HP Envy 5530 Install and Setup

When the control panel turns on, set your preferences.
Open the scanner lid and cartridge access door at the top.
Unpack the cartridges provided in the printer box.
Insert the cartridges into the corresponding slots.
Close the cartridge slot and access door.
Load enough sheets in the paper tray of the printer. Print an alignment sheet.
Arrange the cartridges using the sheet.
Install the HP Envy 5530 printer driver on your computer and complete the HP Envy 5530 Install and Setup.

1. Install the HP Envy 5530 printer driver on your computer after downloading it.
2. Find the driver file that you have downloaded in the destination folder.
3. Double-click on the file to start the installation process.
4. Set the link type between your HP Envy 5530 printer and computer based on their specifications.
5. Carry out the instructions on the screen and complete the installation process.

How to Connect HP Envy 5530 to Wireless

1. Turn on the router and ensure that it provides an active internet connection.
2. On the display panel of the HP Envy 5530 printer, touch the Settings icon. Select the Wireless Setup option.
3. Type the network name and password of the router.
4. Download the HP Envy 5530 printer software on your computer if you have not installed yet.
5. Follow the guidelines on the display.
6. Set the connection type as wireless.
7. Type the network name and key (password) of the same router.

HP Envy 5530 Wireless Direct Setup

1. Enable the Wireless Direct option on your printer.
2. Check if the paper tray of the printer is loaded with suitable sheets.
3. Click the Start menu present at the bottom left corner of the computer’s display.
4. Tap Settings --> Devices --> Printers & Scanners.
5. Select the Add a Printer or Scanner option and click Show Wi-Fi Direct Printers.
6. Choose your printer name that starts with the word Direct.
7. Thus your HP Envy 5530 Install and computer are connected using the Wireless Direct feature.

HP Envy 5530 ePrint Setup

• Turn on the HP Envy 5530 printer if it is powered off previously.
• Ensure that the input tray of the printer is loaded with suitable papers.
• On the control panel of the Envy 5530 printer, tap the HP ePrint button.
• Select Setup and go through the guidelines on the screen.
• Enable the Web Services option. Click Print or Print Info.
• Now an email address of the printer displays on the control panel.
• You can also find the address on the information page.
• Mail your document or image to the mail address of your printer.

HP Envy 5530 Airprint Setup

• Power up the HP Envy 5530 printer by long pressing its power button.
• Press the Wireless icon on the control panel of the 5530 printer.
• Select the Wireless Direct option.
• On your Apple system, tap the Settings icon.
• Enable the Wi-Fi option.
• Select the name of your printer which starts with the word Direct.
• Open the document you need to print on your Apple device and start printing it.
• Thus the AirPrint HP Envy 5530 Install and setup is implemented successfully.

1. Power on the HP Envy 5530 printer if it is turned off previously.
2. Load the paper tray of the printer with suitable sheets.
3. Open the access cover present at the top of the printer.
4. Now the carriage moves to its position.
5. Wait until the carriage settles.
6. Open the ink cartridge lid which you intend to replace.
7. Gently press the cartridge and remove it.
8. Take a new cartridge and unpack it.
9. Insert the cartridge into the corresponding slot.
10. Close the access cover and complete the ink cartridge replacement process.

How to Load Photo Paper in HP Envy 5530

1. Open the input tray of the HP Envy 5530 printer.
2. Remove plain paper from the tray if any.
3. Slide out the paper width guides to their maximum limits.
4. Take a bunch of photo paper and tap them on a flat surface.
5. Load the sheets with their short edge facing the printer, and print side down.
6. Slide in the paper width guides and fix the photo papers.
7. Close the paper tray.
8. Pull the paper tray extender and lift its end.
9. Thus the paper tray is loaded with suitable sheets.

How to Print on HP Envy 5530

1. Edit the document you need to print before starting to print it.
2. Open the document in an application on your computer or laptop.
3. Click the File menu present at the top of the computer’s screen.
4. Change the print configurations if needed.
5. Go to the Printer Properties or Preferences option.
6. Configure the Advanced Settings if necessary.
7. The Advanced Settings contains the Paper Type, Paper Size, Print on Both Sides and more.
8. If the Print Shortcut tab is present, configure the default settings.
9. Finally, tap OK and click Print.

How to Scan Multiple Pages on HP Envy 5530

1. Open the HP Envy 5530 Install driver on your computer.
2. Click Scan a Document or Photo.
3. Select the Save as PDF option.
4. Set the resolution range as you wish.
5. Check if the checkbox of the Show Viewer option is ticked.
6. Tap the Scan button.
7. In the Scan Preview dialog box, select the plus (+) button to scan multiple pages.
8. Finally, tap the Save button.
9. For more assistance on how to scan more pages on the HP Envy 5530 Install, contact our technical support team.

HP Envy 5530 Factory Reset

1. Power up the HP Envy 5530 printer if it is turned off previously.
2. Wait until the printer turns on and becomes idle.
3. Disconnect the power cable from the printer and electrical outlet.
4. Wait for a few minutes.
5. Link the power cord to the Envy 5530 printer and power source.
6. Do not make the power connection using a surge protector as it can cause power fluctuations.
7. Once you connect the power cord, the printer turns on automatically.
8. If the printer does not power on, turn it on by force pressing its power button. Now the HP Envy 5530 printer reset to its default configurations.

HP Envy 5530 Firmware Update

1. You can update the firmware of your HP Envy 5530 printer either using suitable option on the control panel of the printer, or the manufacturer’s website.
2. Carry out the following steps to update the firmware of your printer using the printer’s control panel.
3. Connect your printer to the network of your router or access point.
4. Find and select the ePrint icon on the control panel of the printer.
5. Tap Settings --> Product Update or Check Product Updates.
6. If the firmware update is available, select the related option and start upgrading the printer software.