HP DeskJet Plus 4152 Setup

While purchasing the HP Deskjet Plus 4152 printer, check if the black and tricolor cartridges, Setup guide, Reference guide, and power cord are included with it. To know HP DeskJet plus 4152 setup for the first time, refer to the quick instructions given below.

Unpacking the HP Deskjet Plus 4152 printer

  1. Take out the printer from the box.
  2. Remove the tapes as well as the packing materials from the outside and inside of the printer.

Connecting the Power Cord

  1. Plug the printer’s power cord into an electrical outlet and press the Power button on the printer.
  2. Now, the printer will turn on.
  3. Wait until the carriage inside the printer moves to the center and stays idle.

Installing the Ink Cartridges

  1. Open the ink cartridge access door of the printer.
  2. Take one ink cartridge from the package and remove the plastic tape from it.
  3. Insert the unpacked ink cartridge into its slot in the printer.
  4. Do the same to install the other ink cartridge as well.
  5. Close the printer’s ink cartridge access door.
HP DeskJet plus 4152 setup

Loading paper in the input tray

  1. Lift the HP DeskJet plus 4152 setup’s input tray, move the paper width guide, and load enough plain paper in the tray.
  2. Align the paper width guide, open the output tray, and pull out the tray extender.

Installing the printer software

  1. Download and install the HP Deskjet Plus 4152 printer driver on your computer.
  2. Connect the computer to the printer and perform a test print from the computer.

HP DeskJet Plus 4152 Driver Download

Driver for HP DeskJet Plus 4152 Printer
  1. Download the HP Deskjet Plus 4152 printer driver by clicking the Download link on the official HP website.
  2. Alternatively, click the Driver Download button available above.

HP DeskJet Plus 4152 Driver Install

  1. Located the downloaded printer driver package on your computer.
  2. Double-click the installer file to begin the driver installation.
  3. Accept the license agreement, select the connection type, and select the software to be installed on your computer.
  4. If you prefer a USB cable connection, connect the cable when prompted.
  5. Carry out the instructions prompted on the screen to complete the installation.

HP DeskJet Plus 4152 Setup Manual Download

User Manual for HP DeskJet Plus 4152 Setup
  1. Click the Manual Download link given below to download the soft copy of the printer manual.
  2. Alternatively, you can download the user manual and other guides from the official site of the HP printer.
  3. The downloaded manual’s soft copy will be saved in the default Downloads folder.
HP DeskJet Plus 4152 Setup Manual Download

HP DeskJet Plus 4152 Wireless Setup

Procedure 1 - Using Wi-Fi Protected Setup (WPS) Push Button Configuration

  1. On the printer’s control panel, hold the Wireless button for approximately three seconds.
  2. Move to your wireless router and press the WPS button.
  3. Check if the wireless LED on the printer’s control panel stays blue.
  4. This indicates that the wireless network connection has been established successfully.

Procedure 2 - Using WPS PIN

  1. On the printer’s control panel, hold the Wireless and Information buttons together for five seconds.
  2. The printer prints a page that contains a PIN code.
  3. Enter this PIN code in the web-based setup page of the router.
  4. After two minutes, the wireless LED on the printer will be lit up.

HP DeskJet Plus 4152 Ink Cartridge Replacement

  1. Make sure the HP DeskJet Plus 4152 setup is turned on.
  2. Lower the printer’s ink cartridge access door.
  3. Wait till the carriage moves to the center of the printer.
  4. Take out both the black and tricolor ink cartridges from the printer.
  5. Unpack a new black ink cartridge and place it in the slot correctly.
  6. Perform the same to install the tricolor ink cartridge in its slot.
  7. Close the cartridge access door of the printer properly.
How to Change HP DeskJet Plus 4152 Ink Cartridge?

Guide: HP DeskJet Plus 4152 Double-Side Print

  1. Place enough paper in the printer’s input tray.
  2. On your Windows computer, open the document to be printed and click the Print option.
  3. Make sure the HP Deskjet Plus 4152 printer has been selected.
  4. Launch the Properties dialog window by clicking Properties, Options, Printer Setup, Printer Properties, Printer, or Preferences.
  5. Note: This option varies depending on your computer software.
  6. Click the Printing Shortcuts or Printing Shortcut tab and then select the Two-sided (Duplex) Printing option.
  7. Customize the print settings. For additional print settings, navigate to the other tabs and make necessary changes.
  8. Once the HP DeskJet Plus 4152 setup has printed the first side of the document, proceed with the on-screen guidelines to load the paper again and click the Continue button followed by the OK button.
  9. This will print on the other side of the paper.

How To Scan in HP DeskJet Plus 4152?

  1. Load your original document on the scanner glass of the HP Deskjet Plus 4152 printer.
  2. On your computer, launch the HP printer software and click the Scan option followed by the Scan a Document or Photo option.
  3. Navigate to the Scan Shortcuts field and choose any one of the following scan types.
  4. Save as JPEG
  5. Save as PDF
  6. Email as JPEG
  7. Email as PDF
  8. Finally, click the Scan button.

HP DeskJet Plus 4152 Fax Setup

  1. Connect your computer or other wireless devices and the HP DeskJet Plus 4152 setup to the same network.
  2. Install and open the HP Smart application on your device.
  3. Log in to your HP account. If you do not have the one, create an account.
  4. Select the Mobile Fax Tile option.
  5. If you are using a mobile device, tap Personalize Tiles and turn on the toggle switch beside the Mobile Fax option.
  6. In case you are using a computer, click Settings -> Personalize Tiles and enable the Mobile Fax feature.
  7. Return to the main screen of the HP Smart application and fill all the required fields.
  8. If you wish to add a cover page, select the Add a cover page option and enter a subject line as well as message.
  9. Scan the document that you need to fax and send it to the recipient.
  10. You can track the status of the fax using the HP Smart application.

HP DeskJet Plus 4152 Setup Troubleshooting Guidance

The most commonly occurring problems on the HP Deskjet Plus 4152 printer are offline status and paper jam. The troubleshooting steps to resolve these problems are given on this web page. Refer to the User Guide to know how to handle the printer and avoid certain issues. If you have any doubts in resolving the HP Deskjet Plus 4152 printer issues, click the Call button to contact our support members.

HP DeskJet Plus 4152 Offline Solution

Step 1

  1. First, check if the printer is turned on.
  2. If needed, disconnect all the cable connections and reconnect them correctly.

Step 2

  1. Windows 10 - Press the Win key, navigate to the app list, and choose the Windows System option.
  2. Click Hardware and Sound -> View devices and printers.
  3. Windows 8 - Click Settings -> Control Panel -> View devices and printers.

Step 3

Double-click the HP Deskjet Plus 4152 printer icon and select the See what’s printing option.

Step 4

Go to the Printer menu and then remove the checkmark beside the Pause Printing and Use Printer Offline options.

Fix HP DeskJet Plus 4152 Paper Jam

Jammed paper in the input tray

  1. Hold the jammed paper tightly and remove it gently from the HP DeskJet Plus 4152 setup’s input tray.
  2. Lift the input tray shield and remove torn pieces of paper.
  3. On the control panel, press the Cancel button.
  4. This will clear the jammed paper error message automatically.

Jammed paper in the output tray

  1. Lower the output tray and pull out the jammed paper.
  2. Make sure to remove any foreign objects from the output tray area.
HP DeskJet Plus 4152 Paper Jam Solution

Steps: HP DeskJet Plus 4152 Factory Reset

An error might persists even after clearing the jammed paper. In this case, you have to reset the printer as per the instructions given here.

  1. With the HP Deskjet Plus 4152 printer turned on, remove the power cord from the printer and the power source.
  2. After 60 seconds, connect the power cord between the printer and the power source.
  3. In the HP Smart application, tap Printer Settings -> Advanced Settings -> Settings -> Restore Defaults.
  4. HP DESKJET PLUS 4152 PASSWORD RESET
  5. You cannot reset the printer password separately. But, you can change it by performing the steps provided below.
  1. Open the HP Smart application on your mobile device and tap Printer Settings -> Advanced Settings.
  2. Select the ‘Do not show this message again’ option and tap OK.
  3. Tap Settings -> Password settings, enter your existing password in the Password field, and type a new password in the Confirm Password field.
  4. Tap the Apply option to save the password.
  5. Note: The default printer password is located at the printer’s rear side or in the cartridge access area.
  6. If you forget the changed password, reset the HP DeskJet Plus 4152 setup to factory defaults.