HP Laserjet MFP M634h Setup

Perform HP Laserjet MFP M634h setup using the below-mentioned steps and then do the printer operations.

Unbox the Printer

  1. Take out the HP printer from the carton and place it on a stable surface having ample space to open the tray freely.
  2. Check for other printer accessories inside the box and keep them safe for later use.
  3. Now, remove all the packaging tapes and protective materials from the printer.
  4. After that, press the cartridge access door release button to open the door and remove the protective objects and materials from inside.
HP Laserjet MFP M634h Setup

Install the Ink Cartridge

  1. Hold the cartridge drawer and slide it out from the printer.
  2. Unpack the toner cartridge and gently shake it to distribute the toner evenly.
  3. Remove the protective cover from the cartridge.
  4. Place the cartridge in the drawer and slowly push the drawer inside the printer.

Feed Paper in Tray-2

  1. Draw out the tray and take off all the protective tapes and objects from it.
  2. Move the paper guides to the edge of the tray and then arrange the paper such that the print face is on top.
  3. Place the paper in the tray and shift the paper guides towards the paper. However, see that you do not cripple or bend the paper.
  4. Once done, close the tray.

Connect Network Cable  

  1. If you are planning to use the wireless network or USB cable to connect the printer with the other devices, skip this step.
  2. Connect an Ethernet cable between the HP Laserjet MFP M634h setup and the router’s LAN port.

Power Connection

  1. Connect the power cord provided with the printer to the printer’s supply port and plug the other end to an electrical wall socket.
  2. Next, press the power button located on the front panel of the printer to turn it on.
  3. Wait until the printer display panel turns on and then configure the basic settings such as language, date/time format, and time zone.

Verify the Printer Connection

  1. After all the HP LaserJet MFP M634H settings have been set up, tap the Reports menu and choose Configuration/Status Pages.
  2. Tap Print to print the configuration report.

Software Istallation.

  1. When the physical setup is complete, go on to install the printer software on the computer for easy management of the printer.

HP Laserjet MFP M634h Driver Download

Driver for HP Laserjet MFP M634h Printer
  1. The printer driver is provided to you on the installation CD and is also available online, which you can download.
  2. Open a web browser and go to the official HP website.
  3. Search for the HP printer model and go to its support page.
  4. You can find the Software, Drivers and Firmware tab on the left end of the page. Click it to proceed with the driver download process.
  5. Click ‘Choose a different OS’ and select the appropriate Operating System and Version.
  6. Select the driver which you wish to download and proceed to download it on the system.

HP Laserjet MFP M634h Manual Download

User Manual for HP Laserjet MFP M634h Setup
  1. The HP Laserjet MFP M634h setup manual booklets are provided during the purchase, but if you lose any of those, you can still access them from the manufacturer’s website.
  2. Visit the official HP support site from a web browser.
  3. Find your HP printer model using the search bar and select it to open the support page.
  4. Select the Manuals tab. This will show you all the manuals available for the printer.
  5. Click the download link of the manual and save it on your desktop.

HP Laserjet MFP M634h Driver Installation

Driver Installation on Windows

  1. The printer driver is accessible in two ways: the printer installation CD and the official HP website.
  2. If you are using the CD, insert it into the CD drive on the computer, open the CD/DVD directory, and double-click the installer file.
  3. Otherwise, download the printer driver to the system and open it to start the installation.
  1. If the User Account Control box pops up, click Yes or Allow to proceed with the installation.
  2. Follow the guided instructions on the screen to complete the printer driver installation.
  3. Make sure to select the connection type in the setup wizard.

HP Laserjet Mfp M634h Wireless Setup

Wi-Fi Direct Setup

  1. Turn on the printer and enable the Wi-Fi Direct feature on the printer’s control panel.
  2. In the home screen, tap the information icon and select the Wireless Direct menu.
  3. Following that, you can view the Wireless Direct Name and Password. Note them down. 
  4. Or else print the Wireless Direct information by selecting the Print menu.
  1. After that, turn on the Wi-Fi menu on your device and wait until it detects the printer’s Wi-Fi Direct network.
  2. Select the Wi-Fi Direct name, enter the password, and select Connect.
  3. Click the Connected tab and check if the system could detect the printer driver.
  4. Choose your HP printer model and continue to operate.

HP Laserjet MFP M634h Scan Function Assistant

HP Laserjet Mfp M634h Scan Setup

  1. Make sure to install the scanner software on the computer and keep the HP Laserjet MFP M634h setup turned on during the entire process.
  2. The scanner driver is available on the HP website, and you can download it from the printer model’s support page.
  3. Open the scanner assembly of the printer, place the document on the scanner glass and lower the assembly.
  4. Launch the HP Printer Assistant on the computer and select the Scan tab.
  5. Click Scan a Document or Photo, make the necessary settings, and select Scan to begin the scan.

HP Laserjet Mfp M634h Scan To Computer

  1. When you want to scan a document to your computer, install the scan driver on the computer.
  2. Connect the printer and computer over the same network.
  3. Place the document in the document feeder and move to the computer.
  4. Open the HP Print Assistant, configure the scan settings in the Scan panel, and set the destination location on the computer. 
  5. Finally, proceed to scan.

HP Laserjet Mfp M634h Scan To Email Setup

  1. Turn on the printer and connect it to a computer over a wireless or wired network.
  2. Open a web browser and enter the printer’s LAN IP address to access the EWS.
  3. Next, click the Networking tab and select TCP/IP Settings from the left navigation pane.
  4. Go to the Network Identification panel in the TCP/IP Settings window.
  5. If the page prompts to enter the username or password to access the Network Identification of EWS, enter it.
  6. Enter the DNS details under TCP/IP Domain Suffix if required, and then click Apply.
  7. Select OK and click the Scan/Digital Send tab.
  8. On the left pane, select ‘Email and Scan to Network folder Quick Setup Wizards’ and then click the Email Setup link.
  1. Under Email Setup, select Configure Email Server and configure the SMTP server settings.
  2. After that, set the From, Subject, and Message fields under Configure Email Settings.
  3. Select Configure File Scan Settings, make the necessary settings, and click OK.
  4. Once the setup is complete, review the settings under Summary and click Finish.
  5. Now, tap the Scan menu on the printer’s home screen and select Scan to Email.
  6. Following that, enter the recipient address manually or choose from the Contact list.
  7. Configure the other email and scan settings and finally tap Send.

HP Laserjet MFP M634h Scan To Folder

  1. The HP Laserjet MFP M634h setup and the destination device must be connected to the same network.
  2. Place the document on the scanner glass or load it in the document feeder.
  3. On the printer’s control panel, select Scan and then select the Scan to Network Folder option.
  4. Select the folder or type the folder path on the destination system. Following that, enter a name for the file and configure the scan settings.
  5. If required, preview the file and select Send.
HP Laserjet Mfp M634h Scan To Folder

HP Laserjet MFP M634h Setup Troubleshooting Guidance

The common problems that the HP printer used to face are print, print quality, paper feed, paper jam, and network connection failure. Refer to the printer manual to troubleshoot the simple problems. Otherwise, you can contact our technical team for support.

HP Laserjet Mfp M634h Offline Solution

When the HP printer is connected to the network and still goes offline, then try out the below solutions to bring the printer online.

  1. Verify the printer network cable and power cord connections. If they are loose, the printer can go offline.
  2. Open the Settings window on your Windows computer, select the printer model and check the printing status in the Printer panel. If the Use Printer Offline option is enabled, then untick to disable it.
  3. Install and run the ‘HP Print and Scan Doctor’ program on your computer to troubleshoot the printer problems.

HP Laserjet Mfp M634h Paper Feed Problem

If the HP Laserjet MFP M634h setup rollers do not pick the paper fed in the paper tray, consider the below solutions.

  1. See that the paper level in the tray is below the maximum level indicator.
  2. When the paper guides are too tight, the rollers cannot pick up the paper. So adjust the paper guides.
  3. Make sure the paper fed is not folded or crippled.
  4. The paper jams or small pieces of paper in the printer can cause trouble, therefore remove it.

HP Laserjet Mfp M634h Paper Jam

Clear paper jams in the tray-2 by using the below steps.

  1. Draw out the tray completely from the printer and take off the paper that is crippled or folded.
  2. After that, remove the paper jammed in the feed rollers and place the tray back in the printer.
  3. Now, open the right door of the HP Laserjet MFP M634h setup and remove even the small fragments of paper stuck inside.
  4. Take out the fuser and check if the paper is clogged. If found, then remove it and place the fuser in the position.
  5. Once done, close the right door.
HP Laserjet Mfp M634h Paper Feed Problem

Copyright © 2020 - 2021 printer-setup.us | All Rights Reserved.

➤