Lexmark c2240 Setup Support

The Lexmark C2240 printer lets you perform the print operation over a wired or a USB cable connection. If you wish, you can also connect this printer over a wireless connection using an external network adapter. Lexmark c2240 setup for the first time, perform the simple steps given below.

  1. First, take out the Lexmark printer and itscomponents from its package.
  2. Now, remove all the packing materials present inside and outside the printer.
  3. The toner cartridges are pre-installed in the printer.
  4. So, make sure to remove protective tape surrounding the toner cartridges.
  5. After clearing all the packing tapes, pull the paper tray out of the printer.
  6. Adjust the paper guides.
  7. Load a stack of plain paper in the tray.
  1. Re-adjust the paper guides.
  2. Place the paper tray back into the printer.
  3. Now, connect your Lexmark c2240 setup to an electrical outlet and turn it ON.
  4. Set the preferences as instructed on the screen.
  5. Now, proceed to complete the software installation on your computer by using the software CD or the downloaded driver file.
  6. After completing the driver installation, try a test print.

Lexmark c2240 Driver Download

  1. To download the Lexmark C2240 printer driver file for your Windows or Mac computer, click the Driver Download button given below.
  2. Based on your current OS type, the available Lexmark printer driver file will start to download.
  3. You can also visit the official Lexmark site and download the required printer driver.
Driver for Lexmark C2240 Printer

Lexmark c2240 Manual Download

  1. Click the Manual Download button provided at the bottom of the screen to download the Lexmark c2240 setup user guide from this web page.
  2. Alternatively, launch a web browser on your computer and visit the official Lexmark site.
  3. Now, search your printer model and go to the support page.
  4. Download the required user manuals from the support page.
User Manual for Lexmark c2240 Printer

Install Lexmark c2240 Driver

  1. You can perform the Lexmark C2240 printer driver installation on your computer, either using the software CD or the downloaded driver file.
  2. If you have the software CD of the printer, insert it in your computer.
  3. Wait for the installer file to detect your OS and launch the installation wizard.
  4. If your computer does not have the CD tray or the software CD has been damaged, then you can use the downloaded driver file to perform the installation.
  5. Follow the on-screen prompts and complete the driver installation process.
  6. After completing the driver installation, try a test print.

Lexmark c2240 Toner Replacement

To replace the empty or used toner cartridge of your Lexmark C2240 printer, read and proceed with the quick steps given below.

  1. Open the door B of your Lexmark c2240 setup.
  2. Take the empty or used toner cartridge out of the printer.
  3. Now, unpack the new toner cartridge and insert it into its slot.
  4. After ensuring that the toner cartridge has been inserted correctly, close door B.
  5. To check the toner cartridge quality level, try a test print.

Lexmark c2240 Firmware Download

To download the latest firmware for your Lexmark C2240 printer, follow the quick steps given below.

  1. From your Windows or Mac computer’s web browser, navigate to the Lexmark printer’s official site.
  2. Select your Lexmark printer from the list of printers.
  3. Once you reach your printer’s support page, you will see the command line stated as Firmware Update is Now Available;click on it.
  4. Now, the latest firmware file foryour Lexmark C2240 printer will start to download.
Lexmark c2240 Setup

Lexmark c2240 Setup Troubleshooting Guide

Even if you configure our printer correctly, there is a chance for some errors or issues to occur. Some quick solutions to solve the Lexmark C2240 printer offline issue are discussed below. If you encounter any other issue with your Lexmark printer, then contact us to get remote assistance in solving it.

Lexmark c2240 Waste Toner Bottle

The error “Replace the waste toner bottle” is displayed on the printer screen when the waste toner bottle becomes full. To replace the waste or empty toner bottle of your Lexmark C2240 printer, follow the instructions given below.

  1. Open the toner cartridge door followed by the front door.
  2. Remove the right side cover of your Lexmark printer.
  3. Take the used water toner bottle out of the printer.
  4. Place the bottle in an upright position to avoid spilling.
  5. Now, insert the new waste toner bottle into your Lexmark c2240 setup.
  6. Close the cover and the doors.
  7. Now, your Lexmark printer will be ready to perform the print operation.

Lexmark c2240 Factory Reset Guide

The section below will help you to factory reset your Lexmark C2240 printer.

  1. Turn on your Lexmark printer.
  2. Go to the Settings 
  3. Select the Device option followed by Restore Factory Defaults.
  4. Press the OK 
  5. Choose all the settings displayed on your printer screen.
  6. Select the RESTORE
  7. Now, the factory reset process will be initiatedon your printer. Wait for it to complete.
  8. Oncethe printer has been reset, reconfigure your Lexmark printer from the beginning.

LEXMARK C2240 OFFLINE

If you encounter the printer offline issue on your Lexmark C2240 printer, then try some quick solutions mentioned below.

  1. First, make sure that your Lexmark c2240 setup is turned ON.
  2. If not, turn it on and check if the Printer Offline issue is resolved.
  3. Check if you have installed the correct printer driver on your computer.
  4. If not, uninstall it and re-install the correct printer driver.
  5. Check if any print jobs are queued. 
  6. If yes, wait for it to complete and then check if the issue is resolved.
  1. Try restarting your Lexmark printer and the computer.
  2. Enable the Use Printer Online option if it is disabled.
  3. To enable the Use Printer Online option, follow the instructions given below.
  4. For Windows users: Go to the Printers & Faxes section. Select and right-click on your Lexmark printer. Choose the Use Printer Online 
  5. Now, check if the Printer Offline issue is resolved. 
  6. If not, factory reset your Lexmark c2240 setup by referring to the instructions given below.