HOW TO DO EPSON M105 SETUP?

Epson M105 is a monochrome inkjet printer that supports Wi-Fi connectivity. The life span of the ink is up to a maximum of 6 months. To perform the initial hardware Epson M105 setup, carry out the quick steps given here.

  1. Unpack the Epson M105 printer.
  2. Power up the printer after connecting its power cord to an electrical outlet.
  3. Raise the ink tank cover and open the ink tank’s cap.
  4. Unpack a new ink bottle.
  5. Remove the bottle cap and then fill the ink.
  6. Close the bottle cap followed by the ink tank cap.
  7. Close the printer’s ink tank cover properly.
  8. Open the paper support and pull its extension.
  9. Open the printer’s output tray and pull out the paper stopper.
  10. Move the edge guide, load some paper, and align the edge guide.
  11. Proceed to install the Epson printer driver on your computer and connect the printer to the computer.
Epson M105 Setup

EPSON M105 SETUP FOR MAC

Driver for  Printer
  1. Download the Epson M105 printer driver by clicking the Driver Download button on this page.
  2. Alternatively, click go to the official Epson page.
  3. Choose Mac as your operating system, select the driver, and click the Download button.
  4. This will download the printer driver on your Mac computer.
  5. Go to the Downloads folder and double-click the driver installer.
  6. Carry out the on-screen instructions to finish the installation.

EPSON M105 DRIVER FOR WINDOWS

How To Download Driver for Epson WF M105 Printer
  1. Access the official Epson page and navigate to Downloads.
  2. The OS of your computer will be detected automatically. Check if the Windows OS is selected as the operating system.
  3. Click Download next to your printer driver file.
  4. This will download the Epson M105 printer driver on your Windows computer.
  5. Alternatively, click the Driver Download button available on this page.
  6. After downloading it, double-click the printer driver file.
  7. Proceed with the prompts to complete the installation.

EPSON M105 USER MANUAL

User Manual for Epson M105

Click the Manual Download button provided below. This will download a soft copy of the Epson M105 printer manual to your computer.

EPSON M105 SETUP FOR WIFI

  1. Hold the WPS button on your router until the WPS LED stays lit.
  2. Within 2 minutes, hold the Wi-Fi button on the Epson M105 printer.
  3. Check if the Wi-Fi LED on the printer’s control panel turns on.
  1. This indicates that the Epson printer is connected to a wireless network.
  2. After connecting the printer to Wi-Fi, install the printer driver on your computer. While installing, choose wireless as the connection method.

EPSON M105 PRINT FROM MOBILE

  1. Connect both your Android mobile phone and the Epson M105 printer to the same wireless network.
  2. Go to the Google Play Store application, search for the Epson Print Enabler app, and tap Install -> Accept.
  3. Return to the Home screen and tap the Settings icon.
  4. Tap the search icon at the upper-right corner and enter Printing.
  5. Tap Epson Print Enabler and enable it.
  6. Select the OK option in the ‘Use Epson Print Enabler’ dialog box.
  7. Select the printer’s name for confirmation and return to the home screen.
  8. Open a web page for printing, navigate to Menu, and tap Print.
  9. If necessary, select the printer name.
  10. Set the print preferences and then tap the Print icon.

EPSON M105 SETUP FOR MOBILE PRINTING

  1. Connect both your Epson M105 printer and computer to the same wireless network.
  2. Load sheets of paper with their printable side facing up in the paper feeder.
  3. Open your document on the computer.
  4. Click File -> Print.
  5. If required, choose your printer name.
  6. Launch the Printing Preferences window by clicking the Properties button.
  7. Set the print preferences as per your requirement and then click OK.

EPSON M105 FIRMWARE UPDATE

  1. On your Windows computer, choose the Epson Software option from the Start menu. Click the Epson Software Updater option.
  2. If required, select the Epson M105 printer.
  3. Select the Firmware Updater option and click Install.
  4. Select Yes -> Agree -> OK -> Start.
  5. Once done, click the Finish option.
  6. Select the OK option in the ‘Epson Software Updater’ dialog box.
FIRMWARE UPDATE FOR EPSON M105

EPSON M105 TROUBLESHOOTING

A few of the common printer problems and their troubleshooting instructions are given on this web page. You can also get technical assistance from our support members in resolving the Epson M105 printer problems.

EPSON M105 NOT PRINTING

Simple steps for Epson M105 setup if your printer is not printing.

  1. Check if the printer is turned on.
  2. If the Ethernet or USB cable is damaged, replace it with a new one.
  3. Note: Do not use a USB hub as an intermediate for establishing a connection between the printer and your computer.
  4. If you use the wireless connectivity, both the printer and computer must be connected to the same wireless network. The placement of your router should be closer to the printer.
  5. If necessary, uninstall the existing printer software on the computer and reinstall it correctly.
  6. Set Epson M105 as the default printer.
  7. Delete any stalled print jobs from the computer.

EPSON M105 NOT CONNECTING TO WIFI

  1. If you are trying to connect the Epson M105 printer to a wireless network using the Wi-Fi Protected Setup method, make sure to press the Wi-Fi button on the printer within 2 minutes of pressing the WPS button on your wireless router.
  2. Place the wireless router closer to the printer.
  3. Avoid physical obstacles such as a microwave oven, 2.4 GHz cordless phone, or large metal objects.
  4. If necessary, disable the firewall feature on the wireless router.
  5. If you try to establish a wireless network connection using wireless network settings, enter the SSID manually for the wireless network connection.

EPSON M105 OFFLINE

Steps to do Epson M105 setup for offline mode.

  1. Make sure the Epson M105 printer is turned on.
  2. Press Win + R on the Windows computer’s keyboard.
  3. Enter Control Panel and choose the same from the search result.
  4. Click Devices and Printers, right-click the printer icon, and choose See what’s printing.
  5. Click the Printer menu and deselect the ‘Use Printer Offline’ option.

EPSON M105 PAPER JAM ERROR

  1. First, cancel the print job on the computer that is connected to the Epson M105 printer.
  2. Hold the jammed paper and remove it from the output tray and sheet feeder.
  3. Raise the printer cover and then pull out the jammed paper.
  4. Clear torn pieces of paper from the printer and close the printer cover.
  5. Resume printing by pressing the Cancel button.

EPSON M105 FACTORY RESET

  1. Turn off the printer by pressing the Power button on the control panel.
  2. Press the Network Status button and the Power button at the same time.
  3. Once the printer is turned on, the wireless network settings will be restored to factory defaults. If you need rempote assistance for Epson M105 setup, contact our technical experts.
printer setup support