Get Started With The HP Laserjet M140we Setup

Welcome to this HP+ printer setup! Bought a new HP LaserJet M140w printer for your home or office printing needs? Great! This printer is one of the best printers that offer excellent printing, scanning, and copying needs. It is easy to set up and use. However, if you're new to printers, you might see it as daunting. Don't worry. We will ensure that you get the best printing experience with your printer. That's why we've created this comprehensive and easy-to-follow guide. Go ahead and read this article to learn more about the HP LaserJet M140w setup.

HP Laserjet M140we Setup

Table of content

  1. HP Laserjet M140we Setup And Unboxing!
  2. HP Laserjet M140we Wireless Printing with HP+!
  3. HP Smart App!
  4. HP Mobile Printing
  5. Get Ready to Experience the Power of HP+
  6. Get HP Laserjet M140we Ink Instantly!
  7. Print Photos and Documents with HP LaserJet M140we Printer!
  8. Easy Scanning with HP Printer!
  9. Make Copying Easy with Your HP Printer!
  10. Sick of Printer Problems? Easy Troubleshoot Them!

HP Laserjet M140we Setup And Unboxing!

Are you ready to set up your HP+ Printer? Follow these steps to install the printer on your computer or smartphone in no time! Let's get started!

  1. Unbox your printer and place it on a stable, neat surface.
  2. This printer comes with a pre-installed HP 142A black laserjet toner cartridge.
  3. However, for printing, you need to remove the packing materials from it.
  4. Open your printer's toner access door and remove the toner cartridge.
  5. Take out the orange clips from the toner.
  6. The Orange Clips From The Toner
  7. Then, while holding the cartridge by its sides, rock it five to six times from side to side. Now, remove the orange tab completely from the toner.
  8. After that, install the toner back into the printer and close the access door.
  9. Load your printer's input tray with a stack of plain white paper, making sure to use the recommended paper type and not exceed the maximum limit.
  1. Remember to open the output tray and extension once you finish loading the input tray.
  2. Now, switch on the printer by plugging it into a working outlet and pressing the power button.
  3. Pressing The Power Button
  4. Within a few seconds, the printer will be ready to go.
  5. Finally, install the HP Smart app to set up your printer on your device (computer or smartphone). Keep reading for further instructions on installing the HP Smart app!

We hope you enjoyed unboxing and setting up your new HP printer! We are sure you are now ready to start printing out documents, photos, and other items. Print away and enjoy your new HP printer!

HP Laserjet M140we Wireless Printing with HP+!

Say goodbye to the hassle of tangled cords and setup headaches. Take the power of wireless printing to the next level by setting up your HP LaserJet M140w printer for wireless communication. By doing so, you can enjoy the convenience of printing from any device and the freedom to print whenever you need. Get started today and experience the power of wireless printing! Read More...

HP Smart App!

The HP Smart app is your one-stop shop for managing your HP printer. Whether you're using the latest PC or laptop, the HP Smart app from HP makes it easy to control and monitor your printer. Plus, you can use the app to troubleshoot any issues and access helpful resources. So, what are you waiting for? Get started today and take control of your printer with HP Smart. Installing the HP Smart app is easy as pie.

  1. Open a new browser on your computer or a new tab in the existing browser.
  2. Type "HP Smart app download" in the browser's URL or search field and tap Enter.
  3. Now, the webpage with a list of links that offer the HP Smart app download will open.
  4. Click on the official HP page from the list of search results.
  5. Now, if we are right, the screen that looks like the one below must have opened on your computer.
  6. Install the app from the Mac App Store or Microsoft Store by tapping the "Download on the Mac App Store" or "Get it from Microsoft" button.
  7. Go to your printer's official software and driver download page.
  8. Choose your computer's OS version from the drop-down menu provided if necessary.
  9. After that, expand the All Drivers section. Locate and select the HP Smart app.
  1. Click Install under the HP Smart app section.
  2. Now, the app will start installing on your computer.
  3. In addition, click the button below to install the HP Smart app in no time.
Get It From Microsoft Button

Alternatively, you can install this app from the HP LaserJet M140w printer's official software and driver download page.

Driver Download For Windows
Driver Download For Mac

Have you installed the HP Smart app on your computer? Perfect! You now have access to all the features of the app. Enjoy the convenience of having all these features at your fingertips!

HP Mobile Printing

Get the freedom to print from anywhere with HP Mobile Printing. Whether at home, school, or on the go, you can easily print documents, photos, and more with just a few taps. Get started now and print from anywhere! We will see how to set up and use the HP LaserJet M140w printer's mobile printing feature using the HP Smart app.

  1. First, install the HP Smart app on your device. (We have already discussed how to install this app on your computer. Refer to them for further details).
  2. To install this app on your smartphone, visit the Google Play Store or App Store.
  3. Next, open the app. Now, what do you see?
  4. If you see the message "Add your first printer" with the Add Printer button instead of your printer name, it means you want to add the printer to the app.
  5. Click or tap the Add Printer button to set up your printer.
  6. Once you have done the setup, you can start printing a photo or document you want by tapping or clicking the Print Documents or Print Photos button.
Tap The Add Printer Button

It's that easy and fast! Give it a try now! Thank you for following our guide to setting up HP mobile printing. We hope it has been a helpful resource for you. May all your printing endeavors be successful!

Get Ready To Experience The Power Of HP+

HP+ is here to help you take control of your digital life. With HP+, you can customize your device settings to maximize performance, increase battery life, and much more. HP+ also gives you exclusive offers, discounts, and more. So, get started with HP+ now and unlock the power of your device!

  1. The Connected Printing Services screen will appear after you connect and install the HP LaserJet printer to Wi-Fi using the HP Smart app.
  2. If you're on the same screen, click the Accept All button to begin the HP+ activation process.
  3. Scroll down the "Thank you for choosing HP+" screen and tap Continue.
  4. The pop-up dialog box will open, as shown in the image below. Tap "Confirm" on it.
  5. You must sign in or up for your HP account and verify it to complete the activation process.
  6. You can do them by following the instructions on the screen.
  7. Once the HP+ activation is done, the "Welcome to HP+ screen" will open.
The Pop-up Dialog Box Will Open

We hope the instructions above have helped you understand the process of activating HP+.

Get HP Laserjet M140we Ink Instantly!

Print smarter with the Instant Ink subscription! Through Instant Ink, you'll never run out of ink again and can get the ink you need when you need it. So sign up today and get ink delivered to your door!

  1. Once you activate HP+, the "Redeem 6 FREE months of HP Instant Ink" screen will open; click "Continue."
  2. Tap or click "View Plans" to view the Ink subscription plans in detail.
  3. Choose the HP's instant ink plan that works best for your printer and complete the billing and payment process to enroll successfully for an Instant Ink subscription.

And that's it! Now you're ready to take advantage of HP Instant Ink.

Instant Ink Subscription

Print Photos And Documents With HP Laserjet M140we Printer!

This HP+ printer comes with cool features, making printing a photo or document a piece of cake. You can have professional-looking prints in no time, so get printing and show off your photos and documents pridefully!

The Configured Print Settings
  1. Start by opening the photo or document you want to print in an application that supports the print function.
  2. Then, open the Print dialog box from the File menu or by clicking the Print button.
  3. Ensure the selected printer is the HP LaserJet M140we.
  4. Customize the print settings, such as the number of print copies, duplex printing, and print resolution, to your liking.
  5. Finally, click Print, and you're good to go!
  6. The printer will print your selected original with the configured print settings.

We hope you enjoyed the ease and convenience of using your HP LaserJet printer to print your photos and documents.

Easy Scanning With The HP Printer!

Searching for a fast and reliable way to scan an original with your HP LaserJet M140w printer? If so, fortunately, you are in the right section. This printer's intuitive scanning software and the HP Smart app make scanning any document easy and efficient. Here, we will help you learn how to scan an original using the HP Easy Scan software with your HP+ printer. So, are you reading? Let's get started!

  1. Open the HP Easy Scan software on your Mac computer. Need help? Well, you can open this software from your computer's Applications folder.
  2. Verify the selected scanner's name. If it is not the HP LaserJet M140w, select it manually from the Scanner drop-down menu.
  3. After that, choose the scan type that you wish to perform from the Presets drop-down menu.
  4. Choose The Scan Type
  1. Now, load the original you want to scan on the scanner glass.
  2. The preview of the original image will display on the software screen.
  3. If you want to adjust the scan settings, then select the Edit Settings option from the Presets drop-down menu and do them.
  4. When you're ready, click Scan, and the printer will start scanning the original.
  5. Once it's done, a thumbnail of the scanned copy will show up.
  6. If you want to keep scanning, click Scan Next Item.
  7. Otherwise, click Done to save the scanned copy to your computer.

Scanning documents with the HP Easy Scan software is a great way to digitize your documents. Give it a try if you haven't used it before.

Make Copying Easy With Your HP Printer!

Copying documents can be a time-consuming and frustrating task, but with this HP printer, it can be quick and simple! Learn how to copy documents with your HP printer in a few simple steps.

  1. Open the printer's scanner glass.
  2. Place the original you want to copy on the glass.
  3. Make sure the original is placed with the side you want to copy facing down.
  4. Now, press the Copy Options button if you're copying a normal document.
  5. Set the copy settings as per your liking.
  6. Select the Start Copy/Resume option.
  7. If you're looking to create a copy of an ID card, press the ID card button after placing the ID card on the scanner glass.
  8. Now, the printer will copy one side of the card. Once it is done, the attention light blinks.
  9. Now, remove and place the second side of the ID card, and press the ID Copy button again.
  10. Finally, the printer prints the page with a copy of both sides of the document or ID card.
Press The Copy Options Button

With these easy steps, you'll be a pro at copying documents with your HP LaserJet M140w printer in no time at all! So, make the most of your HP printer and get copying!

Sick Of Printer Problems? Easily Troubleshoot Them!

Are you tired of dealing with printer problems? Don't let printer troubleshooting be a source of stress! Here, we will provide you with easy-to-follow tips and tricks to help you troubleshoot your printer problems easily. Read More...

Conclusion

We hope that this article helped you learn how to perform HP Laserjet M140we setup on a computer or smartphone over a wireless network and troubleshoot the most common printer problems. Give us a call now if you want to learn more or want real-time assistance in performing the setup.

printer setup support