Complete Epson WorkForce 615 Setup Guidance

Step 1: Remove The Epson WorkForce 615 Printer From Its Package.

1. Remove the packing tapes over the Epson WorkForce 615 setup box.
2. Take out the printer from the carton and keep it on a flat surface.
3. Make sure that the surface is clean before placing the printer.
4. Take the printer components from the box and keep them aside.
5. The components include the power cord, phone cable, ink cartridges, and software installation CD.

Step 2: Power Up The Epson WorkForce 615 Printer and Set The Configurations.

1. Unpack the power cable given in the printer carton.
2. Plug an end of the cable to the power port of the Epson WorkForce 615 printer and the other terminal to an electrical outlet directly.
3. Raise the control panel of the printer and press the ON button to turn on the printer.
4. Configure your desired settings by utilizing the directional keys.

Step 3: Fix The Ink Cartridges.

1. Raise the scanner lid of the Epson WorkForce 615 printer.
2. Raise the access cover of the Epson printer.
3. Rock the cartridges for 4 to 5 times provided in the printer carton.
4. Unpack the cartridges and insert them into the corresponding holders.
5. Fix the cartridges into the holders by pressing them gently.
6. Lower the scanner unit.
7. Tap OK on the control panel of the Epson WorkForce 615 setup.

Step 4: Load Paper In The Paper Tray.

1. Raise the paper support and pull its extensions.
2. Pull the output tray to its maximum limit.
3. Raise the stopper of the tray.
4. Move the edge guide to the left by holding the feeder guard forward.
5. Load enough sheets with their printable side facing up.
6. Slide over the edge guides.

Epson WorkForce 615 Manual Download Guidance

The manual has guidelines to configure the software & hardware of the Epson WorkForce 615 setup. It also includes instructions to execute the basic functions of the printer like the printing, scanning, and more. We offer a soft copy of the manual for free. After downloading the manual, you can use it even when your computer is in an offline state.

Epson WorkForce 615 Driver Installation Guidance

1. Install the driver for the Epson WorkForce 631 printer once you download it. You can utilize the Driver Download keys on this page to obtain the software for free.
2. Click the button and wait until your computer downloads the software.
3. You can find the downloaded software file in the Download folders.
4. You can save the file in the desired folder on your computer if needed.
5. Double-click the file to open it.
6. Follow the guidelines & prompts on the display to install the Epson WorkForce 615 printer software on your computer.

How to Change Ink Cartridge in Epson WorkForce 615?

1. Power up your Epson WorkForce 615 printer if it is switched off previously.
2. Find the scanner unit at the top of the printer and raise it.
3. Also, raise the cartridge access cover of the Epson WorkForce 615 setup.
4. Locate the cartridge which you need to replace and take it out.
5. Take the new cartridge which you have purchased for replacing the old one.
6. Shake the cartridge and remove it from the package.
7. Do not forget to remove the yellow-colored tape on the cartridge.
8. Insert the cartridge into the holder.
9. Gently push the cartridge against the holder to fix it.
10. Once the cartridge is fixed, it produces a click sound.
11. Close the cartridge access cover and scanner unit.
12. Tap OK to complete the ink cartridge replacement process.

Guide: Epson Workforce 615 Wireless Setup

1. Locate the Setup icon on the control panel of the Epson WorkForce 615 printer and tap OK to select it.
2. You can utilize the arrow keys to find the options.
3. Select the Network Settings option.
4. Choose Wireless LAN Setup Wireless Setup Wizard.
5. Ensure that your router is switched on and in a ready state.
6. Select the network name of your router and tap OK.
7. Specify the passkey of the router if prompted.
8. Check the credentials on the Confirm Network Settings screen and tap OK.
9. Tap the Home key. Wait until the printer gets linked to the router’s network.
10. Once the Epson printer connects to the router, the Wi-Fi icon starts to appear on the control panel.

Guide: Epson WorkForce 615 Print Envelopes

1. Place your envelope for printing in the left corner of the paper feeder.
2. Adjust the edge guides to fix the envelope.
3. Open any word application on your computer.
4. Type the content to be printed on the envelope.
5. Go to the File menu to select the Print option.
6. Now the Print dialog box appears on the screen.
7. Set the print settings according to the loaded envelope.
8. Finally, tap Print to print the envelope.
9. Wait until the Epson WorkForce 615 setup prints the envelope.

1. Clean the printer by using a lint-free cloth or cotton swab.
2. Locate the ink cartridges and remove them from the printer.
3. Reconnect the power cable of the Epson WorkForce 615 setup.
4. Reconnect your printer and computer.
5. Reset the configurations of the printer to its default settings.