, take a new toner cartridge out of its box.
  4. Remove all the packing tapes surrounding the toner. Shake the toner cartridge for three times and insert it into its slot.
  5. Close the front door of your printer.

Lexmark C792DE Drum Reset

  1. To reset your Lexmark C792de printer’s drum unit, open the front cover of your printer.
  2. Locate and hold down the Cancel button until the toner light starts to blink.
  3. Now, your Lexmark printer’s drum unit will be reset successfully.

Lexmark C792DE Firmware Update

You can update your Lexmark C792DE setup printer firmware in two steps.

Download the latest firmware file:

  1. Navigate to your Lexmark printer’s support page.
  2. Locate the command line stated Recommended Firmware Update and click it.
  3. Now, the latest Lexmark printer firmware file will start to download.

Install the firmware file:

  1. Open the downloaded firmware file.
  2. Carry out the instructions displayed on the screen.
  3. After installing the latest firmware, try a test print.

Lexmark C792DE Setup Troubleshooting Guidance

Here we have provided the simple troubleshooting steps to solve the common printer issues like paper jam, printer offline, etc. To get remote assistance on the same or other printer issues, contact us.

Guide: Lexmark C792DE Fuser Reset

Carry out the steps mentioned below to reset the Lexmark C792de printer’s fuser count.

  1. Turn off your Lexmark printer.
  2. Now, turn the printer on and while it turns on, press and hold the Check and Right arrow buttons.
  3. Now, select the Reset Fuser Count option when displayed on the printer screen.
  4. Once the fuser reset process is completed, try a test print.

Solve: Lexmark C792DE Error 202.33

The error 202.33 indicates a paper jam in the fuser unit of your Lexmark printer.

To remove the jammed paper from the fuser unit, follow these simple steps.

  1. Open the side door of your Lexmark printer.
  2. If the paper is stuck inside the fuser unit, open the fuser access door and then gently remove the jammed paper.
  3. If the paper is stuck under the fuser unit, firmly grasp the jammed paper and then remove it.
  4. After removing the jammed paper, close the fuser access door and the side door of your Lexmark C792DE setup.
  5. Now, check if the error 202.33 is displayed on your printer screen.
  6. If yes, look for the jammed paper in the fuser unit again.

Lexmark C792DE Offline Solution

Perform these simple steps to resolve your Lexmark printer offline issue.

  1. Initially, check if your Lexmark C782de printer is turned ON.
  2. If your printer is turned OFF, turn it ON.
  3. Check if your computer and the printer are connected to the same network.
  4. If not, connect them to the same network and then check if the error Printer Offline is resolved.
  5. If you're a Windows computer user, then check if the Use Printer Online option is enabled on your computer.
  6. To do so, navigate to your computer’s Control Panel or Settings section.
  7. Select the Printer and Faxes option.
  8. Locate and right-click on your Lexmark printer icon.
  9. Click the See what’s printing option and then click the Printer menu in the next window.
  10. Choose the Use Printer Offline option to deselect it.
  11. Now, try to perform the print operation.
  12. If you encounter the error printer offline again, restart your Lexmark printer and the computer.
  13. Check if you have installed the correct printer driver on your computer.
  14. If not, uninstall and reinstall the correct one on your computer.

Lexmark C792DE Paper Jam Error

One of the common issues faced by most of the printer users is Paper jam. As soon as a paper jam occurs on your printer, you will receive an error message on the product screen. It is necessary to understand jam numbers and locations. You can identify the jammed location easily by understanding the error codes displayed on the screen. The paper jam error codes like 200-239, 24x, 250, 400-403, etc., indicate the paper jam occurred in different locations of the printer. To resolve the paper jam issue, read and proceed with the simple step-by-step instructions given below.

  1. First, identify the jammed location.
  2. After identifying the location, remove the jammed paper from the location.
  3. For example, error 200 indicates a paper jam at the side door of the printer.
  4. To remove the jammed paper from the side door, open the door.
  5. Locate the jammed paper and gently pull it out of the printer.
  6. After removing the jammed paper successfully, close the side door of your printer.
  7. Select the ’Continue, jam cleared’ option, and try a test print.
  8. Similarly, identify the error codes displayed on your printer screen and remove the jammed paper.

Lexmark C792DE Factory Reset

If you wish to reset your Lexmark printer settings to factory defaults, then follow the simple steps given below.

  1. Turn on your Lexmark C792DE setup.
  2. Now, from your printer’s home screen, go to the Settings section.
  3. Select General Settings > Factory Defaults > Restore Now.
  4. Now, the restoring process will be initiated. Wait for some time till the process gets completed.
  5. Once the factory reset process is completed, re-configure your printer settings from the beginning.
Lexmark C792DE Setup Reset