HP Laserjet MFP M634z Setup

HP LaserJet MFP M634z is an all-in-one monochrome multifunction printer. This HP printer performs printing, scanning, fax, and copy functions with utter ease. With the improved toner technology and the innovative design, the printer has a print speed of up to 55 pages per minute. It has the 1,000 sheet bin and the embedded Wi-Fi direct feature for the wireless connectivity. Read below for HP Laserjet MFP M634z setup.

You must now set up the HP LaserJet MFP M634z printer. Unbox the carton box and you will find the following:

  1. HP LaserJet MFP M634z printer
  2. Power cord
  3. Black HP toner cartridge
  4. Installation manual and the User manual
  5. Place the printer in one secluded location that can be within the proximity range of the router.
  6. Remove the protective tapes surrounding the printer and keep it aside.
  7. Press the open button seen on the right side of the printer to open the front door.
  8. Pull out the cartridge cover, use the handle to hold it, and gently place it down.
  9. Remove the HP black ink toner cartridge from the sealed packaging.
  10. Hold either side of the cartridge and shake it to distribute the toner evenly.
  11. Place the toner into the cartridge cover.
  12. Close the front door of the HP printer.
HP Laserjet MFP M634z Setup
  1. Pull out the paper tray from the printer.
  2. Move the paper guides to the extreme corners of the paper tray.
  3. Insert a stack of paper into the paper tray.
  4. Slide the paper guides to the edges of the paper and make sure it does not hold the paper tightly as it may lead to paper jams during a print job.
  5. Take the power cord from the sealed packaging and connect it between the HP Laserjet MFP M634z setup and a power source.
  6. Press the power button located on the printer to turn it on.

HP Laserjet Mfp M634z Driver Download 

Driver for HP Laserjet MFP M634z Printer
  1. Open a web browser on your computer and enter the Official HP Support website URL in the address bar. Then hit the Enter button.
  2. The page will redirect to the HP support page.
  3. You will see a search box on the page where you must enter the printer model number.
  4. On the left side of the next window, you will have few options.
  5. Select the Softwares, drivers & firmware option.
  6. Select the operating system. Now, locate the driver to be downloaded and click on the driver to download it to your computer.
  7. After downloading the driver, run the installer and follow the onscreen commands to proceed with the driver installation to set up your HP printer.

HP Laserjet Mfp M634z Manual Download

User Manual for HP Laserjet MFP M634z Printer

Though the ,HP Laserjet MFP M634z setup comes with the user manual and the installation manual, you have the option of downloading the manuals from the HP Support page.

  1. Open a web browser, enter the Official HP Support website URL in the address bar, and hit the Enter button.
  2. The page will redirect to the HP support page.
  3. You will see a search box on the page where you must enter the printer model number.
  4. The page will display a set of options for your printer.
  5. On the left side of the window, select the Manuals option.
  6. Click on the manual of your choice. The PDF format of the manual will open in a new tab.
  7. Wait for the manual to load. 
  8. On the top right side of the manual screen, locate and click the Download icon.
  9. The manual will be downloaded to the computer.

HP Laserjet Mfp M634z Driver Installation

  1. Once you have the HP printer driver downloaded to your computer, you can proceed with the installation.
  2. Double-click on the downloaded driver file.
  3. The HP driver installation will now start.
  1. Click the I Agree checkbox to accept the Terms and conditions.
  2. Follow the onscreen instructions and make sure to select the connection type when prompted.
  3. The driver will be installed on your computer.

  HP Laserjet Mfp M634z Wireless Setup

  1. Make sure that there are no interference between the router and any other devices.
  2. You have to ensure that your computer is connected to the same network you will be setting up your HP Laserjet MFP M634z setup.
  3. Place the printer within the proximity range of the router so you can avoid any disconnection problems.
  4. Turn on your printer after seeing all the steps mentioned above.
  5. You can use the wireless setup wizard from the printer control panel to set up the printer over a wireless network.
  1. From the control panel, locate the Wireless button, select the Wi-Fi settings, and press the OK option.
  2. Select the Wizard and press OK.
  3. The printer will search for available networks.
  4. Select your router and enter the password from the control panel.
  5. The HP laser printer will be connected to the Wi-Fi.
  6. After connecting the printer to the wireless network, install the printer software on the computer.
  7. Make sure to select wireless as the connection type.

HP Laserjet Mfp M634z Scanner Driver Download

  1. You can download the HP LaserJet MFP M634z scanner driver from the official HP support page.
  2. Open a web browser and enter the official HP Support website URL in the address bar.
  3. Enter your printer model and navigate to your printer’s page.
  4. Select the Softwares, drivers & firmware option.
  5. Select the type of operating system, the driver required to download, and click the Enter button.
  6. Locate and click the Scanner driver you want to download to your computer.
  7. Click the Download button located right next to it.
  8. The Scanner driver will be downloaded to your computer.

HP Laserjet Mfp M634z Toner Replacement

  1. If you find out that the toner cartridge is low, you will have to replace it. Follow the steps to do the replacement.
  2. Press the open button and open the front door.
  3. Gently pull out the cartridge drawer from the HP Laserjet MFP M634z setup.
  4. Hold the cartridge drawer by the handle and pull out the existing Toner cartridge.
  5. Remove the new Toner cartridge from the sealed packaging 
  6. Hold the edges of the cartridge and shake it to distribute the toner evenly.
  7. Place the toner into the cartridge cover.
  8. Hold the handle of the cartridge cover and gently place it inside the printer.
  9. Close the front door of the HP printer.

HP Laserjet MFP M634z Setup Troubleshooting

Most of the HP printers malfunction due to certain errors. There are troubleshooting steps to get the issues resolved. Some common issues are:

  1. Paper Jam
  2. Printer Offline

The troubleshooting steps to fix these issues are given in the following sections. Also, get in touch with our technical experts to fix other printer issues swiftly. For this, click the Call button available on this page.

HP Laserjet Mfp M634z Troubleshooting

HP Laserjet Mfp M634z Offline Guide

There are times when your printer would go offline. The reason might be because of too many pending print jobs.

  1. You have to delete the print jobs in the HP driver that is installed on your computer.
  2. Follow the steps to bring the printer back online manually.
  3. Go to the Windows icon on the bottom left corner of your screen.
  4. Click the Control Panel option and then click the Devices & Printers option.
  5. Right, click the printer with the question that says, 'See what's printing?'.
  6. Click the Printer menu.
  7. Deselect the option Use Printer Offline.

HP Laserjet Mfp M634z Paper Jam Error

The paper jam errors are the most common errors that can occur on any printer. The paper jams have their own set on error code.

  1. The Document feeder, Error code- 31.13
  2. The Duplex and fuser (side panel of the HP Laserjet MFP M634z setup), Error Code- 13.C, 13.D, 13.B
  3. Tray 1 (top of the printer), Error Code- 13.A1
  4. Output Bin, Error Code- 13.E1
  5. 2,000 sheet Feeder, Error Code- 13.A, 13.F
  6. Trays 2-5, Error Code- 13.A2, 13.A3, 13.A4, 13.A5
  7. Locate the area where the paper jam has occurred.
  8. Gently remove the jammed paper. Also, remove the fragments stuck inside the trays and other slots of the printer.
printer setup support