Epson WorkForce-310 Setup Guidance

  • Unpack the Epson WorkForce 310 printer after purchasing it from the manufacturer’s store.
  • You can find the printer components provided in the printer "box".
  • The components are the "phone cable, AC power cord, ink cartridges, and installation CD".
  • "Unpack" the AC power cable provided in the printer box.
  • Plug an end of the cable to the power port of the Epson WorkForce-310 setup and the other end to an electrical outlet directly.
  • "Turn on" the Epson WorkForce 310 printer by using its power key.
  • "Configure" the settings like the Language, Country / Region, and more.
  • "Raise" the scanner lid at the top of the Epson WorkForce 310 printer.
  • Also, raise the access cover of the cartridge.
  • Take the new cartridges provided in the printer box.
  • "Shake" the cartridges for 4 to 5 times and unpack it.
  • "Peel off" the yellow-colored tapes from the cartridges.
  • Insert the ink cartridge into the respective holders of the Epson WorkForce 310 printer.
  • "Close" the access cover and scanner lid.
  • "Pull" the paper support and pull its extensions. Raise the stopper.
  • Move the edge guide to the left of the Epson WorkForce 310 printer.
  • Load suitable sheets in the tray with the print side facing up. Fix the sheets by adjusting the guides.
  • "Connect" the power cable of the Epson WorkForce printer.
  • "Execute" the connection between your Epson WorkForce-310 setup and computer.

Epson WorkForce-310 Driver Download

Epson WF-310 Printer Software for the Windows

Driver for Epson WorkForce-310 Printer
  • Size: 40.91 MB.
  • Driver file extension: .exe.
  • Date of release: 12.12.12.
  • Driver file name: epson15010.exe.

Epson WorkForce-310 Printer Software for the Mac

Driver for Epson WorkForce-310 Printer
  • Driver file name: epson19124.dmg.
  • File size: 15.1 MB.
  • Date of launch: 22.09.17.
  • The software is compatible with the Mac operating system of any versions.

Epson WorkForce 310 Manual Download

Using the manual, you can find guidelines to set up the Epson WorkForce 310 printer after purchasing it.

Manual for Epson WF-310 Printer

Guidelines for Epson WF-310 Driver Installation

  • Install the software for the Epson WorkForce-310 setup after downloading it.
  • The installation procedure slightly varies depending on the OS version of your computer or laptop.
  • For detailed instructions to install the software for the Epson WorkForce 310 printer, reach our customer support team.

Steps: Epson WF-310 Double-Sided Printing

  • On your computer or laptop, open your document for printing using any related application.
  • Go to the File menu and select the Print option.
  • Choose the name & model of your printer and select Preferences or Properties.
  • Go to the Main tab and configure the basic print settings.
  • Do not forget to set the double-sided printing option.
  • Configure the other settings and tap Print to begin the printing process.
  • For more guidelines to execute the double-sided printing process, call our technical experts.
Epson WorkForce-310 Setup

Epson WorkForce-310 Wireless Setup Guidance

  • Make sure that you have downloaded the recent version of the full feature Epson WorkForce 310 printer software on your computer.
  • Install the driver.
  • Set the wireless connection while installing the software.
  • Follow the prompts on the screen & complete the wireless setup.

Epson WF-310 Printer Wi-Fi Direct Guidance

  • Locate the Wi-Fi Setup option on the control panel of the Epson WorkForce-310 Setup by using the arrow keys and select it.
  • Choose Wi-Fi Direct Routerless Setup.
  • Specify the passkey for the Wi-Fi Direct passkey mode.
  • Follow the prompts on the display & complete the Wi-Fi Direct setup.

How to Change Ink Cartridge in Epson WF-310 Printer?

  • Open the scanner lid found at the top of the Epson WorkForce 310 printer.
  • Raise the access cover of the toner cartridge.
  • Lift the tab of the cartridge which you need to replace.
  • Remove the cartridge from the Epson WorkForce-310 setup.
  • Take a new cartridge for replacing the old one.
  • Shake the cartridge for 4 to 5 times and unpack it.
  • Peel off the yellow colored tapes at the bottom of the cartridge.
  • Insert the new cartridge into its holder.
  • Gently press the cartridge until it fits into the holder.
  • Close the cartridge cover and scanner lid at the top of the printer.
  • Tap OK on the control panel of the Epson WorkForce 310 printer.
  • Follow the instructions on the screen and complete the ink cartridge replacement process.

Epson WorkForce-310 Setup Troubleshooting Guidance

Fixing problems with the Epson WorkForce 310 printer is not rocket science. Get easy and simple solutions from our technical experts to solve any issues with the printer. Also, find quick solutions for some common problems that occur with the printer in the following topics.

How to Reset Epson WF-310 Printer?

  • Tap the Home key on the control panel of the Epson WF-310 printer.
  • Select Setup and choose System Administration.
  • Specify the passkey for the administration.
  • Navigate to the Restore Default Settings option and select it.
  • Choose Clear All Data and Settings.
  • Tap Yes to confirm the process and begin to reset the Epson Workforce-310 setup.

Fixed: Epson WF-310 Cartridge not Recognized Issue?

  • Check that the cartridges are fixed into the respective holders of the Epson WorkForce 310 printer.
  • If you find that the cartridges are damaged, replace them with a new set.
  • It is recommended to use genuine cartridges to get rid of any issues with it.
  • Also, make sure that you use the cartridges that are compatible with the model of the Epson WorkForce 310 printer.
  • To avail more solutions to fix the ink cartridge not recognized issue, reach our well-qualified technical experts.

Solved: Epson WorkForce-310 not Printing Black

  • Check the ink level of the black ink cartridge of the Epson WorkForce 310 printer.
  • Power off the Epson WorkForce printer.
  • Disconnect all the cables of the Epson printer.
  • Wait for few minutes and reconnect the cables.
  • Print a Test Page and check if the issue is fixed.
  • If the issue persists, remove the black toner cartridge from the printer.
  • Check for any damage on the cartridge.
  • If you find any damage on the black cartridge, replace it with a new one.
  • Make sure that you have installed the cartridge into the respective place.
  • For more solutions to solve the Epson Workforce-310 setup not printing in black issue, call our technical experts.
xx
printer setup support