Guidance for HP Officejet 200 Mobile Printer Setup

Step 2 : Fix the battery of the printer

1. Place the HP Officejet 200 mobile printer with its rear side facing you.
2. Gently push the latch of the battery cover to the right.
3. Pull the battery cover and remove it.
4. Unpack the battery.
5. Fix the battery into its slot.
6. Slide the battery cover into its slot.

Step 3 : Set up the power connection & configure your preferences.

1. Attach an end of the power cable to the HP Officejet 200 Mobile Printer Setup and the other end to a power supply directly.
2. Use the power button of the printer to turn it on.

Step 4 : Load compatible sheets in the input tray of the printer

1. Raise the door at the top of the HP Officejet printer.
2. Also, raise the control panel.
3. Slide out the width guides to their maximum extent.
4. Keep up to 50 sheets in the paper tray of the HP Officejet printer.
5. Align the sheets by adjusting the paper width guides.

Step 5 : Fix the ink cartridges.

1. Raise the ink cartridge access door of the HP Officejet 200 Mobile Printer Setup.
2. Now the carriage moves and settles at its place.
3. Unpack the ink cartridges given in the printer box.
4. Peel off the packing tape on the ink cartridge.
5. Fix the ink cartridge into the printer.
6. Close the access cover of the ink cartridge.
7. Now the HP Officejet 200 mobile printer prints an alignment page.

Step 6 : Install the software for the printer

1. Launch the HP Officejet 200 mobile printer software on your computer.

Note : Make use of the Driver Download key on this page to avail the printer software.

1. Begin the HP Officejet 200 Mobile Printer Setup cartridge replacement process by turning it on.
2. Make sure that the paper tray of the printer is loaded with suitable sheets.
3. Raise the access cover of the ink cartridge.
4. Wait until the carriage settles at its place.
5. Lift the latch of the cartridge which you need to replace.
6. Take out the cartridge from the printer.
7. Unpack a new cartridge and remove the tapes on it.
8. Fix the cartridge into its slot.
9. Close the latch and access cover.
10. Now the printer aligns the ink cartridge automatically.

HP Officejet 200 Wi-fi Setup Guidance

1. Power up the printer by using its power button.
2. Ensure that the cartridges are inserted properly.
3. Also, make sure that the paper tray of the printer is loaded with suitable sheets.
4. "Click" the Start or Windows menu on the display of your computer.
5. Go to Settings and select Devices.
6. "Choose" the Printers & Scanners option.
7. Select the Add a Printer or Scanner option.
8. "Choose" Show Wi-Fi Direct Printers.
9. Find the name of your printer which includes the word Direct.
10. Make sure that your printer is in the ready state.
11. Click the Add Device button near the name of your printer.
12. Now an 8-digit pin appears on the control panel of the printer.
13. Specify the pin on your computer to execute the connection between your HP Officejet 200 Mobile Printer Setup.

How to Scan on HP Officejet 200 Mobile Printer?

1. Make sure that the "HP Smart app" is installed on your computer.
2. Open the application and choose your printer name.
3. If your printer name is not present, use the plus (+) sign to view your printer name.
4. Tap the Scan tile on the display of the printer.
5. Now the scan window appears on the screen.
6. Configure the scan settings like the document type, paper size, output tray, resolution, source, and more.
7. Tap the Scan key and click Apply.
8. Modify the settings like the Print, Rename, Save, Share, and Add a Page.
9. Tap OK to begin the scan function.