THE EPSON STYLUS NX415 SETUP

The Epson Stylus NX415 printer uses the 4-color (CMYK) drop-on-demand MicroPiezo inkjet technology to perform the print, scan, and copy operations. Carry out the steps to complete the Epson stylus NX415 setup.

Epson stylus NX415 setup

Some cool features and benefits of using this printer are listed.

  1. Borderless photos, PC-Free.
  2. Quick, high-quality scanning.
  3. Instant copies.
  4. Two-sided printing.
  5. Reduce costs.
  6. Standard ink set included.

Inside the product box, you can find the following components:

  1. Epson Stylus NX415 all-in-one.
  2. User manual.
  3. Software CD-ROM.
  4. 4 Genuine ink cartridges.

START HERE

  1. First, remove all the packing tapes surrounding the Epson Stylus NX415 all-in-one printer.
  2. Now, connect your printer into an electrical outlet using the power cable.
  3. Press the Power (or ON) button on your printer’s control panel to turn it ON.
  4. Select a language from the drop-down menu. 
  5. Now, raise the cartridge cover of the printer.
  6. Shake the ink cartridges 4 to 5 times and then unpack them.
  7. Make sure to insert the ink cartridges correctly into their slots.
  8. Lower the scanner cover.
  1. Press the Power button.
  2. Now, the ink cartridges will be charged on your printer.
  3. Once it is done, open the paper support of your printer.
  4. Now, pull up the extensions correctly. 
  5. Make sure to load a stack of plain paper correctly in the paper support.
  6. Now, open the output tray and pull the extension out of the printer.
  7. Make sure to raise the stopper.
  8. Now, begin the driver installation process on your Windows or Mac computer using software CD or the downloaded driver file.
  9. Once the Epson stylus NX415 driver setup process is completes, try a test print.

EPSON STYLUS NX415 DRIVER WINDOWS 10

Driver for  Printer

Driver and Utilities Combo Package is the recommended Epson Stylus NX415 printer driver for Windows 10. If required, you can also download other driver files such as Printer Driver v6.62, scanner driver, and EPSON Scan Utility v3.75 from the printer’s support page.

DOWNLOAD

  1. Visit the Epson printer’s official site.
  2. Select your Epson printer model.
  3. Now, on your printer’s support page, click the Downloads tab.
  4. Select the Windows 10 option from the operating system drop-down menu.
  5. Choose the driver file you want and click Download.

Installation

  1. Once the selected driver file has been downloaded, open it to begin the software installation.
  2. Your printer should not be connected to the computer yet.
  3. Perform the on-screen prompts to complete the Epson stylus NX415 driver setup.
  4. Finally, try a test print.

EPSON STYLUS NX415 DRIVER MAC

Driver for  Printer

ICA Scanner Driver v5.8.7 for Image Capture is the recommended Epson Stylus NX415 printer driver for macOS.

Download

  1. Click the Driver Download for Mac button provided on the screen.
  2. Now, the driver file available for the Mac OS will be downloaded on your computer.

Installation

  1. Double-click on the downloaded driver file.
  2. If prompted, enter your Mac computer’s password in the given field.
  3. Finish the driver installation by carrying out the on-screen instructions.

EPSON STYLUS NX415 MANUAL DOWNLOAD

User Manual for Brother MFC-L2690DW Setup
  1. Click the Manual Download button provided on this page.
  2. Now, a soft copy of the Epson stylus NX415 setup manual will be downloaded. 

HOW TO INSTALL EPSON STYLUS NX415 WITHOUT CD

If your printer’s setup CD has been damaged or lost, then you can download the driver file from the printer’s support page or this page to perform the software installation.

Installing Epson Stylus NX415 without using CD

  1. First, download the printer driver from the printer’s support page or this page.
  2. After downloading the printer driver file, open it to begin the software installation.
  3. You have to connect the printer to your computer only when prompted during the driver installation. 
  4. When prompted, select the software installation type.
  5. Once the driver installation process completes, try a test print.

EPSON STYLUS NX415 WI-FI SETUP

  1. The Epson Stylus NX415 printer does not support Wi-Fi connectivity. This printer only supports the USB connection. So, if you wish to connect your printer to the computer, then you can do it only over a USB cable connection Epson stylus NX415 wifi setup is not available. 
  2. To do so, first, get a USB cable that is compatible with your printer.
  3. Once you have the cable, you’re ready to perform the software installation.
  4. Open the printer driver file on your computer.
  5. On the Software Installation screen, select the Install driver for the USB connection (recommended) option.
  6. Connect your printer and computer using the USB cable.
  7. For Mac: If prompted, enter your Mac computer’s password in the given field.
  8. Complete the USB setup process by following the on-screen instructions.

HOW TO REPLACE INK CARTRIDGE EPSON STYLUS NX415

Replacing an empty ink cartridge

  1. First, get the replacement ink cartridge.
  2. Next, power on your Epson printer if it is turned OFF.
  3. Raise the scanner cover of your printer.
  4. Gently remove the empty ink cartridge from your printer.
  5. Shake and unpack the new ink cartridge.
  6. Insert new ink cartridge into its slot properly.
  7. Now, lower the scanner cover and try a test print to check the ink quality.

HOW TO CHECK INK LEVELS ON EPSON STYLUS NX415

Checking the ink levels using the printer’s control panel

  1. Power up your printer first.
  2. Go to the Setup menu on your printer’s control panel.
  3. Select the Ink Levels option by using the arrow buttons.
  4. Now, the ink levels of your printer’s ink cartridges will be displayed on the screen.
  5. To return to the main screen of your printer, press the Back button.

EPSON STYLUS NX415 PRINT FROM IPHONE

The Epson stylus NX415 setup printer does not support the print operation from the iPhone or any hand-held devices. You can either print a document from a computer or a memory card. The section below explains how to print a photo from a memory card.

  1. Turn on your printer.
  2. Load a photo paper into the tray.
  3. Locate the memory card slot.
  4. Insert the memory card containing the document you want to print.
  5. Now, press the Memory card button on your printer’s control panel.
  6. Select the View and Print Photos option.
  7. Choose the photo you want to print.
  8. Set the number of copies and other preferences as per your need.
  9. Finally, press the Start button. 
  10. Now, the selected document will be printed by the printer.
  11. After completing the print operation, make sure to remove the memory card from your printer. 
Epson stylus NX415 iPhone setup

HOW TO SCAN ON EPSON STYLUS NX415

  1. On your Epson printer’s scanner glass, place the original document you want to scan.
  2. Launch the Epson Scan software on your computer.
  3. Set the scan preferences as per your desire.
  4. Finally, click the Scan button.
  5. Now, the document will be scanned by the printer.
  6. Now, complete the Epson stylus NX415 scanner setup.

EPSON STYLUS NX415 SCAN MULTIPLE PAGES

Scanning multiple pages manually

  1. Open the scanner cover and place the first page of the document you want to scan.
  2. Now, launch the EPSON Scan application on your computer.
  3. Select an appropriate mode from the drop-down menu.
  4. Similarly, choose the Image Type, Destination, Target Size, and other settings as per your desire.
  5. After setting the scan preferences, click the Preview button to preview the edited settings.
  6. If the settings are okay, click the Scan button.
  7. Now, the first page of your document will be scanned by the printer.
  8. Once the document has been scanned, the Add Page Confirmation dialog box will appear on your computer screen.
  9. Click the Add Page button in the dialog box.
  10. Place the second page of the document and click Scan.
  11. Similarly, scan all the pages of the document. 
  12. Once all the pages have been scanned, click the Save File button on the Add Page Confirmation dialog box.

EPSON STYLUS NX415 SCAN TO COMPUTER

Scan to Computer

  1. First, you have to make sure your Epson printer is connected to the computer.
  2. Now, load the document you want to scan on your printer’s scanner glass.
  3. Launch the EPSON Scan application on your computer.
  4. Set the scan preferences as per your desire.
  5. Make sure to select the Destination, Document type and other preferences correctly.
  6. Now, click the Scan button in the EPSON Scan dialog box.
  7. Once the document is scanned, the Add Page Confirmation dialog box will appear on the screen.
  8. Now, if you wish to continue the scan process, then click Add Page. 
  9. To modify the scanned document, click the Edit Page button.
  10. Click the Save File button in the Add Page Confirmation dialog box and select the location to store it.

HOW TO CONNECT EPSON STYLUS NX415 TO LAPTOP

  1. You can connect your Epson Stylus NX415 printer to a laptop only over a USB cable connection. 
  2. First, make sure that you have a USB cable that is compatible with your printer.
  3. Now, insert the printer software CD into your laptop or open the printer driver file.
  4. On the Software Installation screen, select the Install driver over a USB cable connection option and connect the printer to your laptop using the USB cable.
  5. Complete the driver installation by following the on-screen instructions. And complete the Epson stylus NX415 setup.
printer setup support