HP Smart Tank 7602 Setup All In One Guide

Home »
HP Printers »
HP Smart Tank 7602 Setup

Table of content

UNBOXING & SETUP INSTRUCTIONS

Your HP Smart Tank 7602 printer comes in a box with all the necessary cables and power cords to set it up. You need to unpack it, plug it into an outlet, and turn it on. These instructions will give the right insights into the procedure.

Unpack The Printer

Open the product package and take out each item you have received.
The package contains the HP Smart Tank 7602 Printer, Ink Bottles, Power Cord, and Quick Setup Guide.
Discard all packing materials from the printer and its accessories.
Plug the power cord you received into the printer's power port and a power outlet.
Turn on your HP Smart Tank 7602 by pressing the Power button.
The power LED should now light up.

Completing Setup With HP Smart

At this point, you can set up your printer using HP Smart.
Just visit HP's official website and download the HP Smart app.
Follow the instructions on the screen to install it on your computer.
The app guides you through the animations of connecting your printer to Wi-Fi, filling the tank, installing the printhead, loading paper, and aligning the printhead.
Install the app to complete the setup, or read the section below to set up the printer manually.

Fill The Ink Tanks

Unpack one of the included ink bottles and remove the cap.
Open the ink access door and open the tank cover.
Open the ink tank cap and align the ink bottle with the ink inlet.
Remove the bottle from the filling port when the ink tank becomes full.
Repeat this process for all the ink tanks.
Finally, close the ink tank caps, tank covers, and ink access door.
Store leftover ink in a cool, dry place.

Install The Printhead

The printer control panel will prompt you to install the printheads when the ink tanks are full. By then, follow the steps below to install the printheads.

Raise the ink access door.
Wait for the carriage to reach the center, and stop moving.
Press the blue button in order to open the printhead cover.
Take the included printhead and carefully remove the orange protector, cap, and protective tape.
Insert the printheads into their respective holders and wait until they click into place.
Finally, close the printhead cover and ink access door.

Load paper

Extend the paper tray.
Move the guides to the extreme corners.
Take a stack of paper and place it print-side down in the paper tray.
Align the guides with the paper and reinsert the paper tray into the printer.

Print And Scan The Alignment Page

After loading the paper, the printer prints a printhead alignment page.
Take it out and place it print-side down on the scanner glass.
The printer will now start scanning the alignment page.

Connecting Your Printer to Computer - Software Setup

Setting up a new HP printer can be a daunting task for some, especially if it is the first time you are doing so. Fortunately, we are here to assist you. We have also provided the driver download options for a few operating systems. The next sections will guide you through the process, from downloading the necessary software to connecting your printer to a computer or network.

HP Smart Tank 7602 Driver Download

Drivers are very important to your computer because they help control your printer and make sure it works properly. Without the correct printer driver, you may not be able to print anything, or the printer may not function properly. When you install a new printer, you need to download the correct driver from the manufacturer's website. In case you are searching for an option to skip through this procedure, just click the Driver Download button given on this page. Once it is downloaded to your computer, you can proceed with the installation.

HP Smart Tank 7602 Driver Install

Locate the downloaded file and give a double-click on it.This will open the HP Smart app.

If User Account Control appears, click Yes to continue.

In case you are using Mac, you need to provide its administrator credentials.

Accept the terms and conditions when the software’s License Agreement screen appears. Select the option to add a new printer.

When asked to select a connection type, pick the option you prefer and connect your printer and computer accordingly.

Go ahead with the on-screen instructions and complete the setup.

Download HP Smart Tank 7602 Manual

Printer manuals are important because they provide the necessary information that is required to carry out a task using the printer. They are also very helpful when it comes to troubleshooting the printer. It can be a good starting point if you're looking to learn how to do something new with your printer. You can get the manual for the HP Smart Tank printer by clicking the Manual Download button.

How To Connect HP Smart Tank 7602 To Wifi

Wireless printing is a convenient technology that lets you print documents, photos, or other files from your computer wirelessly and without the hassle of cords and tangles. In this section, we have covered the procedure for the HP Smart Tank 7602 printer's Wi-Fi setup.

USB Setup - Make Communication Faster

If you want to connect your HP Smart Tank 7602 printer to your computer via USB, continue reading this section.

First, use your default browser to go to the HP website and download the HP Easy Start software.
Locate the downloaded setup file on your computer and run the setup file.
If User Account Control appears, click the Yes button.
Connect a USB cable to your HP Smart Tank 7602 printer and the computer's USB port.
Agree to the terms and conditions when the software’s License Agreement screen appears.
The installer now displays the printer on the Printer Found screen.
Make sure the correct printer is detected, and click the Continue button.
Select the drivers you want to install on your computer and click the Continue button.
Go ahead with the on-screen instructions and complete the installation.

Mobile Printing Setup

The process of printing using a smartphone is indeed a hassle-free process. You just need to open up a print-enabled app and select the document that you want to print. In this segment, we will show you how you can print your documents from your iOS and Android devices.

On your iOS device, open the document or photo you want to print.
Tap the Share icon and pick the Print option.
On the following screen, choose the required number of copies.
Ensure the right printer is selected in the Printer drop-down menu.
Make the necessary changes to your document and tap the Print option.
Now, your HP printer will start printing your document.

Android - HP Smart

To begin with, open the Play Store and download the HP Smart application.
Open the app and add your HP Smart Tank 7602 printer.
When prompted, sign in or create an HP account.
If prompted, allow Bluetooth and location permissions.
Register your printer by giving the required details.
Once a connection is established between your printer and smartphone, the Wi-Fi light will stop blinking and remain lit.
Now, you can print wirelessly.

Enrolling Instant Ink Subscription

HP Instant Ink is an ink cartridge/bottle replacement service. When you subscribe to this program, you need not purchase replacement cartridges, and HP will deliver them in advance. These instructions will show you how to enroll in this plan.

You need an HP Connected account to enroll in HP Instant Ink.
In case you already have an account, sign in to it by providing the required credentials.
In case you don't have an account, create one.
On the page that appears, click the Instant Ink option.
Click Overview, followed by Enroll a Printer.
Provide the required details, including the shipping address, and complete the enrollment process.

How to Print Photos or Documents from Your HP Printer?

First, turn on your printer and load enough paper into the paper input tray.
Connect the printer and computer via a USB cable or over a wireless network.
On your computer, launch the HP Smart app.
Make sure that your printer is selected.
Click either Print Documents or Print Photos.
Pick your document or photo and select your preferences, such as orientation, paper source, paper type, and print quality settings.
Finally, click OK > Print.

Scanning Photos or Documents

This section describes scanning a photo or document using the HP Smart app. Before starting, verify if you have connected your printer and computer to a wireless network.

To begin with, place the original document on the scanner glass.
Next, open the HP Smart app on your computer.
Select your printer in the HP Smart app if it is not detected automatically.
Click the Scan tile and select Get Started.
Select your scan preferences from the right-side panel of the Scan dialog box.
Preview your document or photo and click Done.
Click Save and select a folder on your computer to save the scanned file.

Copying Documents

Before making copies with the HP Smart Tank 7602 printer, make sure the printer is turned on and has enough paper loaded.
Place the original documents on the scanner glass or into the ADF.
If you place the document on the scanner glass, make sure the document is aligned with the markings.
From the printer home screen, touch the Copy icon.
Make the appropriate changes and tap Copy.

HP Smart Tank 7602 Troubleshooting

Printers are essential for any home or small office. But as with any device, they sometimes have troubleshooting issues. Knowing how to troubleshoot a printer can help you fix any problems you might have. When you reach the end of this section, you will understand more about printer issues and be prepared to fix them yourself.

In A Nutshell

We appreciate you reading our post on the HP Smart Tank 7602 setup, driver installation, and troubleshooting. We hope you were able to find what you were seeking for. Now you have learned how to use your printer to its fullest. Use the Toll-Free button on this page to contact us if you have any queries. We'd be happy to hear from you!

HP Smart Tank 7602 Setup - Complete Guidelines