How To Do Epson Stylus NX420 Setup?

Follow the below procedure for Epson Stylus NX420 setup.

  1. Unpack Epson Stylus NX420 from the carton box along with the ink cartridges, power cord, user manual, installation manual, and installation CD.
  2. Remove the protective tapes surrounding the printer.
  3. Take the power cord and connect the printer to the power source.
  4. Turn on the printer.
  5. Select the language using the navigation buttons on the printer and then press start.
  6. Lift the scanner unit, open the cartridge cover on the right and insert the ink cartridges into the slot according to the respective colors.
  7. Open the paper support and then the extensions from the back of the printer.
Epson Stylus NX420 Setup
  1. Take a stack of paper and place it in the tray and then bring the edge guide close to the edges of the paper.
  2. Later on, proceed with the Epson driver download and installation on your computer to connect the printer to it.

EPSON STYLUS NX420 DRIVER DOWNLOAD

Carry out the steps below to do Epson Stylus NX420 setup for driver download

Driver for Printer
  1. You can have the driver for the Epson Stylus NX420 downloaded from the official Epson support page.
  2. Open a browser and enter the Epson support URL in the address bar.
  3. Enter Epson Stylus NX420 in the search bar and press the Enter button.
  4. Click the Downloads tab, choose the operating system, and extend the driver tab.
  5. Click the Download button beside the required driver.
  6. The Epson Stylus NX420 driver will be downloaded.

EPSON STYLUS NX420 MANUAL DOWNLOAD

User Manual for Brother MFC-L2690DW Setup
  1. Enter the Epson URL in the address bar of a browser and press the Enter button.
  2. The Epson page will open.
  3. Enter the Epson printer model --- Stylus NX420 --- in the search bar and press the Enter button.
  4. Click the Manuals & Warranty tab on the page.
  5. Scroll down to the required manual and click the Download button right next to it.

EPSON STYLUS NX420 DRIVER INSTALL

Steps to do Epson Stylus NX420 setup for driver installation.

  1. Since the Epson Stylus NX420 comes with the installation CD, the installation process is quite simple.
  2. Insert the printer installation CD into the computer and wait for the CD to be read.
  3. The Epson software will open. Select the type of connection (Wireless or USB Connection) from the list shown and follow the on-screen instructions.
  4. Select the option Set up printer for the first time and follow the instructions as displayed in the setup wizard.

HOW TO INSTALL EPSON STYLUS NX420 WITHOUT CD

  1. If you don’t have the installation CD, then you can download the printer driver to install it on your computer.
  2. Once the Epson driver is downloaded to the computer, open the downloads section in the browser.
  3. Perform a double-click on the downloaded file to run the installation.
  4. Click on the checkbox that reads, "I agree to the terms in the license agreement."
  5. Follow the on-screen instructions.
  6. Choose the type of connection and follow the on-screen instructions.
  7. The driver installation for the Epson Stylus NX420 printer is now complete.

EPSON STYLUS NX420 WIFI SETUP

Refer to the steps below to do Epson Stylus NX420 setup for wireless connection.

 
  1. Once you have the Epson printer driver downloaded from the official Epson support page, the next step is choosing the connection type for the Epson Stylus NX420 printer.
  2. Before proceeding, you need to ensure you have the SSID and the password of your wireless network.
  3. Now, run the installer for the Epson printer driver.
  4. You will be prompted to select the type of connection.
  5. Click the Wireless Connection and click the Next button. On the next page, select the option 'Set up printer for the first time.'
 
  1. You will then again come across a screen where you will be prompted to select either Temporary USB connection or Select using Printer buttons. Here, select the printer buttons option (simpler).
  2. Press the start button and then select the Network option using the navigation buttons on the printer.
  3. You will find the network name on the list. Now, press the Start button.
  4. If your wireless network is password protected, you have to enter the password using the keypad provided in the control panel.
  5. The Epson printer will take a minute or two to configure the wireless network settings and then it will get connected to the wireless network.

HOW TO REPLACE INK CARTRIDGE EPSON STYLUS NX420

Procedure to do Epson Stylus NX420 setup for ink cartridge replacement.

  1. Turn on the Epson Stylus NX420 printer.
  2. You will see the message on the screen to replace the cartridge. This is when you have to lift the scanner unit.
  3. On the right side, you will find the cartridge cover. Slowly open the cover.
  4. Squeeze the tab to remove the cartridge from the slot and keep it aside.
  5. Shake the new cartridge before you take it out of the sealed packaging.
  6. You have to remove the yellow tape from the bottom of the cartridge and place the cartridge in the respective slot.
  7. Push the cartridge into the slot until you hear it click.
  8. You can perform the same procedure for the other color cartridges.
  9. Close the cartridge cover and then lower down the scanner unit.

HOW TO CHECK INK LEVELS ON EPSON STYLUS NX420

  1. On the desktop of your computer, locate and perform a double-click on the Epson icon.
  2. The icon will show you the ink levels on each of the cartridges installed on the printer.
  3. Whenever you find the ink status to be low, you can replace the ink cartridges on the printer with the steps explained right above.

HOW TO SCAN ON EPSON STYLUS NX420

Steps to do Epson Stylus NX420 setup for scanning

  1. Scanning from the control panel is a much easier process compared to scanning from the Epson Scan Utility.
  2. Place the documents to be scanned on the printer’s scanner glass.
  3. Press the Scan button on the control panel and select the type of scan you want to perform.
  4. You have the option of scanning the document to PC/Email or PDF.
  5. Press the Start button to begin scanning.

EPSON STYLUS NX420 SCAN MULTIPLE PAGES

     
  1. Place the document on the glass of the Epson printer.
  2. Open the Epson Scan Utility on your computer.
  3. Select the Office Mode option from the Mode drop-down list.
  4. Select the scanning resolution, document source, orientation, and destination where you want to save the scanned images.
  5. Click the Preview button and the utility will show you the preview of the scan.
  6. Click the Scan button to open the File Save Settings window.
  7. Select the type from the Image Format list and click the OK button.
  8. The Epson scan will ask if you like to add more pages. Click the Add page button.
  9. Finally, select the OK button and the document will be saved in your destined location. 

EPSON STYLUS NX420 PRINT FROM IPHONE

Proceed with the instructions to do Epson Stylus NX420 setup for mobile printing.

  1. Since the Epson Stylus NX420 does not support the AirPrint feature, there is one alternative to print from an iPhone. You can download the Epson iPrint app from the Apple Store for this purpose.
  2. Turn on your iPad.
  3. Tap on the App Store icon to launch it, then search for Epson iPrint.
  4. When the App page opens, tap the Get button and the app will be downloaded.
  5. Make sure the iPad is connected to the same network as the Epson printer.
  6. Add the Epson printer to the app.
  7. Select the media you want to print and complete the process.
Epson Stylus Nx420 Setup

EPSON STYLUS NX420 SCAN TO COMPUTER

  1. Place the documents to be scanned on the scanner glass.
  2. Press the Scan button on the printer and select the type of scan you want to perform.
  3. Select the option Scan to Computer and then select a destination to save the scanned documents.
  4. Hit the Scan button and the process is complete.

HOW TO CONNECT EPSON STYLUS NX420 TO LAPTOP

  1. The process of connecting Epson Stylus NX420 to the laptop is much similar to that of the wireless setup function.
  2. Insert the installation CD that comes along with the printer to the laptop CD drive.
  3. Run the installation from the CD and follow the on-screen instructions.
  4. Select the option Set up the printer for the first time and click the Next button.
  5. Press the Start button and then select the Network option using the navigation buttons on the printer.
  6. You will find the network name on the list. Press the Start button.
  7. Enter the network password using the keypad provided in the control panel.
  8. Follow the on-screen instructions and complete the Epson Stylus NX420 setup to connect the printer to the laptop.

EPSON STYLUS NX420 TROUBLESHOOTING

If the printer is not maintained properly, then it is subject to face certain issues. When there is an issue on the printer, the product status message will be displayed. Some of the common issues that occur on the Epson Stylus NX420 printer are related to printing, scanning, ink cartridge installation, paper jams, paper feeding, printer connection, etc. In most cases, following the instructions on the printer will help you fix the issue. However, immediate support for the Epson Stylus NX420 setup, you can contact our technical experts.

printer setup support