HP Officejet Pro 8610 Setup Guidance

Remove the HP Officejet Pro 8610 Printer from its package

1. Take off the packing materials from the printer box.
2. Remove the printer and its components from the box.
3. Prefer a flat surface to place the HP Officejet Pro 8610 setup.
4. Peel off the tapes and remove the packing components from the printer.

Fix the Duplexer (Two-Sided Printing Accessory)

1. Take the duplexer provided in the printer box and unpack it.
2. Peel off the packing tapes from the duplexer.
3. Make sure that the rear side of the printer is facing you.
4. Hold the duplexer with its rollers facing you.
5. Use the sides of the duplexer to hold it.
6. Keep the duplexer into the printer and gently press it.
7. Make sure that the duplexer fits into the place

Load the Tray 1 of the HP Printer

1. Pull the tray of the printer to its maximum limit.
2. Move the paper width guides to its outermost position.
3. Take a bunch of sheets, fan and tap them on an even surface.
4. Insert the sheets in the tray with their print side facing down.
5. Do not forget to fix the sheets by adjusting the guides.
6. Pull the output tray extender and open the paper catch.
7. You can load the Tray 2 if needed.

Insert the Ink Cartridges

1. Open the access cover of the HP Officejet Pro 8610 setup ink cartridge.
2. Wait until the printer becomes idle and settles.
3. Take the new ink cartridge provided in the printer carton and remove it from the package.
4. Hold the cartridge with its nozzle facing the printer and insert it into its slot.
5. Insert all the remaining cartridges in the same way as explained in the previous steps.

Setup the Software of the HP Officejet Pro 8610 Printer

Launch the software of the HP Officejet Pro 8610 printer.

Note: Make use of the Driver Download buttons provided on this page to obtain the printer software for free.

HP Officejet Pro 8610 Driver Download Guide

1. It is impossible to execute the operations of the printer without installing its software.
2. You can install the software only after downloading it. So, it is necessary to download the software of the printer.
3. The download process can be executed after setting up its hardware.

HP Officejet Pro 8610 Manual Download

1. Make sure that the HP Officejet Pro 8610 setup is switched on.
2. Raise the ink cartridge access door.
3. The carriage moves to the left of the HP printer.
4. Wait until the carriage slides and settles at its place.
5. Push the cartridge which you intend to replace and take it out from the printer.

6. Unpack a new ink cartridge which you have purchased to replace the old one.
7. Handle the cartridge with its contacts facing the printer.
8. Fix the cartridge into its slot and press it gently.
9. Make sure that the cartridge fits into the slot.
10. Close the access door which you have opened previously.

HP Officejet Pro 8610 Driver Installation Guide

1. You can either use the installation CD provided in the printer box or the Driver Download key on this page to install the HP Officejet Pro 8610 printer software.
2. The latest version of the full feature HP Officejet Pro 8610 printer software is provided on this page for free.
3. Open the downloaded file, follow the instructions to install the HP Officejet Pro 8610 printer software.
4. For installing from the software CD, insert it into the disc drive of your computer, follow the prompts to launch the driver.
5. You can set up the connection between your HP Officejet Pro 8610 setup and computer while installing the software.

HP Officejet Pro 8610 Scanner Driver Guide

1. You can utilize the full feature software to perform the scan function of the HP Officejet Pro 8610 printer.
2. The scan software is used to perform only the scan function of the printer. Also, the size of the driver file is less when compared with the full feature driver.
3. There is no scanner driver designed for HP Officejet Pro 8610 setup.

HP OJPRO 8610 Wireless Setup Guide

1. Enable the Wi-Fi feature on your computer to which you need to connect the printer.
2. Find the network name of your router and select it.
3. Also, provide the router’s passkey when the system prompts.
4. Make sure that you place the HP Officejet Pro 8610 printer and computer within the network range of the router.
5. On the panel of the HP printer, tap Setup, Network, or Wireless.
6. Choose Restore Network Settings.
7. Make sure the wireless light on the HP Officejet Pro 8610 setup turns on.
8. Choose the Wireless Setup Wizard option.

HP OJPRO 8610 Printhead Replacement Guide

1. Make sure that you have bought a new printhead to replace the old one.
2. Load compatible sheets in the input tray of the HP Officejet Pro 8610 printer.
3. Tap the power key on the printer to turn it on.
4. Raise the access cover of the printer’s ink cartridge.
5. Raise the handle of the latch on the carriage.
6. Remove the print head from the printer by handling its sides.
7. Unpack the newly purchased printhead with cartridges.
8. Make sure that the electrical contacts of the printhead should not be touched.
9. Handle the printhead with its electrical contacts facing the rear of the printer.
10. Fix the printhead into the carriage.
11. Close the latch handle on the carriage.
12. Make sure that the paper tray of the HP Officejet Pro 8610 setup is loaded with compatible sheets.
13. Fix the new cartridges in the printhead and close the access cover.

Guide: HP OJPRO 8610 Print from USB

1. Use the power button of the HP Officejet Pro 8610 printer to turn it on.
2. Find the USB drive slot on the left of the printer.
3. Insert the drive into the slot until it stops.
4. Once the HP Officejet Pro 8610 setup detects the drive, the status light starts to flash.
5. Now the Photo screen displays on the control panel of the printer.
6. Tap the View & Print option.
7. Now the panel of the printer displays the photos or documents on the USB flash drive.
8. Follow the guidelines on the panel to choose, edit, and print your photos or documents.

HP Officejet Pro 8610 Double-Side Printing Guide

1. Before you begin the printing process, edit the document for printing.
2. Open the document using any word application on your computer.
3. Locate the File name and click the Print option.
4. To configure the more settings, click the Printer Properties or Preferences option.
5. Go to the Layout, Finishing, or Features tab and choose the Print on Both Sides option.
6. Click OK Print.
7. Follow the guidelines on the panel to perform the print function.

How to Print Labels on HP Officejet Pro 8610?

1. Open a word application on your computer.
2. Go to Tools and select Letters and Mailings.
3. Select the Envelopes and Labels option.
4. Click the Labels tab.
5. Place the labels for printing in the respective place of the HP Officejet Pro 8610 setup.
6. Tap the Print option for printing the labels.
7. For detailed guidance to print labels on the HP Officejet Pro 8610 printer, reach our well-qualified technical experts.

How to Scan in HP Officejet Pro 8610?

1. Refer to the following steps to execute the scan function by using the Apple Image Capture software tool.
2. Click the Finder icon on the display of your Mac device.
3. Tap the Go button in the top menu bar.
4. Select Applications to double-click Image Capture.
5. Choose your printer name in the Devices or Shared list.
6. Set the scan settings like the Scan Mode, Kind, Resolution, Size, Scan To, Name, Image Correction, and Format.
7. Tap Scan to begin the scan function.

Fixed: HP OJPRO 8610 won't Scan Issue

1. Examine the link between your HP printer and computer.
2. Clean the scanner glass of the HP Officejet Pro 8610 printer by using a lint-free cloth.
3. Make use the HP Print & Scan Doctor app to solve the issue.
4. Reset the HP Officejet Pro 8610 printer to its default configurations.
5. If you are finding it difficult to fix the scanning issue with the HP Officejet Pro 8610 printer, contact our well-qualified technical support team.

How to Reset HP Officejet Pro 8610 Printer?

1. On the control panel of the HP Officejet Pro 8610 setup, swipe and locate the Setup option.
2. Choose the option and select Tools.
3. Select Restore Factory Defaults and tap Yes.
4. Now the HP Officejet Pro 8610 printer resets to its default settings.

Why is HP OJPRO 8610 Printer offline Issue

The HP Officejet Pro 8610 setup offline issue occurs due to poor power connection. So, it is necessary to check the power connection of the printer to solve the issue.