HP Envy 6455e is a multi-function printer. It has an ADF and uses HP Thermal Inkjet technology. This printer comes with a one-year limited hardware warranty. Keep reading this page to know how to configure your HP Envy 6455e printer setup.
The HP Envy 6455e setup includes the hardware setup and the software installation. Both are explained in the following sections.
First, open the printer box.
Next, remove the components, like the power cable and cartridges, from the box.
You can now take the printer out of the box.
Now, set the box on its side. Slide out the printer using the handles.
Remove the printer from its bag.
Remove all the blue tape from around the printer, including the pieces that lead inside it.
Take out the foam sheet from the scanner bed.
You have now finished the initial stage in the HP Envy 6455e printer setup.
Powering on the printer:
First, plug in the printer using the supplied power cable.
You will find that the printer turns on automatically.
You will hear a chime playing. The lighting will now switch over to purple (from blue).
Loading paper into the printer:
Use both hands to slide out the paper tray from the printer.
Now, you need to move the paper guides to their outermost positions.
Fan a stack of paper well while HP Envy 6455e printer setup.
Load the stack into the tray and then adjust the paper guides.
Now, close the tray.
You have now completed another stage in the HP Envy 6455e setup.
Installing the ink cartridges:
Since you are setting up your printer for the very first time, you will find a blinking light at the corner of the printer. This light indicates where to lift the ink cartridge access door.
Now, you can lift the access door.
Remove the setup cartridges from their packages.
From every cartridge, pull the orange tab to remove the protective tape.
Lift the corresponding cartridge lid in the printer.
Now, insert the cartridge and then close the lid.
Repeat the above procedure for the remaining cartridges.
You can now close the access door.
Next, you have to print the Alignment Page.
Place the page on the scanner glass with the print side down.
Finally, touch the blinking Copy button on the printer to finish the alignment process.
You have now completed the hardware part of the printer setup. Once you finish installing the printer software, the entire HP Envy 6455e printer setup will be complete.
HP Envy 6455e Driver Download
If you want to download the driver for the HP Envy 6455e printer, carry out the instructions given below to get HP Envy 6455e printer driver download.
Go to your computer and navigate to the official site of the HP Envy 6455e printer.
You need to click the Software, Drivers and Firmware tab.
Now, your operating system and its version will automatically be detected. In case it is not detected, you have to click on the Choose a different OS link.
On the next page, pick the desired operating system and its version from the drop-down menus for the respective fields. Click on the blue Change button.
You will find that a list of drivers is displayed. Go to the option under the Recommended title and click on the blue Install button at the bottom.
Just follow the rest of the on-screen instructions to finish the driver download for the HP Envy 6455e printer.
HP Envy 6455e Driver Install
In this section, we'll look into the steps to install the driver for your HP Envy 6455e printer. There are two different ways to achieve this task:
First Method: By utilizing the installation CD
Take the CD that comes with your printer package. Now, you need to insert the CD into your computer's CD/DVD drive.
Continue with the remaining on-screen instructions to finish the HP Envy 6455e printer driver installation for your printer.
Second Method: By downloading the driver from the official site
On your computer, navigate to the official site of the HP Envy 6455e printer.
Now, you should download the most appropriate driver for your printer. Ensure that it is the latest version.
Next, navigate to the Downloads folder on the computer. Here, find the driver file.
You should double-click on the file to open it. Now, you just have to continue with the rest of the on-screen instructions to finish the driver installation for the HP Envy 6455e printer.
HP Envy 6455e Wireless Setup
Stage 1: Preparation for the installation
Confirm that the printer is turned on.
Ensure that your computer (or your mobile device) is connected to the same wireless network to which you intend to connect your printer.
Make sure that your computer/mobile device is turned on.
Set up the printer and load paper into the input tray. Next, install all the ink cartridges.
Keep the printer close to the computer and also within range of the router and get configure your HP Envy 6455e printer wireless setup.
Stage 2: Connecting the printer to your wireless network
You can make use of the WPS method or utilize HP Smart to establish a connection between the HP Envy 6455e printer and the network.
You can use Wi-Fi Direct to make a wireless connection if you are using a guest network.
Connecting the printer using WPS:
Turn on your printer.
Locate the WPS button on your router. But, do not press it now.
On the back of your printer, you need to press and hold the Wireless and the Power buttons simultaneously for 3 seconds.
Turn your attention to the router. Press and hold its WPS button for 3 to 5 seconds.
Your printer will stop searching for a WPS connection a couple of minutes after the Wireless button is pressed.
You can be sure that the printer has successfully connected to the wireless network once the purple Wireless light on the printer control panel turns on solid.
You have now successfully finished the HP Envy 6455e printer wireless setup.
HP Envy 6455e Usb Setup
You can easily set up the HP Envy 6455e printer for a USB connection on a Windows computer, a Mac, or a Chromebook.
Setting up a USB printer connection (Windows):
If you have already connected your printer USB cable to your computer, make sure that you disconnect it. Next, remove the printer from the computer.
Go to the Printers & Scanners window on the computer. Choose your printer from the displayed list.
Click on the Remove Device button, followed by the Yes button.
Restart the computer.
Ensure that an open USB port is available on the computer.
Avoid connecting the printer to a docking station or USB hub.
Navigate to the HP Smart-Microsoft Store and then install the HP Smart app from there.
Now, open the app. Just continue with the guided installation steps to finish the USB setup.
You have now completed the HP Envy 6455e USB setup.
HP Envy 6455e Print Setup
You can get prints of excellent quality using the HP Envy 6455e printer. Follow the instructions given here to start printing using a Windows computer after the HP Envy 6455e printer setup.
First, make sure that the paper is loaded into the paper tray.
Next, confirm that the output tray is open.
From the software on your computer, select Print.
Make sure that the HP Envy 6455e printer is chosen.
Now, click on the button that opens up the Properties dialog box.
Select the desired settings and click on the OK button.
To start the printing process, you need to click on the Print button.
You have successfully printed using the HP Envy 6455e printer.
HP Envy 6455e Scan Setup
You can conveniently scan your photos and documents using the HP Envy 6455e printer and send them to a variety of destinations.
Load your original such that the print side is down on the scanner glass.
Open the HP printer software on your computer to get HP Envy 6455e printer scan setup.
In the printer software, navigate to the Print & Scan section. Here, choose the Scan option.
You have to click on the Scan a Document or Photo button.
Under Scan Shortcuts, select the type of scan you want and click on the Scan button.
NOTE: If you are scanning to email, select the Email as PDF or the Email as JPEG option. Now, click on the Scan button.
You have now successfully performed the HP Envy 6455e scan setup.
HP Envy 6455e Copy Setup
To perform the Copy function on the HP Envy 6455e printer, follow these steps:
Make sure that you have loaded paper into the paper tray of the printer.
Load your original document on the printer's scanner glass such that the print side faces down.
Press the Start Copy Black or the Start Copy Color button on the printer.
After two minutes, the copying process will start.
You have successfully copied using the HP Envy 6455e printer.
HP Envy 6455e Troubleshooting
In some situations, you might encounter problems while using the HP Envy 6455e printer. You can resolve many of the issues yourself. However, there are also specific instructions to troubleshoot such problems. In the following sections, we shall see some of the commonly occurring challenges that you will have to face while using the printer and the methods to fix them using the HP Envy 6455e printer troubleshooting steps.
HP Envy 6455e Printer Offline
Printer offline problems are pretty common and can be solved easily. You can make use of the following steps to fix the issues due to which your HP Envy 6455e printer goes offline.
NOTE: The following instructions will apply to a Windows computer that you are using with your HP printer.
On your Windows computer, navigate to the Control Panel window.
Once you are inside the window, click on Devices and Printers.
In the next window, under Printers, locate your HP Envy 6455e printer.
Now, right-click on the printer. From the displayed options, choose See what's printing.
A new dialog box will pop up. Here, click on the Printer menu.
From the options that are displayed, you will notice the Use Printer Offline option. See if this option is selected. If it is, deselect it and exit all the windows.
Now, your HP Envy 6455e printer will return to the online status.
HP Envy 6455e Not Printing
When your HP Envy 6455e printer does not print, it will be frustrating. It will be all the more annoying if you are planning to print some critical office document and your printer refuses to print. To resolve this issue, follow these steps:
First, confirm that the printer is turned on. Confirm that the paper is loaded into the paper tray.
Check for any error messages from your printer software. Try to fix them by following the on-screen instructions.
In case you have connected your printer and your computer using a wireless connection, confirm that it is working.
If you have connected the printer and computer using a USB cable, ensure that it is securely connected at both ends.
Confirm that the printer is not in the offline or paused state.
If the problem persists even after executing the above instructions, move on to the next one to solve theHP Envy 6455e printer printing problem.
If you are making use of a Windows computer, try restarting the print spooler.
If the printing issue remains, try restarting your computer. If this technique also fails, try clearing the print queue and then attempt to print once again.
Now, you should be able to print as usual.
HP Envy 6455e Not Scanning
If your HP Envy 6455e printer refuses to scan, try the following tips to fix the problem:
First, you must make sure that the printer is turned on.
Next, download the HP Print & Scan Doctor utility onto your computer.
Run the HPPSdr.exe file from the download location on your computer.
When you are inside the HP Print & Scan Doctor utility, click Start. Next, choose your printer.
Now, click on the Fix Scanning button.
Your printer should begin scanning now. Finally complete the HP Envy 6455e printer setup.