STEPS FOR EPSON M100 SETUP

Epson M100 is a high performing monochrome printer with good printing speed. It uses high quality pigmented inks for printing, which makes it suitable for business purposes. Using the below procedure to complete the Epson M100 setup.

Step-1: Unpack the printer

  1. Unbox the printer from the carton.
  2. Remove all the packaging tapes and protective materials from the printer.
  3. Look for the other accessories such as power cord, ink bottles, installation CD, and user manual.

Step-2: Fill the ink tank

  1. Check the position of the transportation lock.
  2. Open the ink tank cover and then remove the ink tank cap.
  3. Unpack the initial setup ink bottle and remove its tip.
  4. Turn the bottle cap to open and unseal the bottle.
  5. Close the bottle with the cap tightly.
  6. Now, insert the ink bottle nozzle into the filling port of the ink tank.
  7. Fill the tank till the upper line and remove the bottle from the port.
  8. Close the ink tank with its cap and then close the ink tank cover.
    9.  

Step-3: Power connection

  1. Connect the supplied power cord between the printer and a wall socket.
  2. Press the power button on the printer control panel to turn on the printer.
  3. Press the Cancel button on the printer and hold it for 3 seconds to perform ink charging. The power light flashes to indicate the ink charging.
  4. When the ink charging is complete, the light stops flashing.
    5.  
Epson M100 setup

Step-4: Load paper 

  1. Flip the feeder guard forward.
  2. Draw the paper support and its extension.
  3. Pull the output tray outwards and then unfold the paper stopper.
  4. Next, move the edge guide of the paper support to the left end.
  5. Place the paper in the feeder such that the print side is facing outwards.
  6. Slide the edge guide to the paper edge and make sure it is not tight.
  7. Again, flip the feeder guard back.
    8.  

Step-5: Software installation

  1. After the printer hardware setup, install the printer software on your computer.
  2. The printer software lets you manage and control the printer from the computer.
  3. Finally complete the basics of Epson M100 setup.

EPSON M100 DRIVER FOR WINDOWS 10

Driver for Printer
  1. Download the Epson M100 printer driver from this page. read out the below steps to get Epson M100 driver setup.
  2. Otherwise, open a new tab and visit the official Epson website.
  3. Search for the printer model and go to its support page.
  4. Click the Downloads tab and choose Windows 10 from the operating system menu.
  5. Select the Download button to start downloading the driver.
  6. Now, open the downloaded driver file to begin the installation.
  7. The printer setup window will open on the screen.
  8. Read the license agreement and click Agree to accept it.
  9. Complete the driver installation by following the guided instructions.

EPSON M100 DRIVER FOR MAC

Driver for Printer
  1. Either download the printer driver from this page or go to the official Epson support page.
  2. Under Downloads, click the Operating System menu and select the Mac version from the drop-down menu.
  3. Click the Download button of the driver you want to download.
  4. After downloading the driver installer file, open it.
  5. Follow the guided instructions to finish the installation.

EPSON M100 MANUAL DOWNLOAD

User Manual for Brother MFC-L2690DW Setup
  1. Open a browser application and visit the official Epson website.
  2. Find the Epson printer’s support page and go to the Manuals and Warranty section.
  3. Click the PDF link to download Epson M100 setup manual. 
Epson M100 setup manual

EPSON M100 WI-FI SETUP

The Epson M100 printer does not support wireless network connection. Use the wired network cable (Ethernet) or USB cable connection method.

 
  1. Connect the Ethernet or USB cable between the printer and the computer.
  2. Make sure to install the printer driver on the computer.
  3. Open the driver installer and follow the instructions.
  4. Choose the connection method and complete the wired and Epson M100 wifi setup connection.

EPSON M100 HEAD REPLACEMENT

 
  1. Check if the print head is at the original position. 
  2. Turn on the printer and let the print head return to the right end.
  3. Remove the power cord of the printer to turn off the printer.
  4. Disconnect the white flat cable connected to the print head.
  5. Use a screwdriver to unscrew the print head.
  6. Carefully remove the print head.
  7. Unpack the new print head and remove the protective films.
  8. Fix the print head in its original position and screw it.
  9. Plug the flat white cable and turn on the printer.

EPSON M100 HEAD CLEANING

 
  1. Run the nozzle check on the printer and check if the print head nozzles are clogged.
  2. Proceed to clean the print head if the nozzles are clogged.
  3. Load few sheets of paper in the paper cassette.
  4. See that the printer does not indicate any errors.
  5. Press the Cancel button until the power light starts to blink.
  6. If the power light stops blinking, again run the nozzle check and make sure the print head is cleaned.

EPSON M100 MAINTENANCE BOX RESET

The maintenance box of Epson M100 is a part of the printer which stores the waste or excess ink in the printer system. 

  
  1. Unscrew the maintenance box cover on the printer.
  2. Use a thin narrow object to remove the waste from the box. 
  3. Fix the box on the printer and screw it tightly to finish Epson M100 setup.
    4.  

EPSON M100 INK REFILL

 
  1. Check the ink level in the tank before you refill the ink tank.
  2. Refill the ink tank if the ink level is below the lower line.
  3. Remove the ink tank unit cover and then open the ink tank cap.
  4. Unpack the new ink bottle and remove the seal and cap.
  5. Fill the ink tank until the ink level rises to the upper line.
  6. Take out the bottle and close the bottle.
  7. Close the ink tank with the cap and ink tank unit cover.

EPSON M100 SCANNING SETUP

The Epson M100 printer does not support the scan operation as it is a single-function printer.

EPSON M100 SCAN TO PDF

Since the Epson M100 printer cannot scan, the scan to PDF operation is not possible on this printer so, Epson M100 scanner setup is available.

EPSON M100 TROUBLESHOOTING

When the printer faces a problem, the relevant error message will appear on the display panel. Refer to the printer’s user manual to learn the basic troubleshooting steps. If you cannot solve the printer issue, contact our technical team for more support.

EPSON M100 OFFLINE

 
  1. Check if the printer is turned on. 
  2. Make sure that the Epson printer is not in sleep mode.
  3. Increase the time in the power-off timer settings.
  4. If the network or USB cable ends are loosely connected, tighten them to secure the connection.
  5. Go to the Devices and Printers screen on the Windows computer. Right-click your printer model and disable Use Printer Offline using Epson M100 setup settings.

EPSON M100 PAPER JAM

 
  1. If a paper jam occurs in the printer, cancel all the print jobs on the connected computer.
  2. Remove the jammed paper from the paper feeder and the output tray.
  3. Following it, open the printer cover.
  4. Find the stuck paper and remove them.
  5. Close the printer cover and press the Cancel button to resume printing.

EPSON M100 SCANNER ERROR

The Epson M100 printer does not support scanning, so the scanner error does not exist and need not to do Epson M100 scanner setup.

Copyright © 2021 - 2022 printer-setup.us | All Rights Reserved.

printer setup support
➤