HP Deskjet 1510 Setup Guidance

  1. Cut the sealing tape and pry the HP1510 box open.
  2. Pull the flaps back to access the HP printer accessories located at the top of the box.
  3. These include the HP power cord, power cord adapter, USB cable, HP1510 printer software CD, and the ink cartridges.
  4. Discard the cardboard packing material.
  5. Set the HP Deskjet 1510 setup box on its side.
  6. Use the plastic bag’s handles to slide the printer out of the box.
  7. Remove the plastic bag. Set it aside for recycling.
  8. Peel off the tapes keeping the HP1510 machine’s lids from accidentally opening.
  9. Open the cartridge access door. Remove the tape and cardboard piece from the left-hand side of the printer’s interior compartment.
  10. Close the cartridge access door, which is black in color.
  11. Take the purple connector and attach it to the rear side of the HP1510 printer. Attach the free end of this power cable to the adapter.
  1. Plug in the free end of the adapter cable into the wall outlet.
  2. Press the HP1510 machine’s Power button located on the top-left side.
  3. The HP1510 gets powered on and makes some noises as it initializes.
  4. After it initializes, lower the ink cartridge access door.
  5. Unpack the HP black ink cartridge and peel off the tape covering the ink nozzle.
  6. Install it in its respective slot. Push the black cartridge in until it locks into position.
  7. Repeat these steps to install the color ink cartridge.
  8. Lift the ink cartridge access door until it snaps into place.
  9. Raise the HP 1510 printer’s top paper feeder tray and move the edge width guide to the end.
  10. Load an A4 paper stack and adjust the guide to secure it.
  11. Install the HP1510 printer software on your computer to complete the rest of the setup.

HP Deskjet 1510 Driver Download

Windows OS

Download the HP1510 printer driver for your Windows 10 computer

HP Deskjet 1510 Driver for Windows

MAC OS

You can download the HP1510 driver on your Mac 10.14 computer

HP Deskjet 1510 Printer Driver for Mac

HP Deskjet 1510 Manual Download

The HP Deskjet 1510 setup user manual for your Windows computer from this page. For Mac users, the HP1510 user manual can be downloaded

How to Install HP Deskjet 1510 Printer Without CD?

To install the HP Deskjet 1510 printer without a CD, you need to download the software on your computer and install the HP machine by running the installer. Make sure that you run the HP Deskjet 1510 setup software on your computer as an administrator.

How to Refill Ink Cartridge in HP Deskjet 1510?

  1. Purchase an ink refill kit from a trusted website.
  2. It comprises two syringes, a priming kit, and ink bottles.
  3. Remove the HP Deskjet 1510 setup’s ink cartridge.
  4. Attach the priming kit to the ink cartridge.
  5. Set the ink cartridge attached to the priming kit upside down to expose the ink filling nozzle.
  6. Wipe any leaked ink with a lint-free cloth.
  7. Insert the syringe without the needle into the nozzle and draw ink from the cartridge slowly. Set the syringe aside.
  1. Use the other syringe to which a needle is attached to draw ink from the ink bottle.
  2. Set the ink cartridge right side up.
  3. Position the needle on the small hole at the top surface of the cartridge and push it down until the needle touches the sponge inside the cartridge. (about 1 to 1.5 inches)
  4. Inject the ink into the cartridge slowly until all the ink in the syringe is absorbed by the sponge in the cartridge.
  5. Wipe off the excess ink from the surface of the cartridge after taking the needle out.

How to Remove Cartridge from HP Deskjet 1510?

  1. Check whether the HP Deskjet 1510 setup is turned on. If it is not on, power it on.
  2. Make sure that there is enough paper in the HP printer.
  3. Grasp the ink cartridge access door and lower it.
  4. Wait until the cartridge carriage stops at the center.
  5. Gently press the cartridge’s top surface to release it from its slot.
  6. Now, take it out of the printer.

How to Install a New Ink Cartridges?

  1. Unpack the new HP cartridge.
  2. Peel off the tape, which seals the ink cartridge’s nozzle.
  3. Place the new HP cartridge in its slot and push it in until it locks into position.
  4. Repeat these steps to install another cartridge if required.

Install HP Deskjet 1510 Driver Software

After establishing a power connection, installing the ink cartridges, and loading paper, the next step is to install the driver.

  1. Double-click the HP1510 software installer that you downloaded on your computer.
  2. Follow the on-screen prompts to establish the computer-HP1510 connection.
  3. The HP1510 software installer screen appears. Click Continue.
  4. After a loading screen, the software selection screen appears.
  5. Click the Customize button, choose the software packages to be installed, and then click Next.
  6. Accept the terms of the HP1510 installer and click Next.
  7. The HP1510 software installer installs the software packages that you selected and then prompts you to set the usage purpose and location of the printer.
  8. Then, you can choose to activate the HP1510 printer or do it later by clicking the X(close) button.
  9. This completes the HP1510 driver installation.
HP Deskjet 1510 setup driver

Steps: HP Deskjet 1510 Wireless Setup

The HP1510 printer does not support wireless connectivity.

How to Connect HP Deskjet 1510 to Laptop?

  1. Before connecting the HP1510 printer to a laptop computer, ensure that these conditions are met.
  2. The HP Deskjet 1510 setup is powered on.
  3. Ink cartridges have been installed.
  4. Paper has been loaded.
  5. Download the HP1510 driver from the manufacturer’s site or insert the HP software CD and run the software installer.
  6. Click the T&C agreement checkbox, select the software packages, and choose the connection method.
  7. Attach the USB cable to the HP1510 printer and computer only when prompted.
  8. Follow the rest of the on-screen prompts to establish the HP1510-laptop computer connection. 

How to Scan On HP Deskjet 1510?

  1. Power on the HP1510 printer.
  2. Ensure that it is connected to the computer, and the printer software has been installed.
  3. Grasp the top lid of the HP Deskjet 1510 setup and keep lifting it until you feel resistance.
  4. Locate the marking on the right front corner of the HP printer’s platen.
  5. Align the document to be printed with that marking.
  6. Lower the scanner cover.
  7. Open the HP1510 printer software on your computer.
  8. Press the Windows icon located on your keyboard --> The Start menu opens --> Choose All Programs/Apps --> HP -->HP Deskjet 1510 --> HP Deskjet 1510.
  9. The HP Deskjet 1510 software loads.
  10. Choose the ‘Scan a document or photo’ option and set the scanning preferences. Click Scan to begin scanning the document with the preferences that you have set.

HP Deskjet 1510 Printhead Cleaning Using HP Software

  1. On your computer, open the HP Deskjet 1510 software.
  2. If you recently installed the HP1510 software, there should be a shortcut on your desktop.
  3. Double-click it.
  4. Alternatively, navigate to the application through this path.
  5. Start menu --> All Programs --> HP --> HP Deskjet 1510 --> HP Deskjet 1510.
  6. The HP Deskjet Printer Assistant window opens.
  7. Click the ‘Maintain Your Printer’ option.
  8. Ensure that there is paper in your HP Deskjet 1510 printer and click the ‘Clean Ink Cartridges’ button.
  9. Wait until the printhead is cleaned. Close the HP Printer Assistant window.

How do I Reset HP Deskjet 1510?

Reset the HP Deskjet 1510 printer if it enters an error state. Follow these steps to reset the HP Deskjet 1510 setup.

  1. Power off the HP Deskjet1510 printer.
  2. Detach the power cable and wait for sixty seconds.
  3. Reattach the power cable to the HP1510 printer.
  4. Power on the HP1510 printer and let it initialize.
  5. This completes the HP1510 reset procedure.
printer setup support