HP Laserjet Tank Mfp 2604sdw Setup

There are a lot of printer models on the market now, which is why it's important to know how to properly set up your printer. Setting up your HP LaserJet Tank MFP 2604sdw printer is relatively simple, but it can be a bit confusing. Sometimes customers who have purchased the latest printer models find it difficult to understand how to set up their printers. This is an easy guide to help you set up your HP LaserJet Tank MFP 2604sdw printer. This web page will show you how to set up your HP LaserJet Tank MFP 2604sdw printer to ensure that it's ready for use the first-time printing.

HP Laserjet Tank Mfp 2604sdw Setup

Unboxing & Setup Instructions

If you are looking for information about unpacking and setting up a printer, then this section is just for you. It will teach you how to unpack and set up your HP LaserJet Tank MFP 2604sdw printer. Refer to these guidelines before going through the meticulous process of unpacking and setting up your printer.

  1. Open the product package and remove all contents.
  2. Discard the packaging cover of the printer and its accessories.
  3. Plug the included power cord into the printer's power port and an electrical outlet.
  4. Turn on the HP LaserJet Tank 2604sdw printer by pressing the Power button.
  5. Pull out the paper cassette and lift the compartment cover. Move the paper guides to the extreme ends of the input tray.
  6. Insert a fresh stack of paper into the input tray with the print side facing up.
  7. Adjust the paper guides against the stack but not too tightly.
  8. Finally, pull out the output tray.
  9. Now, download HP Smart and install it on your computer.
  10. Open the app and add your printer. Then, you can start accessing the printer from your computer.
Unboxing And Setup Printer

HP Laserjet Tank Mfp 2604sdw Driver Download

No matter which printer you buy, a compatible driver is mandatory. Without the right driver, it becomes impossible to access your printer from the computer. For your HP LaserJet Tank MFP 2604sdw printer, you can get the software from its official page. From your browser, visit the page and enter your printer model. Then, you need to download the software depending on your Operating System. If you find this a cumbersome procedure, click the Driver Download button given on this page. In a short duration, the compatible software will be downloaded to your computer. Now, you can proceed with the installation.

Driver Download For Windows
Driver Download For Mac

HP Laserjet Tank Mfp 2604sdw Driver - Install

  1. Locate the downloaded software on your computer and run the setup file.
  2. If you install the software on a Windows computer, you need to choose Yes when User Account Control appears.
  3. For a Mac, it's different; you need to provide the administrator credentials when prompted.
  4. Accept the terms and conditions if the software's license agreement screen appears.
  5. When prompted to pick the connection type, choose the option you prefer and connect your printer and computer accordingly.
  6. Go ahead with the onscreen instructions and complete the installation.
Install The Driver Software

Manual Download

Regarding the manual, it is important to remember that it is not just a list of instructions on how to use a product. The manual is there to provide instructions on how to use the product in general and, even more importantly, how to prevent any damages that could happen when you are using the product. It is good to take your manual seriously and read it before using your product. You need to visit the official web page to get the compatible manual for your HP LaserJet printer. However, you can skip this step and just click the button below to get the guide.

Manual Download

Make HP LaserJet Tank Mfp 2604sdw Wireless - Wi-Fi Setup

Wireless printing has been around for years, but it is still a new technology for many users. It is literally the ability to print from any wireless device, such as a computer, tablet, or smartphone. The benefits of wireless printing are that it is more affordable, and you can print wirelessly from anywhere. This section will teach you how to complete the HP Laserjet Tank MFP 2604sdw Wi-Fi setup.

USB Setup For HP LaserJet Mfp 2604sdw

If you are looking for the right procedure for connecting your printer to the computer via USB, these guidelines can help.

  1. Visit HP's website from your default browser and download the HP Easy Start software.
  2. Locate the file in the Downloads folder and run the setup file.
  3. If User Account Control appears, click the Yes button. Then connect a USB cable between your HP LaserJet printer and the computer.
  4. Accept the terms and conditions when the Software License Agreement screen appears.
  5. When the Printer Found screen appears, ensure your HP LaserJet 2604sdw printer is selected. Then, click the Continue button.
  6. In case you cannot find your printer, check your USB cable and ensure the cable is working fine and connected firmly to both ends. Then, click the My Printer is Not Shown button.
  7. When prompted, choose the drivers you want to install and click the Continue button.
Run The Setup File

This is how you should establish a USB connection between your printer and computer.

Mobile Printing Setup

We are living in a digital age and we are surrounded by technology. Nowadays, most people have a smartphone and use it to print their documents. In this section, we will show you how to print your documents from your iOS and Android devices.


  1. If you have an iOS device, you can print your documents without installing any indigenous application.
  2. You can do this with Apple's AirPrint feature.
  3. To do this, open the document/photo you want to print.
  4. Tap on the Share icon and select Print.
  5. Pick the required number of copies and make the other changes to your document.
  6. Finally, tap on the Print button.
Tap On The Print Button

HP Smart - HP Laserjet Tank 2604sdw

The Hp Smart Application
  1. Connect your smartphone to your Wi-Fi network.
  2. Get the HP Smart app from the Google Play Store or App Store.
  3. Enable Bluetooth and Location on your phone.
  4. Open the HP Smart app on your smartphone and tap the + icon or Add a Printer option.
  5. When it shows you a list of printers, pick your HP LaserJet Tank 2604sdw printer.
  6. Follow the instructions and establish a connection between your devices.
  7. If prompted, create or sign in to your HP account.
  8. Connect your computer to the same router and start printing wirelessly using the HP Smart application.

Enrolling Instant Ink Subscription

  1. Visit HP instant ink page from your default browser.
  2. Here, click the Sign Up Now button.
  3. Now, select your HP LaserJet 2604sdw printer.
  4. Choose the preferred subscription and input the enrollment key.
  5. When prompted, provide the required details to create an HP Connected account.
  6. Now, sign in to your HP Connected account and click Instant Ink, followed by Overview> Enroll a Printer.
  7. Proceed with the instructions and complete the enrolment process.
click the Sign Up Now button

Printing Photos Or Docs

Make The Appropriate Changes
  1. Before printing documents, ensure your printer is turned on and connected to your computer via Wi-Fi or USB.
  2. Ensure you have loaded enough sheets into the printer and installed the compatible software on your computer.
  3. Open the document or image you want to print.
  4. Click File, followed by Print.
  5. Now, click Properties/Preferences.
  6. In the Properties/Preferences window, go to the Layout tab.
  7. Select the orientation as Portrait or Landscape.
  8. Make the appropriate changes and click OK> Print.


  1. First, download the scanner software from HP's official website.
  2. Follow the instructions on the screen to install it on your computer.
  3. Before scanning a document, make sure your printer is turned on and connected to your computer via Wi-Fi or USB.
  4. Start by placing the originals on the scanner glass or ADF.
  5. Open the scanner software and go to Print, Scan, & Fax.
  6. On the following screen, click Scan> Scan a Document or Photo.
  7. Make the appropriate changes to your document and specify the destination to which you want to save the document.
  8. Finally, click the Save button.
To Save The Document


If you want to make copies using the HP LaserJet 2604sdw printer, here are the instructions you should follow.

Pressing The Up And Down Buttons
  1. Load your document on the scanner glass; make sure to place the originals according to the indicators on the printer.
  2. On the HP LaserJet printer control panel, press the Menu button to choose the copy settings.
  3. Specify the required number of copies by pressing the Up and Down buttons.
  4. Make the other changes according to your preference and press the Copy button.
  5. Now, your printer starts copying the documents.


Are you experiencing issues with your HP Laserjet Tank MFP 2604sdw printer? If you think so, remember that you're not alone. Many users of this popular printer have encountered problems with printing, scanning, and connecting devices. Fortunately, there are several simple solutions that you can use to resolve any issues. In this article, we'll be discussing the HP Laserjet Tank Mfp 2604sdw troubleshooting solutions that you can use to get your printer up and running again. We'll cover the most common problems and provide step-by-step instructions for fixing each one.

Wrapping It Up

Hence, this is how you should set up your HP LaserJet Tank MFP-2604sdw printer. We hope you have explored the functionality of your printer in the best way possible. If you still face any trouble, connect with us using the Toll-Free button on this page. Our technical experts will reach you and get things done in minutes.

printer setup support