HP Officejet 150 All in one Printer Setup Technical Guide

The HP Officejet 150 All in one Printer Setup is a compact printer that fits any place in your home or office. After purchasing the Officejet 150 printer from the manufacturer, you have to set it up. Follow the guidelines in the following topics to configure the hardware and software of your printer. We also provide troubleshooting methods for solving the printer issues. Even our technical experts guide in solving the problem in your printer.

HP Officejet 150 All in one Printer Setup

How to Install HP Officejet 150 Printer

  1. Once you get the HP Officejet 150 All in one Printer Setup from the manufacturer, check if it is sealed properly.
  2. Unbox the printer box and check if the printer components are provided in it.
  3. Take the printer from the box and keep it on a plane surface.
  4. Peel off the blue-colored tapes from the printer.
  5. Also, remove the packing materials.
  6. Unpack the power cord provided in the printer package.
  7. Link the cable to the corresponding port of the printer and power supply.
  1. Power on the HP Officejet 150 printer by force pressing its power button.
  2. Configure the preferences on the control panel.
  3. Load the paper tray with suitable papers.
  4. Open the access door at the front and raise the cartridge latch.
  5. Unpack the cartridges provided in the printer package.
  6. Peel off the protective tapes on the cartridge.
  7. Insert the cartridges into the corresponding slots.
  8. Close the latch and access door.
  9. Align the cartridges using an alignment sheet and complete the first time printer setup.

HP Officejet 150 printer Driver and Manual Download

Obtain the manual and driver of the HP Officejet 150 All in one Printer Setup from the Driver Download and Manual Download buttons provided on this page. You can get the printer and driver from this site for free. We offer the recent version of the printer software that is compatible with the operating system version of your computer or laptop. Click the buttons and get the driver & manual on your computer.

Install Driver for HP Officejet 150 Printer

  1. Once you download the HP Officejet 150 All in one Printer Setup software, install it on your computer.
  2. Double-click on the printer downloaded driver file to install it.
  3. Go through the guidelines on your computer screen.
  4. Configure the connection method between your printer and computer based on the specification of the devices.
  5. Accept the terms and conditions by enabling its checkbox.
  6. Continue with the guidelines and complete the installation process.
  7. The installation process may vary based on the operating system version of your computer or laptop.
HP Officejet 150 All in one Printer driver install

How to Connect HP Officejet 150 with USB Cable

  1. Disconnect the USB cable from your printer & computer if connected.
  2. Install the latest version of the full-featured printer software on your computer if you have not installed yet.
  3. Launch the software and go through the guidelines on the screen.
  4. Choose the connection methods as wired (USB connection).
  5. Unpack the USB cable provided in the printer package.
  6. Link the cable to the corresponding port of the printer and computer.
  7. Thus your HP Officejet 150 All in one Printer Setup and computer are connected using the USB cable.

How to connect HP Officejet 150 via bluetooth

  1. Enable the Bluetooth features on your printer using related options.
  2. Go to Bluetooth Settings on your computer or Mobile device.
  3. Wait until the printer name appears in the list of discoverable devices.
  4. Select your printer name to pair the printer and computer.
  5. Thus the Bluetooth setup is completed.
  6. Now you can perform any function of the HP Officejet 150 printer.

How to Install HP Officejet 150 Ink Cartridge

  1. Power up your HP Officejet 150 Printer by force pressing its power button.
  2. Lift the access cover and cartridge latch of the printer.
  3. Take the new ink cartridges provided in the printer package.
  4. Peel off the pink-colored protective tapes on the cartridges.
  5. Insert the cartridges into the respective slots.
  6. Close the cartridge latch and access door at the front.
  7. Load the input tray with suitable papers.
  8. Print an alignment using a related option on the control panel of the printer.
  9. Arrange the cartridges using an alignment sheet and complete the installation process.

How to Replace Ink Cartridge on HP Officejet 150

  1. Power up your HP Officejet 150 All in one Printer Setup if it is turned off previously.
  2. Lift the front access door of the printer.
  3. Now the carriage moves to its place and becomes idle.
  4. Wait until the carriage settles.
  5. Raise the front access cover and cartridge latch of the printer.
  6. Gently press the cartridge which you want to replace and remove it.
  7. Unpack a new ink cartridge & peel off the pink-colored protective tapes on it.
  8. Insert the cartridge into the corresponding slots.
  9. Close the latch and front access cover of the printer.
  10. Load suitable papers into the input tray.
  11. On the printer’s control panel, tap Setup.
  12. Select Tools --> Align Ink Cartridges.
  13. Go through the instructions on the display and arrange the cartridges.

How to reset HP Officejet 150 Printer

You install an ink cartridge when you are setting up your printer for the first time. Go through the following instructions to understand ink cartridge installation.

  1. Power up your HP Officejet 150 All in one Printer Setup by force pressing its power button.
  2. Wait until the printer turns on and becomes idle.
  3. Disconnect the power cable with the printer turned on.
  4. Wait for a few minutes.
  5. Link the power cord back to the printer and power supply.
  6. Once you plug the cable, the printer turns on automatically.
  7. If the printer does not power up, turn it on by long pressing its power button.
  8. Do not establish the power connection using a surge protector as it may produce power fluctuations.
  9. Thus the reset process is made successfully.

HP Officejet 150 Printer Troubleshooting

The troubleshooting methods are used to fix the printer issues so easily. Follow the solutions in the upcoming topics to solve the problems that occur in your HP Officejet 150 printer.

HP Officejet 150 Bluetooth not Printing PDF

  1. Check the Bluetooth connection between your HP Officejet 150 printer and computer.
  2. Reconnect the devices.
  3. Restart your HP Officejet 150 printer and computer.
  4. Check the print settings.
  5. Delete the HP Officejet 150 printer software on your computer or laptop.
  6. Download & install the current version of the HP Officejet full-featured printer software on your computer.
  7. You can get the printer driver from this site for free.
  8. Execute a printer function and check if the problem is solved.
  9. If the Bluetooth not printing PDF issue persists, get in touch with our technical team.

HP Officejet 150 Won't Print or Copy

  1. Remove the cartridges from the HP Officejet 150 All in one Printer Setup & check for ink clogs and damages on them.
  2. Disconnect the power cable with the printer powered on.
  3. Unplug the USB cable if connected.
  4. Wait for a few minutes.
  5. Tap & hold the power button for a few seconds.
  6. Now link the power cable to the respective port of the printer and power supply.
  7. Do not make the power connection using a surge protector as it may produce power fluctuations.
  8. Once you connect the cable, the printer powers on automatically.
  9. If the HP Officejet printer does not turn on, power it up by force pressing its power button.
  10. Execute a printer function and check if the problem is solved.

HP Officejet 150 Paper Feed Issues

  1. Power off your HP Officejet 150 printer if it is turned on previously.
  2. Disconnect the power cable from the Officejet 150 printer and power supply.
  3. Open the latch to release the scanner glass.
  4. Check for jammed papers behind the control panel.
  5. After removing the jammed papers, you can find the two textured touch points.
  6. Use the two points to open the scanner glass.
  7. Connect the power cable to the respective port of the printer and power supply.
  8. Execute a printer function and check if the problem is solved.

HP officejet 150 Connection Problems

  1. If you connect the devices using a wired connection, check if the HP Officejet 150 All in one Printer Setup and computer are linked to the same network of a router or access point.
  2. Ensure your router provides an active internet connection.
  3. For the wired connection, ensure the USB cable is linked to the respective port of the printer and computer.
  4. Reset your HP Officejet 150 printer and computer.
  5. If the connection problem persists, contact our techies for more guidance.

Copyright © 2023 - 2024 printer-setup.us | All Rights Reserved.

printer setup support
➤