HP Deskjet 3630 Setup Guide

Step 2 : Set Up the Power Connection of the HP Deskjet 3630 Printer

1. Remove the power cable from its package.
2. Plug an end of the cable to the power port of the HP Deskjet 3630 printer & the other end to an electrical outlet directly.
3. Do plug the cable to a surge protector as it may cause power fluctuations.

Step 3 : Switch On the HP Printer and Install the Ink Cartridges

1. Press the power button on the HP Deskjet 3630 printer to turn it on.
2. Follow the prompts and instructions on the control panel of the printer.
3. Remove the cartridges from their package & insert into the corresponding slots of the HP Deskjet 3630 setup.

Step 4 : Load Compatible Sheets into the Input Tray of the HP Printer

1. Take a stack of suitable sheets and tap them on an even surface.
2. Fan the sheets and load them into the input tray of the HP Deskjet 3630 printer.
3. Align the sheets by adjusting the paper width guides.
4. Set up the software for the HP Deskjet 3630 printer to complete the unboxing process. Refer to the following topic to configure the printer software.

HP Deskjet 3630 Manual Download Guide

1. Once you click the below given key, the user guide (softcopy) for the HP Deskjet 3630 printer gets downloaded on your computer.
2. After downloading the manual file, you can save it in any desired folder on your computer.
3. You can view the manual even when your system is not connected to any network.

Steps: HP Deskjet 3630 Driver Installation

1. Locate the HP Deskjet 3630 printer driver file which you have downloaded on your computer.
2. Double-click the driver file to open it.
3. Follow the guidelines on the screen.
4. Accept the Terms & Conditions while installing the HP Deskjet 3630 setup software.
5. Set up the connection between your printer and computer.
6. Follow the instructions to complete the HP Deskjet 3630 printer software installation process.

How to Change Ink Cartridge on HP Deskjet 3630 Printer?

1. Make sure that you have a new ink cartridge for replacing the old one.
2. Begin the ink cartridge replacement process by turning on the HP Deskjet 3630 printer.
3. Make sure that the input tray of the printer is loaded with compatible sheets.
4. Raise the exterior cover of the HP Deskjet 3630 setup.
5. Open the ink cartridge access cover of the HP Deskjet printer.
6. Now the carriage of the printer moves and settles at its place.
7. Wait until the carriage becomes idle.
8. Remove its new ink cartridge from its package.
9. Insert the cartridge into the correct slot of the printer.
10. Fix the cartridge properly and close the access cover.
11. Follow the prompts on the control panel.
12. The printer prints an alignment sheet. Keep the sheet on the scanner glass of the printer with their print side facing down.
13. Tap the Start Copy Black or Start Copy Color key on the panel to align the ink cartridges.

HP Deskjet 3630 Wifi Setup Guidance

1. Make sure that your router is functioning correctly & providing an active internet connection.
2. Enable the Wi-Fi feature on your computer.
3. Choose the network name of the router.
4. Also, provide the passkey of the router when the system prompts.
5. On the control panel of the HP Deskjet 3630 printer, tap the Setup key.
6. Select the Network or Wireless menu.
7. Choose Restore Network Settings.
8. Make sure that the wireless light on the printer starts to flash.
9. Select Wireless Setup Wizard.
10. Install the HP Deskjet 3630 driver software on your computer.
11. Configure the wireless setup while installing the driver.

How to Photocopy on HP Deskjet 3630?

1. Tap the Copy or Copy Document key on the control panel of the HP Deskjet 3630 printer.
2. Touch the Settings icon to configure more copy settings.
3. Go to the 2-Sided Copying menu.
4. Tap ON. Touch Start or return to the main screen.
5. Finally, tap Start Black, Start Color, or OK button to begin the copy function.

How to Scan a Document on HP Deskjet 3630?

1. Refer to the following steps to scan using the HP Easy Scan app.
2. Make sure that the HP Deskjet 3630 setup is switched on.
3. Connect your printer and computer.
4. On your Mac device, click the Finder menu.
5. Go to Applications. Search for HP Easy Scan and select it from the result.
6. Now the applications open on the screen.
7. Click the Scanner drop-down menu.
8. Choose the name of your printer.
9. Click the Presets drop-down menu.
10. Choose a scan job.
11. Configure the scan settings like the Orientations, Resolutions, Color Mode, and Page size.
12. If you need to execute the duplex scanning process, tap the checkbox near Scan Both Sides of Page. Choose Done.
13. Place the document you desire to scan on the scanner glass of the printer with their printed side facing down.
14. Click Scan on the display of your computer.
15. You can edit the scanned document if needed.
16. After scanning the document, you can save it in the desired folder on your computer.