How To Configure HP Smart Tank 7001 Setup?

HP Smart Tank 7001 is a multifunctional printer that can print, scan, and copy. It is a cartridge-free printer so that you don’t need to spend a huge amount of money to buy the cartridges. The HP Smart Tank 7001 printer can print 15 pages per minute; so, it can meet all your home and office requirements. With its fascinating Wi-Fi technology, it can keep you connected to your devices. If you want to know the HP smart tank 7001 setup, go on reading the following sections.

HP SMART TANK 7001 UNBOXING SETUP

Unpack your Printer

  1. Unpack the printer and take out everything you received.
  2. Your package includes the HP Smart Tank 7001 printer, ink bottles, printheads, power cord, and a quick setup guide.
  3. Remove all the protective materials and packing tapes from the printer and its components.
  4. Make sure that you have received all the components without any damage.

Connect your Printer to a Power Outlet

  1. Take out the power cord given along with your printer.
  2. Connect the power cord to your printer and an electrical outlet.
  3. Turn on your HP Smart Tank 7001 printer by pressing the Power button.
  4. Now, the Power LED will start to glow up.

Fill the Ink Tanks

  1. Unpack the ink bottles and keep them ready.
  2. Open the ink access door and the tank cover.
  3. Fill the ink tanks with the ink from the bottles; make sure to fill the ink according to the color indications.
  4. Whenever you fill a tank, close it with the respective cap.
  5. Once you have filled all the ink tanks, close the tank cover and the ink access door.

Install the Printheads

  1. Once you have filled the ink tanks, you should install the printheads.
  2. Lift the ink access door and wait until the carriage becomes idle.
  3. Open the printhead cover by pressing the Blue button.
  4. Take out the supplied printheads and remove the orange guards from each printhead.
  5. Insert the printheads into their holders and press them until they snap firmly.
  6. Finally, close the printhead cover and the ink access door. Keep reading to know how to configure HP smart tank 7001 setup.
HP smart tank 7001 setup

Load Paper

  1. Extend the paper tray and slide the guides to the extreme ends.
  2. Take a paper stack and fan the sheets neatly.
  3. Align the edges and load the stack into the paper tray.
  4. Adjust the guides against the paper and insert the paper tray into the printer.
  5. Now, your printer will start printing an alignment page.

Connect your printer and computer

  1. Download the HP Smart application from the official support page of HP.
  2. Install the app on your computer by following the instructions on the screen.
  3. Launch the app and click the Add Printer option.
  4. From the list of printers, choose your HP Smart Tank 7001 printer.
  5. Now, you can start printing wirelessly with HP Smart.

HP SMART TANK 7001 DRIVER DOWNLOAD

  1. Visit the official web page of HP from your default browser.
  2. In the search field, enter HP Smart Tank 7001 and click the Submit button.
  3. When it shows you the search results, choose the correct printer model.
  4. On the product support page, click Software, Drivers and Firmware.
  5. Now, your Operating System will be automatically detected, and it will show you the compatible drivers.
  6. Choose the driver you want and click the Download button next to it.
  7. Once the driver gets downloaded, you can locate the file within the browser or in the Downloads folder and to know HP smart tank 7001 setup.

HP SMART TANK 7001 DRIVER INSTALL

  1. Once the downloading process gets completed, locate the file within the browser or in the Downloads folder.
  2. Double-click the setup file and click Yes in the User Account Control dialog box.
  3. When the License Agreement screen appears, accept the terms and conditions.
  4. When you are asked to choose the connection method, select the method you prefer; then, connect your printer and computer accordingly.
  5. Follow the commands and complete the installation.

HP SMART TANK 7001 WIRELESS SETUP

Wireless technology has transformed the way we look at our devices. To complete the wireless setup on your HP Smart Tank 7001 printer, follow the instructions below:

  1. Download the printer driver from the official support page of HP. You can refer to the previous sections to know the complete procedure for downloading a printer driver. Once your printer driver is downloaded, locate the file in the Downloads folder and run the setup file.
  2. Accept the terms and conditions on the License Agreement screen. Choose your connection method as Wireless and connect your printer to the same network to which your computer is connected.
  3. Follow the commands on the screen and complete the wireless setup.
  4. You can also complete the wireless setup with the HP Smart application.

HP SMART TANK 7001 USB SETUP

  1. Download and install the HP Smart application on your computer.
  2. Connect your HP Smart Tank 7001 printer and your computer via a USB cable.
  3. Launch the HP Smart application and click on the Add Printer option.
  4. When it shows you a list of printers, choose your HP Smart Tank printer.
  5. If you don’t have an HP account, create it and register your printer.
  6. When prompted for a password, enter the respective PIN. You can locate it from a cable in the ink access area while HP smart tank 7001 setup.

HP SMART TANK 7001 PRINT SETUP

  1. Download and install the HP Smart application on your computer.
  2. Open the document/image that you want to print.
  3. Click on the File menu and choose the Print option.
  4. Click Properties and check whether your HP Smart Tank 7001 printer is selected. If you want to make changes to the print settings, make those changes and click OK.
  5. Finally, click the Print button.
  6. Now, your printer will start printing the documents/images you have sent from your computer.

HP SMART TANK 7001 COPY SETUP

  1. Load a paper stack into the paper tray and place the originals in the document feeder with the print side facing up.
  2. In case you are placing the originals on the scanner glass, place them with the printing side facing down.
  3. On your printer control panel, press the Black Copy/Color Copy button.
  4. If you want more copies, press and hold the respective button or press the button several times according to the number of copies you need.
HP SMART TANK 7001 SCAN SETUP

HP SMART TANK 7001 SCAN SETUP

  1. Load the documents into the document feeder or on the scanner glass.
  2. Launch the printer driver on your computer and click Scan > Scan a Document or Photo.
  3. Choose the document type you prefer and click the Scan button.
  4. You can also scan your documents using the HP Smart application while HP smart tank 7001 setup.

HP SMART TANK 7001 TROUBLESHOOTING

A printer may start to malfunction over a period of time. But, the good thing is, you do not require a technician all the time. You can fix the issue on your own when you know the exact troubleshooting technique. In this section, we have listed the common issues that can occur on a printer, along with the best troubleshooting techniques. Continue to read this section and fix your problem on your own.

HP SMART TANK 7001 OFFLINE

  1. A printer may go offline due to several reasons. If your printer goes offline due to an unstable Internet connection, fix the issue first and check whether you can find your printer online.
  2. In most instances, users will unintentionally enable the Use Printer Offline option. To disable it, click Start and go to the Devices and Printers section. Locate and right-click on your HP printer and choose the See what’s printing option. Click the Printer menu and disable the Use Printer Offline option. Now, check whether you can find your printer online.
  3. An outdated printer driver may cause significant issues on your printer, so update the printer driver and then check whether you have resolved the issue.
  4. Power cycle your printer. To do so, just turn off your printer and disconnect the power cord. Wait for a minute and reconnect the power cord. Turn on your printer and check whether you can find your HP printer online. Keep reading to know how to configure HP smart tank 7001 setup.

HP SMART TANK 7001 NOT PRINTING

  1. If your HP Smart Tank 7001 printer is not printing, you need to check whether it is in sleep mode. If so, press any button and wake it up from sleep mode.
  2. If you have connected your printer and computer using a USB cable, check whether the connection is firm enough at both ends. If necessary, change the port and cable.
  3. If you have connected your printer and computer over a network, check whether the network connection is stable enough. If there is no stability on your Internet, fix the issue first. Also, check whether you have connected your printer and computer over the same network.
  4. It is essential to keep your printer as the default one. If not, the printer will not receive the print jobs you send from your computer. To make your HP Smart Tank 7001 printer as the default one, go to the Devices and Printers section, right-click on your printer, and choose the Set as default printer option.
  5. Uninstall the printer driver from your computer. Visit the official support page of HP and download the updated printer driver. Now, install the updated printer driver on your computer by following the instructions on the screen.
  6. When the print jobs get piled up on the printer’s memory, it may fail to respond and print the documents. In that case, it is recommended to cancel the documents from the queue. To do so, go to Devices and Printers, right-click on your printer, and choose the See what’s printing option. Then, click on the Printer tab and choose Cancel All Documents.
  7. Now, check whether your printer is printing.
hp smart tank 7001 paper jam

HP SMART TANK 7001 PAPER JAM

  1. A paper jam can occur anywhere inside the printer. You can resolve the issue by removing the jammed paper from the specific area. Follow the instructions mentioned below to clear the paper jam from your printer.
  2. Extend the input tray followed by the output tray.
  3. Remove the duplex plate and take out all the jammed paper you find inside.
  4. Once you’ve removed all the jammed paper, reinsert the duplex plate, output tray, and input tray.
  5. When there is a paper jam inside the printer, raise the ink access door.
  6. Look inside, and if you find any jammed paper, take it out carefully.
  7. Finally, close the ink access door.
  8. When there is a paper jam at the printer’s back, open the printer’s rear door. Check for the jammed paper and remove it gently. Once you have cleared all the jammed paper, close the printer’s rear door.
  9. If you want to prevent paper jams, make sure to load fanned sheets with aligned edges. Do not load any curled, wrinkled, or damp sheets into the paper tray. Also, make sure not to load the paper beyond the indicated limit. When you take these measures, you can get rid of paper jams to some extent. Finally, know how to configure HP smart tank 7001 setup.
printer setup support