Lexmark C748de Setup

You can set up the Lexmark C748de printer by following the steps given below.You can perform Lexmark C748de setup by following the steps given below.

Step 1: Unbox the printer

  1. First, take out the Lexmark printer from the carton and check the components included in the printer package.
  2. Remove the protective cover and the tapes from the printer.

Step 2: Fixing the cartridges

  1. Open the cartridge door of the printer.
  2. The printer comes with the cartridges pre-installed. Pull out the cartridge drawer.
  3. Remove all the orange shipping restraints from each slot and fix the drawer back to the printer. Then, close the cartridge door.

Step 3: Loading Paper

  1. Pull out the input paper tray from the bottom of the printer.
  2. Slide the paper guides according to the size of the paper that you are going to load.
  3. Fan a stack of paper and load it into the tray. Adjust the guides to the edges of the paper.
  4. Ensure that the paper guides don't fold the edges of the paper.
  5. Insert the tray into the printer.

Step 4: Connecting the power cord

  1. Connect the power cord to the rear side of the Lexmark printer.
  2. Plug in the other end of the power cord to an electrical outlet.
  3. Turn on the Lexmark C748de setup and make the initial settings on the printer.
  4. Select the language using the touchscreen display. Also, set date and time.

Step 5: Installing the printer software

  1. Insert the installation disc into the CD drive of your computer or download the printer software from the official Lexmark website.
  2. Choose the required mode of connection when prompted.
  3. Once you have installed the printer software, you can print easily from your computer.
Lexmark C748de Setup

Lexmark C748de Driver Download

Driver for Lexmark C748de Printer

If you don't have the installation disc, proceed with the steps that are given below to download the driver for the Lexmark printer.

  1. Go to the official Lexmark website from a web browser.
  2. Navigate to the support page and type your printer model number in the search section. Then, click Go.
  3. Select the Support & Downloads link on the left panel. 
  4. Choose your operating system and version from the drop-down list.
  5. Select the required software and click on the Download button.
  6. You can download the driver under Recommended Firmware to get all the functions of the printer.
  7. Otherwise, click on the Driver Download button available on this page to download the driver for the Lexmark printer.

Lexmark C748de Manual Download

User Manual for Lexmark C748de Printer

Do you have the manual of your Lexmark C748de setup? If not, then download the manual by following the steps given below.

  1. Launch a browser and enter the official Lexmark website's URL in the address bar.
  2. Choose your region and type the printer model number in the search section. Then, click on the Go button.
  3. Click the Support & Downloads tab on the left panel and select the Manuals section.
  4. Now, choose the required manual and open it. Then, click on the Download icon on the PDF page to download the manual.
  5. You can also click on the Manual Download button on this page to download the manual. 

Lexmark C748de Driver Installation

  1. Insert the installation disc into the CD drive of your computer.
  2. Double-click on the installer file and click on the Start button.
  3. When the Lexmark Installation wizard appears, click on the Install option.
  4. Click Accept to agree with the terms and conditions of the License Agreement. Then, select Next.
  1. Choose a connection method to connect the printer and computer and click Next.
  2. The driver installation will take a few minutes to complete.
  3. Complete the installation by following the on-screen instruction.
  4. You can view the confirmation message on the screen when the driver is installed.

Lexmark C748de Wireless Setup

Proceed with the steps that are given below to set up a wireless connection on the Lexmark printer.

  1. Note: Make sure you have installed the MarkNet N8250 Internal Wireless Print Server on your Lexmark C748de setup.
  2. You have to configure your wireless router prior to the connection. Also, keep it turned on throughout the setup.
  3. On the touchscreen display of the printer, navigate to Settings.
  4. Tap the Network/Ports option and navigate to the Wireless section.
  5. Choose your wireless network from the displayed list and enter the password of the network.
  6. If your Wi-Fi router has the WPS feature, you can use the WPS method to connect to the network.
  1. Once the printer is connected to your network, install the printer software on your computer.
  2. Click the Wi-Fi icon on the Windows taskbar.
  3. Choose your network and enter the password of the wireless network. Then, click Connect.
  4. Now, install the printer software from the installation disc or downloaded printer software.
  5. Run the installer file and choose the connection type as Wireless when prompted.
  6. Complete the software installation by following the instructions displayed on the screen.

Lexmark C748de Toner Replacement

If you are run out of ink on your Lexmark C748de setup, replace the toner cartridge by following the steps given below.

  1. Lower the ink cartridge door and pull out the cartridge drawer.
  2. Now, remove the used toner cartridge and dispose of it carefully.
  3. Unpack a new toner cartridge and insert it into the cartridge slot.
  4. Ensure that you don't touch the contacts of the cartridge. Also, do not expose the contacts to sunlight as it may affect the print quality.
  5. After fixing the toner cartridge, make sure that it clicks into place. Then, close the cartridge door.

Lexmark C748de Fuser Reset Guide

Consider the steps that are given below to reset the fuser on the Lexmark printer.

  1. Turn off the printer. Now, press the 2 and 6 buttons together.
  2. Turn on the printer by holding the buttons and then release them.
  3. Select Reset Fuser from the Configuration menu. Then, tap Yes to reset the fuser.

Lexmark C748de Duplex Printing


Proceed with the steps given below to perform duplex printing on your Lexmark printer.

  1. While loading paper, place the print side down in the input paper tray.
  2. Make sure to install the printer software on your computer and connect your printer.
  3. Now, open the document you want to print and select Print.
  4. From the printer software, select the double-sided option and required settings for duplex printing.
Lexmark C748de duplex printing guidance

Lexmark C748de Setup Troubleshooting Guidance

Make sure to perform the routine maintenance checks on the Lexmark printer to avoid issues. While loading paper, fan the paper stack well to avoid paper jams. Also, ensure that the loaded paper and size of the touchscreen of the printer matches. Some of the common errors that occur on the Lexmark C748de printer and their troubleshooting techniques are mentioned below. You can also reach us regarding any issues by clicking on the Call button on this page.

Lexmark C748de Offline Solution

If you are facing the offline printer issue, you can't print or scan on the Lexmark C748de setup. Proceed with the steps given below to resolve the issue.

  1. Open the Control Panel window from the Start menu on your Windows computer.
  2. Go to Devices and Printers and right-click on the Lexmark printer icon to select Printer Properties.
  3. Make sure that the Printer Offline option is not turned on.
  4. If you have any print jobs in the queue, clear it to fix the issue.

Lexmark C748de Reset

Continue with the guidelines given below to reset the Lexmark printer.

  1. Turn on the printer and tap the Menu option on the touchscreen.
  2. Navigate to Utilities and go to the Factory Defaults section.
  3. Press the Select button to reset the printer.
  4. All the settings on the Lexmark printer will be reverted back to the factory defaults.

Lexmark C748de Paper Jam Error 


If any paper is jammed, carry out the steps that are given below to fix the paper jam issue.

  1. Turn off the printer and remove the power cord.
  2. Wait for about 10 minutes and allow the printer to cool down.
  3. Lower the rear door of the Lexmark printer and take out the jammed paper by pulling it outside using both hands.
  4. If you find any paper inside the fuser area, remove it.
  5. Make sure that you do not leave bits or scraps of the jammed paper inside the printer.
  6. Pull out the input paper tray and remove the jammed paper under the printer.
  7. Now, fix the input tray and restart the Lexmark C748de setup if the error occurs again.
printer setup support