HP Tango Terra Printer Setup

1. Unpack the HP Tango Terra Printer 
2. After that, using the power cord, connect your HP printer to the electrical outlet.
3. Open the input tray of your HP Tango printer.
4. Place a stack of plain papers in the input tray.
5. Make sure to expand the output tray.
6. After that, unpack the ink cartridges.
7. Open the ink cartridge access door of the printer.
8. Locate the ink cartridges slots.
9. Place the unpacked ink cartridges in the respective
10. After inserting the ink cartridges, close the cartridge access door.
11. Now,your HP Tango Terra printer will print the alignment page.
12. After that, connect your HP printer to the wireless network by installing the HP Smart app on your Windows, Mac, Android, or iOS device.
13. Otherwise, use the Wireless Protected Setup option to perform the wireless connectivity.

To connect your HP Tango Terra printer setup to the wireless network using the WPS method, follow the instructions given below.

1. Switch on your wireless router and the HP printer.
2. Locate and hold down the Wireless and Power button for at least 3 seconds.
3. Now,the WPS setup mode is enabled on your HP printer.
4. The long bar will lights in blue at each edge of the printer.
5. Now, press the WPS button on your wireless router within two minutes.
6. After connecting your HP printer to the wireless network, connect the computer to the same Wi-Fi connection,and try a test print.

HP Tango Terra Driver Download

For Windows Devices

For Mac Devices

HP Tango Terra Driver for Windows

HP Easy Start Printer Setup Software, HP Smart app, HP Tango series Firmware Update, HP Tango/ Tango X Print, and Scan Driver and Accessories, and HP Easy Start Printer Setup Software are the print driver files developed by HP for HP Tango Terra printer setup. 

1. First, download the driver file you wish to install on your Windows computer from the official site of the HP printer.
2. Using the HP Smart app,you can perform printer-related operations from your Windows computer to the HP Tango printer.
3. Visit the official site of the HP printer.
4. Navigate to your HP printer support page by performing the prompts displayed on the screen.
5. On the support page, click the Software, Driver, and Firmware 
6. Follow the on-screen instructions to complete the driver file download process.
7. Once the driver file download process is completed, open it and begin the HP Tango printer driver installation on your Windows computer.

HP Tango Terra Driver for Mac

HP Smart app and HP Tango series Firmware Update are the driver files available for the macOS device. Perform the quick steps given below to install the HP Smart driver on your macOS computer.

1. Open the Safari web browser on your Mac computer.
2. Navigate to the HP printer’s official site.
3. Search for the HP Tango Terra printer and select it.
4. Click the Software, Driver, and Firmware 
5. Choose your Mac OS and its version from the drop-down menu lists.
6. Click the Download button in the All Drivers 
7. After the download process, launch the HP Smart 
8. Make sure to connect your HP printer and the Mac computer to the same wireless network.
9. On the HP Smart application screen, click the Printers option followed by Set Up a New Printer.
10. Finish the driver installation by following the instructions displayed on the screen.

HP Tango Terra Driver for Android

1. For Android devices, the HP Smart application needs to be installed to perform the HP Tango Terra printer setup functions remotely. 
2. You can get this application from the HP printer’s official site or the Google Play Store 
3. To install the HP Smart application and connect your HP Tango Terra printer to the Android device, follow the instructions given below.
4. Before performing the installation, connect your HP Tango printer and the Android device to the same wireless network.
5. Turn on the Bluetooth option on your Android device.
6. Launch the Google Play Store application on your Android device.
7. Search for the HP Smart 
8. Tap the Install button followed by 
9. Once the HP Smart application is installed, launch it on your Android device.
10. Follow the on-screen prompts to complete the driver installation process.
11. Finally, try a test print.

1. First, connect your iPad, iPhone, or iPod device to the same wireless network to which your HP printer is connected.
2. Enable the Bluetooth option on your iOS device.
3. Now, on your iPad, iPhone, or iPod Touch device, launch the App Store 
4. Tap in the search field.
5. Type the HP Smart keyword in the search field.
6. Now, based on the keyword input, a list of suggestions will appear on the screen.
7. From the suggestions, select the HP Smart 
8. Tap the GET button followed by 
9. When prompted, sign in to your iTunes account using the correct

10. Wait for the HP Smart application to install.
11. Once it is done, launch it and perform the instructions discussed below.
12. Accept the user license agreement displayed on the screen.
13. Tap the Start button followed by Plus sign.
14. Select the Set Up a New Printer 
15. Choose your HP printer from the list.
16. Once your HP printer is installed on your iOS device, try performing a test print operation.

Fixed: HP Tango Terra Paper Jam Error

1. The paper jam issue is one of the common problemsoccurring in most of the printers. This can be resolved by carefully removing the jammed paper from the printer.
2. Paper jamsmight occur in your HP Tango printer’s input tray, output tray, or ink cartridge access area.

Steps to clear the paper jam issue in the input tray of the HP Tango Terra printer setup

1. First, take all the papers in the input tray of your HP printer.
2. After removing the papers, search for any foreign particles in the input tray.
3. If you find any, remove them and then re-load the papers in the input tray.
4. Make sure to load clean and plain papers in the input tray of the printer.
5. Avoid overloading the papers into the input tray.
6. After placing the papers correctly, press the Cancel buttons on your HP printer’s control panel.

Steps to remove the jammed paper from the output tray of the HP printer

1. Check for the foreign particle or a small piece of paper in the output tray of the printer.
2. If it is present, gently remove it.
3. Avoid tearing the jammed paper while removing it.
4. Similarly, open the ink cartridge access door and check for the jammed paper.
5. Slowly, remove the jammed paper if present.

Solved: HP Tango Terra Offline Issue

The HP Tango Terra printer offline error is a common problem faced by most of the printer users. You can solve the printer offline issue easily by performing the simple troubleshooting instructions instructed below.

1. First, check if your HP Tango Terra printer is turned ON.
2. After that, connect the HP Tango Terra printer and your computer to the same wireless network.
3. Restart your HP printer and the computer.
4. Check if your HP printer is set as the default printing source on your Windows computer.
5. To set your HP printer as the default printer, read and proceed with the instructions given below.
6. Navigate to your Windows computer’s Printers & scanners 
7. Locate the Let Window manage my default printer option by deselecting the checkbox beside it.
8. Now, choose your HP Tango printer from the list of printers.
9. Click the Manage
10. Go to the Manage your device section and click the Set as default 
11. Now, try to print.If the test page prints, the printer offline issue has been
12. If not, connect your Windows computer to a TCP/IP port and then perform the print operation.
13. On the Printers & Scanners screen, select your HP printer.
14. Click Manage > Printer Properties > Ports > Add Port.
15. In the Printer Ports dialog box, select the Standard TCP/IP Port 
16. Click the New Port… 
17. Enter your HP printer’s IP address in the given field.
18. Click the Next 
19. Perform the on-screen instructions to complete the process.
20. If the HP printer offline issue persists, contact us to solve it.

HP Tango Terra Printer Out of Paper Error Solution

If you load ripped, dusty, curled, wrinkled, or bent papers into your HP Tango Terra printer, then there is a chance for the error out of paper to occur.

1. First, check the paper type you are loading.
2. Ensure to load clean and plain papers into the input tray of the printer.
3. After loading the clean papers, press the Resume button on your HP Tango printer’s control panel.
4. Check if the error out of paper is solved.
5. If not, reset your HP Tango Terra printer setup by following the instructions given below.
6. Switch on your HP printer.
7. Now, unplug the power cable from the HP printer while it is powered ON.
8. Leave the HP printer disconnected from the power source for 60 seconds.
9. Then, reconnect the Power cable into the HP printer and turn it ON.
10. Set the printer configuration as per the instructions.
11. Now, check if the error out of paper is solved.
12. If not, it might appear due to the printer’s hardware issue.
13. To solve the HP printer’s hardware issue, contact your dealer and service it.

HP Tango Terra Priner not found During Driver Setup

Perform the troubleshooting instructions given below will help you in solving the printer not found during the driver setup process on the Windows computer.

1. As soon as this error message is displayed, close the installation wizard and re-perform the driver installation.
2. Make sure that the HP Tango Terra printer setup and your computer are connected to the same wireless network.
3. If it does not solve the issue, run the HP Print & Scan Doctor application on your Windows computer.
4. Download the HP Print & Scan Doctor application from the HP printer’s official site.
5. After downloading, install it as per the instructions.
6. Launch the HP Print & Scan Doctor 
7. Follow the instructions displayed on the screen to solve the issue.
8. If the printer not found during the driver setup issue persists, uninstall and reinstall the HP driver and software on your Windows computer.
9. If the issue persists, you can contact us by clicking the call button available on the site.