Epson WorkForce 845 Setup Guidance

Step 1 : Remove the Epson Workforce 845 printer from its box.

1. Remove the protective cover of the Epson Workforce 845 printer carton.
2. Open the carton and take out the printer from it.
3. Keep the Epson WorkForce 845 Setup on a flat surface.
4. You can find the printer components like the ink cartridges, power cable, connecting cord, manual, and installation CD in the carton.

Step 2 : Execute the Power Connection of WF-845 Printer.

1. Unpack the power cord given in the printer carton.
2. Connect one terminal of the cord to the power port of the Epson WorkForce 845 printer & the other end to a power outlet.
3. Press the power key on the Epson printer to turn it on.
4. Configure the settings like the Language, Country, and more on the control panel of the Epson WorkForce 845 printer.

Step 3 : Insert the Ink Cartridges

1. Lift the scanner unit at the top of the Epson WorkForce 845 printer.
2. Open the cover of the cartridge.
3. Take the cartridges provided in the printer box and shake them for 4 to 5 times.
4. Unpack the cartridges and peel off the tapes on them.
5. Fix the cartridges into the respective holders of the Epson WorkForce 845 printer.

Step 4 : Load the Input Tray of the Epson WF-845 Printer

1. Extend the paper cassette 1 of the Epson WF-845 printer.
2. Place a bunch of sheets in the cassette with their printable side facing down.
3. Close the paper cassette of the Epson WorkForce 845 printer.

Step 5 : Setup the Fax Line

1. Unpack the phone cord provided in the printer box.
2. Connect an end of the cable to the LINE port of the Epson WorkForce 845 printer & the other terminal to a phone wall jack.

Step 6 : Launch the Epson WorkForce 845 Printer Software

1. Download and install the recent version of the Epson WorkForce 845 printer software on your computer.
2. You can avail the software from this site for free.
3. Make use of the Driver Download button in the below given topic to download the software for free.
4. Connect the Epson WorkForce 845 Setup to your computer while installing the software.

How to Change Ink Cartridge in Epson WF-845?

1. You can replace the ink cartridges of the Epson WorkForce 845 printer if they are damaged or their ink levels are low.
2. Power up the Epson WorkForce 845 Setup by using its power key.
3. Raise the scanner unit at the top of the Epson printer.
4. Open the cover of the ink cartridge.
5. Remove the cartridge from the Epson WorkForce 845 printer which you need to replace by using its tab.
6. Take a new cartridge and rock it for 5 to 6 times.
7. Unpack the cartridge and remove its protective cover.
8. Fix it into the correct slot.
9. Close the cartridge access cover and scanner unit.

How to Connect Epson WorkForce 845 to Wifi?

1. Tap the Home button on the control panel of the Epson WorkForce 845 setup.
2. Locate the Setup option by using the directional keys and select it.
3. Select Network Settings Wireless LAN Setup.
4. Choose the Setup Wizard option.
5. Make sure that your router is in an active state.
6. Choose the network name of the router and provide its passkey.
7. Print a network setup report to check if the Wi-Fi Setup is configured correctly.
8. Tap the Start key to print the network setup report.

WF-845 Scanner Driver for Windows

WF-845 Scanner Driver for Mac

How to Scan from Epson WF-845?

1. Make sure that printer software is installed on your computer.
2. Keep your original document for scanning on the respective place of the Epson printer.
3. Connect your printer and computer.
4. On the control panel of the Epson WorkForce 845 setup, tap the Scan key.
5. Choose one of the scan function.
6. Follow the prompts on the screen to execute the scan function.

1. Refer to the following steps to send a fax from the Epson WorkForce 845 printer.
2. Keep your document for faxing in the respective place of the Epson WorkForce 845 setup.
3. On the control panel of the Epson WorkForce printer, tap the home key.
4. Locate the Fax option and select it.
5. Highlight the Send Fax option and press OK.
6. Provide the fax number of your recipient.
7. Click the Menu key to change the fax settings.
8. Tap OK after configuring the fax settings.
9. Press the Start key to begin the fax function.
10. For more guidance regarding the fax function of the printer, reach our well-qualified technical support team.

Solved: Epson WorkForce 845 Fax not Receiving Issue

1. Make sure that the sender’s and recipient’s fax machine is powered on and in an active state.
2. Ensure that the document for faxing is placed on the respective place of the Epson WorkForce 845 setup.
3. Make sure that the Auto Answer mode is enabled.
4. Turn on the ECM (Error Correction Mode) setting.
5. Print a Fax Connection Report.
6. Go through the report to check if the fax not receiving issue is solved.

Solved: Epson Workforce 845 won't Print Black

1. Make sure that the black ink cartridge is working properly.
2. Check if the black cartridge is not damaged.
3. Open the access doors of the Epson WorkForce 845 printer.
4. Remove the black ink cartridge from the printer.
5. Check if the cartridge is not damaged and functioning properly.
6. If the cartridge is damaged, replace it with a new one.
7. Insert the cartridge into its slots correctly.
8. Make sure that the protective component of the cartridge is removed before fixing it.
9. Check if the ink level of the black ink cartridge is high.

Solved: Epson WF-845 Airprint not Working Issue

1. Make sure that your Apple or Mac device and Epson WorkForce 845 printer are connected to the same network of a router or access point.
2. Ensure that your Epson printer supports the AirPrint feature.
3. Update the DNS configurations of your router’s internet to 8.8.8.8 and 8.8.4.4 for Google’s Public DNS.
4. Disable the Airplane mode on your Apple device if enabled.
5. Make sure that your router supports Bonjour Packets.
6. Enable the Bonjour settings on your Epson WorkForce 845 printer.
7. For more solutions to solve the Epson WorkForce 845 AirPrint not working issue, reach our well-qualified technical experts for more solutions.

Solved: Epson WorkForce 845 Scanner not Working Issue

1. Check if the scanner glass of the printer is free from debris and foreign materials.
2. Delete the scanner software on your computer.
3. Download and install the recent version of the scanner software on your computer.
4. You can avail the scanner driver from this page for free.
5. Make sure that you have placed your document for scanning on the scanner glass of the Epson WorkForce 845 setup properly.