HP Laserjet P2035 Setup Guidance

  • Open the HP P2035 printer box.
  • Take the HP Laserjet p2035 setup out and set it on a flat surface.
  • Take the HP printer accessories such as the user guide, the installation CD, and USB cable out of the box.
  • Peel off the tape stuck to the rear side of the printer.
  • Press the button on the top of the printer to release the front tray.
  • Pull it down and then remove the tape from the top of the printer.
  • "Unpack" the printer cartridge and remove the plastic film by pulling the orange cap located on the left side of the cartridge.
  • Place the cartridge in the HP P2035 printer’s slot and raise the front lid.
  • Pull out the HP Laserjet P2035 printer’s paper tray. Load a stack of paper in the HP machine’s paper tray and push the tray into the printer.
  • Load the HP Laserjet P2035 printer CD into your computer’s CD tray and follow the on-screen prompts to install the HP P2035 driver on your computer.
HP Laserjet P2035 Setup

HP Laserjet P2035 Driver Download Guidance

HP Laserjet p2035 Driver Download for Windows

Click the Driver Download button located in the Windows section to download the HP P2035 Windows driver.

Windows Driver for HP Laserjet p2035

HP laserjet p2035 Driver Download for Mac

Click the Driver Download button located in the Mac section to download the HP Laserjet P2035 Mac driver.

Driver for Epson HP laserjet p2035 Printer

HP Laserjet P2035 Driver Installation

  • Here are the guidelines to install the HP P2035 driver on your computer.
  • Insert the HP Laserjet 2035 driver CD into your computer’s CD drive.
  • Open the P2035 driver CD’s main folder and right-click the HP 2035 installer. Choose the ‘Run as administrator’ option from the list.
  • Click the Easy Install radio button and then click Next.
  • Click Next again, and then choose the HP P2035 driver from the list. Click Next.
  • Click the ‘Connect via the USB’ radio button and click Next.
  • Left-click the ‘Select from a list of detected printers’ radio button and click Next.
  • Follow the rest of the HP 2035 printer installer’s on-screen prompts to complete the driver installation.

HP Laserjet P2035 Wireless Setup

  • Follow these steps to perform the HP Laserjet P2035 wireless setup.
  • Make sure that you have the HP Wireless accessories, such as the Mobile Print Accessory, power cable & adapter, and USB cable.
  • Take the HP 1200w NFC/Wireless Mobile Print Accessory out of the box and connect it to a power source by using the HP power cable provided.
  • Ensure that the power cable is connected to the HP Mobile Print Accessory’s rear Power port.
  • Take the HP Laserjet P2035 Setup Mobile Print Accessory's USB cable and connect it to the printer’s rear USB Type-B port and its USB Type-A port.
  • Ensure that these cables are plugged in correctly and then check the status lights on the HP1200w Accessory.
  • If the light glows green, it means that the connection is active.
  • Locate the multifunction button on the wireless Accessory's side. Press and hold it to print the test page.
  • Establish a peer-to-peer connection. Enable Wi-Fi on your smartphone/tablet and search for the HP wireless accessory’s SSID. (This SSID can be found on the wireless accessory’s label.
  • When connected, the wireless accessory’s status LED glows blue. This completes the P2035 wireless setup.

How do I scan on HP Laserjet Enterprise P2035?

The HP Laserjet P2035 setup does not execute the scan function.

How to Replace Ink Cartriges HP Laserjet P2035?

  • Follow these guidelines to replace the ink cartridge on an HP P2035 printer.
  • Power on the HP Laserjet P2035 printer and wait until the device initializes.
  • Press the button located on the top of the HP P2035 printer and lower the print cartridge door.
  • Remove the old HP print cartridge and set it aside for recycling.
  • Remove new the HP Laserjet P2035 printer cartridge from the box and set it aside.
  • Look at the cartridge guides on the printer and install it.
  • Close the HP Laserjet P2035 setup’s ink cartridge access door.
  • The HP printer recognizes the hardware changes and initializes once again.
How to Replace Ink Cartriges in HP Laserjet P2035

How to Check Toner Level in HP Laserjet P2035?

  • Open the Windows HP Smart app.
  • The HP P2035 printer’s toner levels are mgautolayed on the dashboard.
  • If no printer is mgautolayed, click the + icon and follow the on-screen prompts to add the HP printer to your computer.

How to Connet HP Laserjet P2035 Setup to Computer?

  • Download the latest HP Laserjet P2035 driver on your computer.
  • Run the P2035 driver installer as an administrator on your computer.
  • Follow the HP installer’s on-screen prompts until the ‘Power Connections’ screen appears.
  • Click the ‘Connect via the USB Port’ radio button and continue following the rest of the on-screen prompts.
  • Once the HP P2035 driver is installed, the Finish button appears on the installer window.
  • Click it to complete the installation.

How to Clean HP Laserjet P2035?

  • Press the button at the top and lower the HP Laserjet P2035’s front door. Take the print cartridge out.
  • Use a dry cloth to remove residue from the print cartridge cavity and media-path area.
  • Set the print cartridge in its slot and close the front cartridge door.
How to Clean HP Laserjet P2035

To Clean the Paper Tray Roller

  • Power off the HP Laserjet P2035 Setup.
  • Ensure that the HP Laserjet printer is cooled down and then lower the front cartridge access door.
  • Remove the HP P2035 printer’s cartridge and set it aside.
  • Raise the pickup roller cover. Push the black retaining tabs out to release the pickup roller.
  • Take the pickup roller out. Dip a cloth in water and wipe the roller to remove dirt/ink from the roller.
  • After the pickup roller has dried, reinstall it in the printer.
  • You should hear a click when the pickup roller locks in place.
  • Lower the pickup roller cover, reinstall the cartridge and close the ink cartridge door.

How to Fix Paper Jam HP Laserjet P2035?

  • Press the HP 2035 printer’s button at the top and lower the ink cartridge access door.
  • Carefully remove the P2035 printer’s ink cartridge and set it aside.
  • Locate the jammed paper by using a flashlight.
  • Grasp it gently with both hands and pull it out of the printer.
  • Reinstall the ink cartridge and close its door.
  • Go to the HP Laserjet P2035 Setup’s jam release door on the rear side of the printer.
  • Lower the jam release door and locate the jammed paper.
  • Pull out the jammed paper by using both hands.
  • Raise the jam release door and return it to its initial position.
How to Fix Paper Jam HP Laserjet P2035

How to Reset HP Laserjet P2035?

  • Power off the HP Laserjet P2035 printer.
  • Power on the HP Laserjet printer. As the printer gets powered on, press the two control panel buttons, and keep holding them.
  • You should see the LEDs blink at the same time.
  • Wait until the HP Laserjet P2035 setup initializes.

Fixed: HP Laserjet P2035 won't Print Issue

  • If the Laserjet P2035 printer does not print a PDF document, follow these steps to resolve it.
  • Navigate to ‘https://get.adobe.com/reader/’ on your web browser.
  • Go to the ‘Your system’ section and click the ‘Install now’ button.
  • Wait until the PDF reader is installed on your computer.
  • If this does not solve the HP P2035 printing issue, uninstall the printer driver.
  • Download the HP Laserjet P2035 setup’s latest printer driver from the manufacturer’s site and install it on your computer.
printer setup support