HP Envy 4505 Printer Setup and Install

Set the configurations on the control panel of your printer.
Unpack the ink cartridges provided in the printer package.
Remove the protective tapes on the cartridges.
Raise the access door at the top of the printer.
Lift the lid of the ink cartridges.
Insert the cartridges into the respective slots. Close the lid and access door of the printer.
Load the input tray with suitable papers.
Print an alignment sheet and arrange the cartridges.

1. Install the printer driver after downloading it.
2. Double-click on the downloaded driver file and start the installation process.
3. Go through the instructions on the computer’s display.
4. Tick the checkbox of terms and conditions.
5. Set the connection method based on the specifications of your printer and computer.
6. The installation guidelines vary based on the OS version of your computer or laptop.
7. For more assistance to HP Envy 4505 Printer Setup and install the printer software on your computer or laptop, contact our technical support team.

How to Connect HP Envy 4505 to Wireless

1. Power up your router and ensure it provides an active internet connection.
2. On the function panel of the Envy4505 printer, select the Settings icon.
3. Pick the Wireless Setup option.
4. Provide the network name and password of your router.
5. Install the printer software on your computer or laptop if you have not downloaded yet.
6. Configure the connection method as wireless.
7. Go through the instructions on the computer’s display to link the devices.
8. Check if your router has a WPS button.
9. On the function panel of the HP Envy 4505 printer, tap the WPS button.
10. After a few minutes, press the WPS button on the router.

HP Envy 4505 Wireless Direct Setup

1. On the control panel of your printer, go to the Wireless Settings menu.
2. Check if the Wireless Direct option is present.
3. Tap OK and go back to the home screen.
4. Select the Wireless option.
5. Enable the Wireless Direct option if it is disabled.
6. Turn on the Wi-Fi option on your computer or laptop.
7. Select the name of your printer which begins with the word Direct.
8. For more guidelines to connect the devices using the Wireless Direct feature, get in touch with our technical experts.

HP Envy 4505 ePrint Setup

1. Power up your HP Envy 4505 Printer Setup and computer.
2. Load suitable papers into the input tray.
3. Ensure the ink cartridges are installed into the corresponding slots.
4. On the function panel of the printer, tap the HP ePrint icon.
5. Select the Setup option and carry out the guidelines on the screen.
6. Enable the Web Service option.
7. Now the operation panel displays the mail address of your printer.
8. You can mail your document or image to the mail address of the printer to perform its functions.

HP Envy 4505 Airprint Setup

1. Tap the Wireless icon on the function panel of the HP Envy4505 printer.
2. Enable the Wireless option and link your printer to the network of your router.
3. Connect your Apple device to the same network of the router to which you have connected your printer.
4. Open any document or image you intend to print on your Apple device.
5. Select the Share option.
6. Set print configurations and start to print.

HP Envy 4505 Ink Cartridge Installation

1. Lift the access door at the top of the printer.
2. The carriage moves to its position.
3. Wait until the carriage settles.
4. Open the cartridge access door.
5. Unpack the new ink cartridges enclosed in the printer package.
6. Peel off the protective tapes on it.
7. Do not touch the ink nozzles and electrical contacts of the cartridge to avoid printing issues.
8. Insert the cartridges into the respective slots.
9. Close the access doors at the top.
10. Ensure the input tray is loaded with suitable papers.
11. Now the printer prints an alignment paper.
12. Keep the alignment paper on the scanner glass and arrange the cartridges.

How to Replace HP Envy 4505 Ink Cartridge

1. Open the access door located at the top of the printer.
2. Now the carriage moves and settles.
3. Wait until the carriage becomes idle.
4. Open the cartridge access door.
5. Gently press and remove the cartridge which you need to replace.
6. Take a new ink cartridge and unpack it.
7. Remove the protective tapes on the cartridge.
8. Do not touch the copper-colored contacts and ink nozzles of the cartridge to avoid printing issues.
9. Insert the cartridges into the respective slot.
10. Close the access doors of the printer.
11. Print an alignment sheet and align the cartridges.

1. Load a bunch of suitable papers into the input tray.
2. Open the document or image you intend to print in an application and edit it.
3. Select the File menu located at the top of the computer’s screen.
4. Choose Printer Properties and configure additional settings like Layout, Quality and more.
5. Preview the document if needed and tap Print.
6. For more guidance to print the document on the HP Envy 4505 printer setup, contact our technical support team.

How to Copy on HP Envy 4505

1. Load the document you need to copy on the scanner glass of the printer.
2. Make sure to place the document with its print side facing down.
3. On the control panel of the HP Envy4505 printer, tap the Copy option.
4. Configure the number of copies you need.
5. Set the configurations like paper size, quality, paper type and more.
6. After configuring the settings, go back to the copy screen.
7. Tap the Black or Color button and start the copy function.

How to Scan on HP Envy 4505

1. Open the scanner lid of your printer.
2. Place the document you intend to scan on the scanner glass.
3. Link your printer and computer to the same network of a router or access point.
4. You can scan your document using the HP Scan software.
5. If you have downloaded the recent version of the full-featured printer driver, the HP Scan app installs automatically.
6. Click the Start menu on your computer’s display.
7. Type HP in the search field and select your printer name.
8. Now the HP Printer Assistant window opens.
9. Select Scan --> Scan a Document or Photo.
10. The HP Scan window appears.
11. Go to Scan Shortcut and set the scan settings.
12. Finally, click the Scan button and start the scanning process.