How To Do Epson WF-C5790 Setup?

Follow the steps below to do Epson WF-C5790 setup.

  1. Unpack the printer and the accessories from the carton.
  2. Remove the protective tapes from the printer.
  3. Open the scanner unit from the left and remove the packaging material present inside the printer.
  4. Connect the power cord to the printer and turn it on.
  5. Unlock and open the ink pack tray cover.
  6. Press the ink tray until it clicks. Then it will eject automatically.
  7. Now, you have to remove the ink pack from the tray carefully.
  8. Hold the handle and shake it gently before removing it from the sealed packaging.
  9. Insert the ink pack into the ink pack tray and then push the tray into the printer.
  10. Pull the paper tray from the bottom of the printer, move the paper guides to the corners, and place a stack of paper on it. Move the guides close to the paper edges and push the paper tray into the printer.
Epson WF-C5790 Setup
  1. Connect the Fax cable to the LINE port on the printer. Follow the instructions on the printer’s LCD to set up Fax.
  2. Install the printer software on your computer and connect the printer to it.

EPSON WF-C5790 DRIVER DOWNLOAD

steps to do Epson WF-C5790 setup for driver download.

Driver For  Printer

You can download the Epson WF C5790 driver from the official Epson Support page.

  1. Open the browser and enter the Epson support URL in the address bar.
  2. Enter Epson WF C5790 in the search bar and press the Enter button.
  3. Click the Downloads tab, choose the correct operating system, then extend the driver tab.
  4. Click the Download button beside the required driver and the Epson WF C5790 driver will be downloaded.

EPSON WF C5790 MANUAL DOWNLOAD

User Manual for Brother MFC-L2690DW Setup
  1. Open the default browser on your Windows or Mac computer.
  2. Enter the URL for the Epson Support page and press the Enter button.
  3. In the search bar, type the Epson model number WF C5790 and press the Enter button.
  4. Click the Manuals and Warranty tab on the page.
  5. Scroll down the list and choose your manual. Click the download link located right next to the user manual to download it in PDF.

EPSON WF-C5790 SETUP FOR DRIVER INSTALLATION

  1. Once the driver is downloaded to the computer, open the downloads section in the browser.
  2. Double-click the file to run the installation.
  3. The Epson setup wizard will now open.
  4. Accept the license agreement, then choose the software to be installed.
  1. Choose the type of connection when prompted and follow the on-screen instructions.
  2. The driver installation for the Epson WF C5790 printer will be completed.

EPSON WF C5790 WIFI SETUP

Guidelines to do Epson WF-C5790 setup for WiFi connection.

 
  1. Turn on the printer, router, and computer.
  2. Make sure you know the SSID and password of the wireless network.
  3. Press the Home button on the printer.
  4. Now, press the Network/Wi-Fi icon on the printer screen.
  5. Choose Router followed by Start Setup or Change Settings.
  6. Next, you have to choose Wi-Fi Setup Wizard.
  7. If your router’s SSID is displayed, select it. Otherwise, enter the SSID manually.
 
  1. Enter the password of the wireless network and then choose Start Setup.
  2. Press OK > Home.
  3. Now, once the printer is connected to the wireless network, install the printer software that is connected to the same network and add the printer to the computer.
  4. While installing the printer software, make sure to choose Wireless as the connection type.

EPSON WF-C5790 SETUP FOR SCANNING

There are different methods to perform a scan on the Epson WF-C5790 printer. They are:

  1. Scanning from the Control Panel
  2. Scanning from the Epson Scan Utility
  3. Scanning from the Smart program

The simplest step is scanning from the printer Control Panel.

  1. Place the documents on the scanner glass.
  2. Press the Home button, then select the Scan button.
  3. Select the scan required option, follow the instructions, and complete the scanning process.

EPSON WF-C5790 SCANNER DRIVER

  1. You can have the scanner driver from the Epson Official Support page.
  2. Open the browser and enter the Epson support URL in the address bar.
  3. Enter Epson WF C5790 in the search bar and press the Enter button.
  4. Click the Downloads tab, extend the driver tab.
  5. Please scroll down the page and select the option Scanner Driver and Epson Scan Utility option, click the Download button located right next to it.

EPSON WF-C5790 SCAN TO EMAIL

Follow the procedure to do Epson WF-C5790 setup for email scanning.

  1. Open the document cover and keep the original document face down on the scanner glass.
  2. Make sure that you have installed the scanner software on the connected computer.
  3. Also, you must have configured the email server in order to scan a document and send it as an email message.
  4. Press the Home button on the printer, then choose Scan followed by Email.
  5. Select the recipient or select Keyboard and enter the recipient email address.
  6. Select Scan Settings and make the required settings.
  7. Select Presets to save the scan settings.
  8. Finally, press Send. The document will be scanned and sent as an email.

To configure Email Server

  1. Press the Home button.
  2. Select Settings > General Settings > Network Settings> Advanced > Email Server > Server Settings.
  3. Now, choose the required mail server settings.
  4. Select Proceed > Close > Connection Check.
  5.  

EPSON WF-C5790 SCAN TO COMPUTER

Refer to the steps below to do Epson WF-C5790 setup for computer scanning.

  1. Keep the document to be scanned on the scanner glass.
  2. Check if the printer and computer are connected.
  3. Press the Home button on the printer.
  4. Select the Scan option followed by the Scan To option.
  5. From the available Scan To options, choose Computer (WSD).
  6. Complete scanning with the on-screen instructions.

EPSON WF C5790 INK REFILL

  1. Unlock and open the front cover of the printer.
  2. Press the ink tray until it clicks and then pulls out.
  3. Now, you have to remove the used ink pack from the tray carefully.
  4. Hold the handle and shake it gently before removing it from the sealed packaging.
  5. Insert the new ink pack in the ink tray.
  6. Slide the ink pack tray into the printer until it clicks in place.
  7. Move the slider to close the cover.

EPSON WF-C5790 RECOVERY MODE

Carry out the steps below to do Epson WF-C5790 setup for recovery mode.

  1. The Recovery Mode error occurs because of interruption due to the Firmware update. 
  2. Remove all the connected cables from the printer.
  3. Turn off the printer.
  4. Remove the power cord from the power source and wait for 3 minutes before you plug it back into the power source.
  5. Turn on the printer.

EPSON WF C5790 FIRMWARE UPDATE

  1. Open the Epson Support page.
  2. Type Epson WF C5790 in the search bar and press the Enter button.
  3. Click the Downloads tab.
  4. Scroll down the page and expand the Firmware option.
  5. Click the Download button next to the Firmware option.
  6. Run the downloaded file and the Firmware for the Epson WF C5790 will be updated.

EPSON WF C5790 TROUBLESHOOTING

Some of the troubleshooting procedure while to do Epson WF-C5790 setup

Epson WF C5790 printer has its fair share of problems. We will now be describing some of the common problems you are bound to face on the Epson WF C5790 printer.

Your Epson printer will have an error message on the LCD screen when it is faulty. Some of the error messages and the solutions are:

  1. Paper Jam: Lift the scanner unit and remove the jammed paper from the printer.
  2. Paper Jam in ADF: Remove the jammed paper and the fragments stuck in the Auto Document Feeder.
EPSON WF-C5790 SETUP

EPSON WF-C5790 OFFLINE

  
  1. Click the Windows icon at the bottom left corner of the desktop screen and select the Control Panel option.
  2. Click the Devices and Printers option from the Control Panel window.
  3. You will see the list of the printer(s) connected to your computer.
  4. Perform a right-click on the Epson printer and select the option See what's printing?
  5. See if you have any pending print jobs and make sure to remove them from the list.
  6. Click the Printer option on the top left corner and see if you have enabled the option Use Printer Offline. If yes, then deselect the option.
  7. Ensure if the Epson printer is connected to your computer correctly if you are using a wired connection (USB).
  8. One more alternative way would be to turn off both the Windows computer and the Epson printer and then turn them back on.
  9. If either of the steps did not solve the problem, go to the Epson Support page, download the printer driver, and install it on the computer after removing the existing driver.

EPSON WF-C5790 PAPER JAM ERROR

Steps to do Epson WF-C5790 setup for paper jam error.

  1. Paper Jam usually occurs inside the Epson WF C5790 printer.
  2. Open the scanner unit, then remove the jammed paper and the fragments from the printer. Close the scanner unit.

EPSON WF-C5790 WON'T SCAN

  1. Make sure the Epson WF C5790 printer is turned on and all the wires connecting the printer are secure.
  2. If you are performing a scan through the Auto Document Feeder, you have to check the document cover and see if the ADF is securely closed.
  3. You need to make sure the Epson Scan Utility is selected as the default scanning product.
  4. Make sure the printer is not in sleep mode.
  5. Check for the connection using the Epson Scan Utility. Click the Windows icon and select the Epson Scan Utility. Click the Other tab and click on the Reset button.

EPSON WF-C5790 WON'T PRINT BLACK

 
  1. If the Epson WF C5790 printer is not printing in black, then probably the printer must have run out of black ink.
  2. You can order for the Authorized Epson ink cartridge.
  3. Open the front cover and press the black ink tray. The tray will now eject out of the printer.
  4. Remove the used ink pack and install a new black ink pack in the tray.
  5. Push the ink tray into the printer.
  6. Close the ink tray cover.
  7. If you are still not able to print in black, then check for clogged nozzles and clean the printhead. If you need remote assistance for Epson WF-C5790 setup, click the call button available on the screen.
printer setup support