Complete Epson WF-435 Setup Guidance

Step 1:Remove the Epson WorkForce 435 printer from its package

1. Open the Epson WF-435 Setup box and find the printer and its components inside it.
2. The components are:
   • Epson WorkForce 435 printer software installation CD,
   • AC power cord,
   • Phone cable,
   • Printer manual, and
   • Ink cartridges.

Step 2:Configure your preferences

1. Attach the power cord to the printer and electrical wall outlet.
2. Turn on the Epson WorkForce 435 printer by force pressing its power button.
3. Set the configurations like the language, country or region, date, and time.

Step 3:Insert the ink cartridges

1. Open the scanner unit at the top of the Epson WorkForce 435 setup.
2. Also, raise the cartridge cover.
3. Take the ink cartridges provided in the printer box and shake them.
4. You can find yellow-colored tapes on the cartridges.
5. Remove the tapes and insert them into the respective holders.
6. Gently press the cartridges until they fix into the holders.
7. Close the access door of the ink cartridge and scanner unit.
8. Tap OK on the control panel of the printer.

Step 4:Load suitable sheets in the tray

1. Open the paper support of the printer and pull its extensions.
2. Also, pull the output tray extensions and open the stopper.
3. Slide the edge guide to the left of the Epson WF-435 Setup.
4. Take a stack of letter or A4 sheets and tap them on an even surface.
5. Keep the sheets against the right-edge guides with their printable side facing up.
6. Move the guide over the sheets.

Step 5:Connect the phone cable

Plug an end of the provided phone cable to a telephone wall jack and the other end to the LINE port of your Epson WorkForce 435 printer.

Step 6:Execute the connection & install the Epson printer software

Download and install the Epson WorkForce 435 printer software on your computer.

Note:The software can be obtained from this page for free. Execute the connection between your Epson printer and computer to complete the setup.

Epson WorkForce 435 User Manual Download

If you are in search of the manual of the Epson WF-435 setup, you are in the destination. Make use of the Manual Download key below to download the manual of the Epson WorkForce 435 printer for free. The manual can also be used even when your system is not connected to a network.

Guide: Epson WorkForce 435 Wireless Setup

1. Refer to the following steps to set up the wireless connection on the control panel of the Epson WorkForce 435 printer.
2. Tap the Menu key on the control panel of the Epson WF-435 setup.
3. Locate the Wi-Fi Settings option by using the arrow keys and tap OK.
4. Find Wi-Fi Setup Wizard and tap OK.
5. Ensure that your router is switched on & working properly.
6. Choose the network name of your router and tap OK.
7. Provide the security key of the router and execute the wireless setup.

How to Change Ink in Epson WorkForce 435?

1. Switch on your Epson WorkForce 435 printer if it is powered off previously.
2. If you find any message on the control panel of the printer to replace the cartridge, press OK.
3. If you need to replace the cartridge before receiving the message, refer to the following steps.
4. Tap the Menu key on the control panel of the Epson WorkForce 435 printer.
5. Go to Maintenance and select Ink Cartridge Replacement.
6. Locate the scanner unit at the top of the Epson WF-435 setup and raise it.
7. Open the access cover of the cartridge.
8. Locate the cartridge which you need to replace and take it out from the printer.
9. Take a new cartridge and tremble it.
10. Unpack the cartridge and remove the tapes over it.
11. Insert the cartridge into the respective slot.
12. Close the access cover and scanner unit.
13. Tap OK on the control panel of the printer.

Epson WF-435 Scanner Driver for Windows

Epson WF-435 Scanner Driver for Mac

How to Scan Documents with Epson WF-435?

1. Place your original document for scanning on the Epson WorkForce 435 printer’s scanner glass with their printed side facing down.
2. Open the Epson Scan software on your system.
3. Choose the Scan mode.
4. Set the settings that are related to the scan function and tap Scan to begin the scanning process.

Epson WF-435 Scan Multiple Pages Guidance

1. Place your document for scanning in the ADF (Automatic Document Feeder) of the Epson WF-435 Setup.
2. Open the Start Epson Scan app on your computer.
3. Choose either the Home mode or Professional mode.
4. Go to the Destination settings and configure the related settings.
5. Preview the scanned document if needed.
6. Tap Scan to begin the scanning process.
7. In the Scan File Settings window, choose the File Type as PDF. Tap OK.
8. Follow the instructions or guidelines on the display to complete the scanning process.

How to Print from iPhone using Epson WF-435?

1. You can print from your iPhone by using the AirPrint feature.
2. Before you start the printing process, make sure that you have loaded enough sheets in the sheet tray of the Epson WorkForce 435 printer.
3. Open your document or photo which you need to print on your iPhone.
4. Click the Share icon and choose your printer name.
5. Set the desired configurations and tap Print.
6. Now the Epson WorkForce 435 printer starts to print your document or photo.

Steps: Epson WorkForce 435 AirPrint Setup

1. The AirPrint setup can be executed only in the Apple and Mac devices.
2. The Epson WF-435 setup is nothing but connecting your printer and Apple device to the same network of a router or access point.