The HP Officejet Pro 8210 Installation is simple and easy to perform. Unpack the product box and remove all the packing tapes from the printer. Connect the printer to an electrical outlet. Set the basic printer settings and load paper in the tray. Followig that, install the ink cartridges in their slots. Finally, install the HP Ojpro 8210 Driver on your computer and connect it to a computer over a network or using a USB cable.
Step-by-step instructions to perform the HP Officejet Pro 8210 Printer Setup for the first time
The basic and full feature HP Officejet Pro 8210 Driver is available for download. You can download the printer driver and its manual freely from this page. Locate and click the Windows/Mac Driver Download button provided on this page to download the printer driver. Similarly, to download the printer manual, locate and click the Manual Download button.
The HP Officejet Pro 8210 Printer supports the Wi-Fi and Wi-Fi Direct interfaces. The below section explains the wireless setup using the printer’s control panel.
Using the HP printer’s control panel
Using the EWS
The troubleshooting steps to resolve the few printer issues are given below. To get remote assistance on the same and the other printer issues, contact our support team.
If you encounter any of the printhead problem such as incompatible printhead, missing or failed printhead, printhead failure, printhead is missing, not detected, or not properly installed, etc., then try the following solutions to resolve it.
Error codes indicate that your printer is encountering some problems with its hardware or software. Based on the error code displayed on HP Officejet Pro 8210 or the computer screen, the troubleshooting methods might vary. For example, if Alignment error is displayed on the screen, then perform the following troubleshooting methods.