Perform your HP Deskjet 2734e Wireless Setup in a jiffy using the step-by-step instructions in this article.
Any wireless-compatible printer can be easily installed on a computer or smartphone over a wireless network. The Wi-Fi setup is pretty easy to perform. However, the procedure for the same might vary a little bit based on the printer model you’re using.
If you’re using one of the latest HP printers, you can use the HP Smart app to perform its Wi-Fi setup. Not only using the HP Smart app, but you can also use the WPS-Push or PIN method (if your printer supports it) to perform the same.
Here, we have covered all the possible methods that help you perform the HP DeskJet 2734e wireless setup. Go ahead and read these methods and choose the one you find easiest to perform.
HP DeskJet 2734e Wi-fi Setup All-in-one Guide
Prepare For The Wi-fi Setup
Before you begin the HP DeskJet 2734e Wi-Fi setup, prepare your printer, computer, and wireless router for the same. Preparing the devices for the wireless setup will help you avoid so many wireless setup-related issues during and after the setup.
Switch on your HP DeskJet 2734e printer, wireless router, and computer.
Connect the computer or smartphone (that you’re using for the wireless setup) to a stable Internet connection if it is not yet connected.
Get a WPS-compatible router if you’re planning to use the WPS Push method for the wireless setup.
For the latest Windows, Mac, and smartphone users: Install the HP Smart app on your device if you haven’t installed it yet.
For Windows 7 and older versions of Mac: Download the HP DeskJet 2734e setup software for Windows or Mac.
Using The HP Smart App
This app will automatically detect your printer and install it on a smartphone or computer if the printer is in Auto Wireless Setup mode.
If the Wi-Fi button blinks and the Signal Bars cycle on the printer screen, you can confirm that the Auto Wireless Setup mode is enabled on your printer.
Hold down the Cancel and Wi-Fi buttons simultaneously for 3 seconds to enable this mode on your printer.
Open the HP Smart app. Choose your printer when it is displayed and click Continue. Perform the on-screen instructions to complete the setup.
Using A Router
Using a router, you can use the PUSH or PIN method to perform the HP DeskJet 2734e Wi-Fi setup.
Here, we have shown the Wi-Fi setup using the WPS-Push method.
Hold the Wi-Fi button on your printer for 3 seconds to enable the WPS Push Button method on it.
Now, press the wireless router's WPS button to connect the printer to the Wi-Fi network.
Using The HP Printer Software
Run the printer software on your computer.
Choose the Wireless option when prompted.
Set up the printer for wireless communication by following the on-screen instructions.
This article has covered an overview of performing the HP DeskJet 2734e wireless setup. We believe this article has helped you execute the procedure without a glitch. You can contact us for further assistance in performing the same.
Make use of the call option on this page to reach our support team instantly. They will provide you with real-time assistance in performing the Wi-Fi setup.