Epson WorkForce 600 Setup Guidelines

Unpack The Epson WorkForce 600 Printer

1. Remove the cover over the Epson WorkForce 600 printer carton to open it.
2. The Epson WorkForce 600 Setup and its components are given in the printer box.
3. The components are the power cable, ink cartridges, Ethernet cord, and software installation CD.

Set Up The Epson WorkForce 600 Printer’s Power Connection

1. Plug one end of the cable to the power port of the Epson WorkForce 600 printer and the other terminal to a power source directly.
2. Lift the control panel of the printer.
3. Tap the ON key on the front panel.
4. Configure the settings like the Language, Country/Region, Date, and Time.

Insert The Cartridges Into Their Holders Of The Printer

1. Open the scanner unit at the top of the Epson WorkForce 600 printer.
2. Raise the cartridge cover of the Epson printer.
3. Rock the ink cartridges provided in the printer box for 4 to 5 times.
4. Remove the cartridges from its package.
5. Peel off the tapes on cartridges.
6. Insert the cartridges into the respective holders of the printer.
7. Gently press the cartridges until they fit into the slots.
8. Close the access cover of the cartridges and scanner unit.
9. Tap the OK key on the control panel of the printer.

Load Enough Sheets In The Paper Tray

1. Open the paper support and pull the extensions.
2. Extend the output tray and open the stopper.
3. Move the feeder guard forward.
4. Squeeze the edge guide and slide it to the left printer.
5. Take a bunch of sheets and tap them on a flat surface.
6. Keep the sheets against the edge guide.
7. Make sure that the sheets are placed with their printable side facing up.
8. Slide over the edge guide and flip the feeder guard back.

Attach The Power Cable

1. Unpack the power cord provided in the Epson WorkForce 600 Setup box.
2. Plug one end of the telephone wall jack and the other end to the LINE port of the printer.

Install The Printer Software To Your Computer

1. Download the Epson WorkForce 600 printer software on your computer.
2. Install the software once you download it.
3. Connect the printer to your computer while installing the printer software.

Epson Workforce 600 User Manual Guidance

The user manual has complete guidelines to set up the hardware and software of the Epson WorkForce 600 printer. You can also find solutions to fix the Epson printer issues in the manual. The file is in the PDF format.

Epson workforce 600 Driver Installation Guidance

1. The installation procedure differs based on the OS version of your computer or laptop.
2. Firstly, download the software for the Epson WorkForce 600 printer.
3. You can avail the driver by using the Driver Download button on this page.
4. Double-click the driver file that you have downloaded on your computer.
5. Follow the instructions to install the printer software.
6. Once you install the software, you can enjoy the functions of the Epson WorkForce 600 setup.

Epson WorkForce 600 Scanner Driver for Windows

The scanner driver is used to perform the scan operation of the Epson WorkForce 600 printer.

Epson WorkForce 600 Scanner Driver for Mac

Tap the Scanner Driver Download key to download the ICA Scanner driver on your Mac computer or laptop.

Steps: Epson WorkForce 600 Wifi Setup

1. Reset the networks settings of the Epson WorkForce 600 setup.
2. Tap the Home key on the control panel.
3. Locate the Setup option and press OK to select it.
4. Choose Network Settings Wireless LAN Setup.
5. Tap Yes on the Information screen that displays on the screen.
6. Touch the Enable key.
7. Choose the Manual Wireless LAN Setup option. Tap OK.
8. Follow the prompts on the display.
9. Choose the Ad Hoc Mode and tap OK.
10. Select Enter SSID.
11. Use the arrow keys to select the network name of your router.
12. Specify the network’s passkey when the system prompts.
13. Use the Menu key to switch from the uppercase to lowercase and vice versa.
14. Continue with the guidelines on the display to complete the Wi-Fi Setup of the Epson WorkForce 600 printer.

How to Connect Epson WF-600 to Computer?

1. Connect your Epson WorkForce 600 Setup to the network of your router.
2. Make use of the guidelines in the previous topic to configure the Wi-Fi setup of the printer.
3. Link your computer to the same network of the router.
4. Install the printer software on your computer.
5. Configure the wireless option while installing the software to connect the devices.

Fixed: Epson WorkForce 600 Scanner not Working

1. Make sure that the original document for scanning is placed in the respective place of the printer correctly.
2. Make use of the scanner software to execute the scan function of the Epson WorkForce 600 printer.
3. Delete the scan software on your computer.
4. Download and install the recent version of the scan software on your computer.
5. You can avail the scan software on this page for free.
6. Make use of the Scan Driver Download key on this page to download the scan software.

• Cancel all the print job of the Epson WorkForce 600 printer.
• Check for jammed sheets in the rear paper feed slot of the printer and remove them.
• Open the scanner unit at the top of the Epson WorkForce 600 printer.
• Check for paper jams inside the printer and remove them.

• Close the scanner unit.
• Check if there are any jammed sheets in the paper cassette of the Epson WorkForce 600 printer.
• Remove jammed sheets in the rear cover of the printer if any.
• Also, check for jammed sheets in the ADF of the printer and remove them.

1. Load compatible sheets in the sheet feeder of the Epson WorkForce 600 setup.
2. Tap the Home key on the control panel of the printer.
3. Locate the Setup option on the control panel of the printer and tap OK to select it.
4. Select the Maintenance option.
5. Click Head Cleaning.