EPSON XP-245 TROUBLESHOOTING STEPS

Some of the commonly occurring Epson XP-245 printer problems and their troubleshooting steps to resolve them are provided on this page. If you need assistance in resolving the printer problems using Epson XP-245 troubleshooting steps, contact our technical experts.

Epson XP-245 troubleshooting

EPSON XP-245 OFFLINE

  1. Make sure the Epson printer is turned on.
  2. On your Windows computer, press the Win and R keys together.
  3. When the Run dialog box opens, enter Control Panel.
  4. Choose the Devices and Printers option.
  5. Right-click the Epson XP-245 printer and click See what’s printing.
  6. Navigate to Printer and remove the checkmark beside the ‘Use Printer Offline’ option if it is selected.

EPSON XP-245 PAPER JAM

  1. Hold the jammed paper tightly and pull it out from the rear paper feed.
  2. Also, remove it from the output tray.
  3. If the jammed paper is inside the printer, raise the scanner unit.
  4. Take out the jammed paper and close the Epson XP-245 printer’s scanner unit properly.

EPSON XP-245 PAPER NOT FEEDING

  1. Place paper in the correct direction.
  2. Align the edge guides against the paper edges.
  3. If you want to place a stack of paper, load one at a time.
  4. It is advised not to load paper more than the maximum number of sheets.
  1. If you are loading plain paper, they should not exceed above the maximum level mark on the edge guides.
  2. Clean the roller using the cleaning sheet.

EPSON XP-245 PAPER LIGHT FLASHING

  1. If the paper light blinks slowly on the Epson XP-245 printer, it is mainly due to the jammed paper.
  2. Remove the jammed paper from the output tray, rear paper feed, and inside the printer.
  3. Press the Start button and check if the error has been resolved.

EPSON XP-245 WIFI LIGHT FLASHING ORANGE

  1. If the right side of the Wi-Fi LED blinks in orange, it is mainly due to the wireless network connection error.
  2. Pressing the Wi-Fi button will resolve this error.
  3. Hold the Wi-Fi button and release it after four seconds to perform a Wi-Fi auto setup on the Epson XP-245 printer using Epson XP-245 troubleshooting steps.

EPSON XP-245 FLASHING GREEN LIGHT

  1. The green light blinks when the Epson XP-245 printer tries to connect to a wireless network. Once it is connected, the green light stays on.
  2. Wait for some time and check if the left side of the Wi-Fi LED stays green.
  3. If not, perform the wireless setup again.

EPSON XP-245 POWER BUTTON FLASHING

  1. If the Power LED is blinking, it indicates that the Epson XP-245 printer is busy.
  2. If you see this error after installing ink cartridges, it might be due to the improper installation.
  3. In such cases, re-install ink cartridges by performing the following instructions.
  4. Lift-open the printer’s scanner unit.
  5. Move the ink cartridge holder.
  6. Remove the black ink cartridge and insert it into its slot correctly.
  7. Do the same to re-install the rest of the ink cartridges in the respective slots.
  8. Close the printer’s scanner unit and press the Ink charging button.
  9. Wait until the ink charging process completes.
Epson XP-245 troubleshooting

EPSON XP-245 WIFI BUTTON NOT WORKING

  1. If you are using the WPS Push Button Setup method for connecting the printer to a wireless network, make sure you have pressed the Wi-Fi button on the printer for approximately three seconds.
  2. Instead, try to connect the Epson XP-245 printer to Wi-Fi using the WPS PIN Code Setup method or use Epson XP-245 troubleshooting steps.

HOW TO RESET EPSON XP-245 PRINTER

  1. You can reset all your network settings to the factory default.
  2. To do this, turn off the Epson XP-245 printer.
  3. On the control panel, hold the Information and Power button at the same time until the Wi-Fi light blinks alternatively in green and orange.
  4. Wait until the Wi-Fi LED turns off.
  5. This indicates that all the network settings have been reset to defaults.

EPSON XP-245 WILL NOT PRINT BLACK

  1. Check if the ink level of the black ink cartridge is not low.
  2. If it is low, replace the used black ink cartridge with a new one.
  3. If the issue persists, access the printer driver on your Windows computer.
  4. Navigate to the Maintenance tab, select the Nozzle Check option, and follow the on-screen prompts to clean the print head.

EPSON XP-245 ALL LIGHTS FLASHING

  1. If the Power, Ink, Paper, and Wi-Fi lights are blinking at the same time, it indicates that there is a printer error. Resolve it by performing the following steps.
  2. Raise the Epson XP-245 printer’s scanner unit.
  3. Check if there are any torn pieces of paper or protective material inside the scanner area.
  4. If so, remove them from the printer.
  5. Turn off the printer and turn it back on by pressing the Power button.
  6. Finally complete your Epson XP-245 troubleshooting process.
printer setup support